• 제목/요약/키워드: chemical elements

검색결과 1,278건 처리시간 0.03초

Effect of metal conditioner on bonding of porcelain to cobalt-chromium alloy

  • Minesaki, Yoshito;Murahara, Sadaaki;Kajihara, Yutaro;Takenouchi, Yoshihisa;Tanaka, Takuo;Suzuki, Shiro;Minami, Hiroyuki
    • The Journal of Advanced Prosthodontics
    • /
    • 제8권1호
    • /
    • pp.1-8
    • /
    • 2016
  • PURPOSE. The purpose of this study was to evaluate the efficacy of two different metal conditioners for non-precious metal alloys for the bonding of porcelain to a cobalt-chromium (Co-Cr) alloy. MATERIALS AND METHODS. Disk-shaped specimens ($2.5{\times}10.0mm$) were cast with Co-Cr alloy and used as adherend materials. The bonding surfaces were polished with a 600-grid silicon carbide paper and airborne-particle abraded using $110{\mu}m$ alumina particles. Bonding specimens were fabricated by applying and firing either of the metal conditioners on the airborne-particle abraded surface, followed by firing porcelain into 5 mm in diameter and 3 mm in height. Specimens without metal conditioner were also fabricated. Shear bond strength for each group (n=8) were measured and compared (${\alpha}=.05$). Sectional view of bonding interface was observed by SEM. EDS analysis was performed to determine the chemical elements of metal conditioners and to determine the failure modes after shear test. RESULTS. There were significant differences among three groups, and two metal conditioner-applied groups showed significantly higher values compared to the non-metal conditioner group. The SEM observation of the sectional view at bonding interface revealed loose contact at porcelain-alloy surface for non-metal conditioner group, however, close contact at both alloy-metal conditioner and metal conditioner-porcelain interfaces for both metal conditioner-applied groups. All the specimens showed mixed failures. EDS analysis showed that one metal conditioner was Si-based material, and another was Ti-based material. Si-based metal conditioner showed higher bond strengths compared to the Ti-based metal conditioner, but exhibited more porous failure surface failure. CONCLUSION. Based on the results of this study, it can be stated that the application of metal conditioner is recommended for the bonding of porcelain to cobalt-chromium alloys.

중부 옥천대에 분포하는 쥬라기 보은 화강섬록암의 암석화학과 마그마과정 (Petrochemistry and magma process of Jurassic Boeun granodiorite in the central Ogcheon belt)

  • 좌용주
    • 암석학회지
    • /
    • 제5권2호
    • /
    • pp.188-199
    • /
    • 1996
  • 옥천대 내에서 옥천층군을 관입하고 있는 보은 화강섬록암은 그화학적 성질이 과알루미나질이며, 칼크-알칼리 계열을 따르는 화강암류이다.그리고 보은 암체를 형성한 마그마가 생성되고 관입한 환경은 활동성 대륙 주변부일 가능성이 있다. 한편, 옥천대의 보은암체를 동시대의 경기육괴의 인제-홍천암체와 비교하면 보은암체 ?이 인제-홍천암체 보다 성숙도가 낮은 대륙호의 환경에서 형성된 것임을 알 수 있다. 주성분원소, 미량원소 및 회토류원소의 함량 변화에 있어서 결정분화를 지시하는 경향성이 결여되어 나타나는 것은 화강암류의 화학적 성질을 지배하는 마그마과정이 단순한 분별작용의 모델 만으로는 설명되지 않음을 나타낸다. 또한 보은 화강암체를 형성시킨 마그마과장에 대해서 레일리 분별 및 주성분원소 함량변화에 따른 분별과정을 모델 계산을 통해 검토해 보았으나, 어느것도 보은암체이 지구화학적 경향성을 효과적으로 설명해 주지 않는다. 반면, 결정작용과 동시성 혼염작용(AFC)에 대한 모델 계산에서는 보은 화강섬록암을 형성시킨 화강암질 마그마는 옥천층군을관입하기 이전에 퇴적기원의 지각물질과의 혼염과정을 거쳤을 가능성이 제기되고, 그 때이 조건으로는 혼염되는 주변암석이 성분과 마그마의 성분이 유사하고 또한 혼염작용의 속도가 결정작용의 속도와 비슷하여 혼염되는 질량은 마그마 전체 질량의 10% 내외인 경우이다. 한편, 분별과정과 AFC모델 계산의 결과는 규장질암맥이 보은 화강섬록암으로 파생된 것이 아니라 다른 성인의 마그마로부터 유래되었을 가능성을 제시한다.

  • PDF

마다가스카르 Antandrokomby 지역 투어말린의 분광학적 특성 (Spectroscopic Characteristics of Tourmalines from Antandrokomby, Madagascar)

  • 이성;안용길;서진교;박종완
    • 한국광물학회지
    • /
    • 제22권4호
    • /
    • pp.385-393
    • /
    • 2009
  • 마다가스카르 산 투어말린의 보석광물학적 특징들을 알기 위해 물리적 특성, 원소분석, 내포물 분석, 그리고 분광분석(UV-VIS 분광기, FTIR 분광기)을 하여 다른 산지와 비교 연구하였다. 물리적 특성은 다른 산지의 것과 큰 차이를 보이지 않았다. 자외선-가시광선 분광분석 결과 녹색과 청색의 시료는 Fe 성분이 많아 $Fe^{3+}$에 의한 714~743 nm 영역에서 높은 흡수 밴드가 나타났고 분홍색은 $Mn^{3+}$에 의해 510~530 nm에서 높은 흡수를 보였다. 갈색 시편은 Mn이 많아 $Mn^{2+}-Ti^{4+}$ 전하전이에 의해서 325 nm의 자외선 영역에서 나타난 높은 흡수에 기인하였다. 또한 무색 시편에서는 $Mn^{2+}$에 의한 406~413 nm 사이의 밴드가 매우 미약하거나 Mn의 양이 적어 $Mn^{2+}$의 영향이 거의 없어 발색이 되지 않았다고 본다. 적외선 분광분석에서는 4300~4500 $cm^{-1}$ 영역에서 금속-OH의 스트레칭과 밴딩이 조합된 모드에 의한 여러 개의 흡수 밴드가 나타났다. 내포물에서는 평행한 관상 속에 적철석이 녹아있는 형태가 나타났다. 연구 결과 마다가스카르 산의 투어말린은 Cu는 검출되지 않았으나 Fe과 Mn이 모두 검출되었고 이들의 양에 따라 다양한 색상이 나타남을 확인할 수 있었고 물리적 특성과 적외선 영역의 흡수 밴드, 그리고 내포물들은 다른 산지와 큰 차이를 보이지 않았음을 확인할 수 있었다.

제주도 주변 대륙붕 퇴적물의 REE와 Sr-Nd 동위원소 조성 (REE and Sr-Nd Isotopic Composition of the Shelf Sediments around Jeju Island, Korea)

  • 김태정;윤정수
    • 한국지구과학회지
    • /
    • 제33권6호
    • /
    • pp.481-496
    • /
    • 2012
  • 제주도 주변 대륙붕해역에 분포하는 퇴적물의 기원지를 해석하기 위해 표층퇴적물의 희토류원소(REE), 주성분 및 미량원소, Sr-Nd 동위원소비를 분석하였다. 퇴적물의 화학원소에 근거한 변질지수(CIA)는 44.2-68.9(av.59.4)의 범위를 보이며 황하강퇴적물과 유사하였다. 연구지역 퇴적물을 콘드라이트로 표준화한 REE 패턴에서 대부분 LREE가 부화된($La_{(N)}/Sm_{(N)}$ >3) 작은 Eu 부(-) 이상을 가지는 전형적인 셰일의 희토류원소의 패턴을 나타낸다. UCC로 표준화한 REE 패턴에서 연구지역 남서쪽 외해지역의 퇴적물 시료들은 황하나 금강기원 퇴적물보다 양자강퇴적물과 유사한 높은 희토류원소함량과 위로 볼록한 REE 패턴을 보여 양자강기원 부유물질이 제주도 서쪽해역까지 운반되고 있음을 의미한다. $^{87}Sr/^{86}Sr$ 동위원소비와 ${\varepsilon}_{Nd}(0)$의 구분지수는 연구지역 퇴적물의 기원지를 밝히는데 지시자로 제시할 수 있었다. 연구지역의 서쪽과 북서쪽에 분포하는 대부분의 퇴적물은 황하강 퇴적물 주위에 밀집 분포하는 특징을 보이고, 양자강 하구역과 가까운 남서쪽지역의 퇴적물들은 양자강 수중삼각주 퇴적물과 유사성을 보였다. 반면 제주도 북동쪽지역의 퇴적물은 중국의 강기원 퇴적물과는 다른 지역에 위치하는 특징을 보여, 따라서 제주도 주변해역은 복합기원 퇴적물이 집적되고 있음을 의미한다.

청계천 수표교(水標橋)의 경관 향상을 위한 진단학적(診斷學的) 훼손상태 분석 (Analysis on the Damage Status by Diagnostical Methodology for the Improvement Landscape on the Supyo-bridge at Chunggae-stream)

  • 안진성;최아현;김유일
    • 한국전통조경학회지
    • /
    • 제28권3호
    • /
    • pp.105-113
    • /
    • 2010
  • 본 연구는 전통공간에 대한 보존계획에 있어서, 대상물의 가치평가를 위하여 수행되는 훼손상태조사에 대한 연구이다. 특히, 전통공간에 위치해 있는 전통 건조물의 보존에 대한 관심과 흥미를 체계화하고 있는 전문가 집단에서 가치평가의 주된 요소로써 대상물의 훼손상태는 어떠한 과정과 방법에 의해서 분석될 수 있는가? 에 대한 과정과 방법론에 관한 실험적인 연구이다. 이를 위하여 본 연구에서는 문화재 '진단학(Diagnostic)'에 대한 이해를 바탕으로 수표교에 대한 물리적 특성과 대상지 환경여건에 대한 이해를 바탕으로 수행하였다. 한편, 본 연구는 그 특성상 수표교의 훼손상태를 기록하기 위하여 작성되는 훼손상태 분포도는 사진측량 기법을 적용한 실측도면을 활용하였고, 대상물의 훼손상태를 조사하기 위한 '평가지침'은 이탈리아 정부의 건축문화재 관리지침이라 할 수 있는 'Raccomandazioni Normal'을 기준으로 하였다. 이러한 연구접근은 국외 건축문화재의 훼손상태 조사에 사용되는 표준지침의 국내 문화재로의 적용 가능성에 대한 실험적인 차원에서 이루어졌음을 밝혀둔다. 그 결과, 수표교의 각 부분별 훼손상태는 침전물에 의한 훼손과 부식 등이 주를 이루고 있었으며, 부식을 비롯한 9가지의 훼손유형의 경우에는 그 구성성분의 물리 화학적 특성과 분포상태를 고려할 때, 수표교의 안전성과 관련하여 위협적인 요소로는 작용하지 않는 것으로 판단하였다. 반면에, 경관 향상을 위하여 상판마루와 멍에석, 그리고 교각부분에서 관찰되는 'Thermoclastism(열전화)' 현상의 경우, 교각을 중심으로 넓게 분포하고 있음을 감안할 때, 훼손부위의 제거와 함께 표면강화 작업의 조속한 처리가 요구될 것으로 판단하였다.

경관훼손지의 생태적 복구방안에 관한 연구 (A Study on the Ecological Restoration Strategies for the Disturbed Landscapes)

  • 김남춘
    • 한국환경복원기술학회지
    • /
    • 제1권1호
    • /
    • pp.28-44
    • /
    • 1998
  • This study was conducted to suggest the ecological restoration strategies for the disturbed landscapes by theoretical study. Especially, it is aimed to suggest three objectives for restoration by using native plants ; (1) prevention or reduction of wind and water erosion, (2) provision of food and cover for variety of animal species, (3) improvement of the visual or aesthetic quality of disturbed sites. The main results were summarized as follows. 1. Cooperation between restoration ecologists and restoration practitioners is needed to delineate a scientific approach to restoration ; (1) Being aware of published literature that describes similar work and/or establish general principles. (2) Preparedness to carry out proper experiments to test ideas. (3) Preparedness to monitor fundamental parameters in a restoration scheme. (4) Providing information about the behavior of species. (5) Publish results. 2. There are three models of succession in theories of plant succession. The tolerance and facilitation models were recommended to ecological restoration. The inhibition model applies in most secondary succession, but the actual species which are introduced first may inhibit the germination and growth of slower-growing species, or they may prevent the growth of other species whose propagules arrive later. 3. The objectives of erosion control, wildlife habitat provision, and visual quality improvement are not mutually exclusive. However, many revegetation practices in the past have emphasized one of these aspects at the expense of the others. 4. A native plant community can be the model of ecological restoration. By stylization/abstraction of native plant community, trying to learn the most essential characteristics of community types - environmental factors ; dominant, prevalent, and "visual essence" species composition - in order to use such information in restoration. 5. After developing mass/spaces plan, match plant communities to the mass/space plan. In utilizing community grouping, there needs aesthetic ability to understand design elements. 6. Several hydrophytes such as Pennisetum saccharifluous, Themeda triandra, Cirsium pendulum show relatively good germination rates. In case of mesophytes and xerophytes, Arundinella hina, Artemisia princeps, Oenothera odorata and legumes seem to have quick-germinating abilities at barren sites. Pinus thunbergii, Rhus chinensis, Evodia daniellii, Alnus firma and Albizzia julibrissin can be considered as "late succession" woody plants because they show low germinating rates and slow growing habitat. 7. The seeds used for restoration should be collected within a certain radius of where it will be planted. Consideration in genetic issues in the collection and use of germplasm can increase the odds for successful restoration efforts. 8. The useful model in the "drift" pattern occurs so abundantly in naturally evolving landscapes. As one species diminishes in density, a second or third species are increased. Thus, dynamic interactions between species are created. Careful using of "drift phenomenon" in planting was recommended. 9. Virtually no stand of vegetation today is immune from the introduction and/or spreading of exotic species. Therefore, the perpetuation of a restored sites requires conscious monitoring and management. Thus, management would be the most important process in ecological restoration. 10. In order to keep the sites "natural", alternative management strategies would be applied in management ; Atenative management strategies are decelerating successional process, accelerating successional processes or modifying species composition. As management tools, mechanical, chemical, biological or environmental factor manipulation, e.g., fire could be used.

  • PDF

Occurrence and chemistry of pyrochlore and baddeleyite in the Sokli carbonatite complex, Kola Peninsula, Arctic

  • Lee, Mi-Jung;C. Terry Williams;Lee, Jong-Ik;Kim, Yeadong
    • 한국광물학회:학술대회논문집
    • /
    • 한국광물학회.한국암석학회 2003년도 공동학술발표회 논문집
    • /
    • pp.67-67
    • /
    • 2003
  • The chemical compositions and textural relationships of the Nb-Zr oxide minerals including pyrochlore [ideally (Ca,Na)$_2$Nb$_2$O$\sub$6/(OH,F), with up to 24% UO$_2$ and 16% Ta$_2$O$\sub$5/] and baddeleyite [ideally ZrO$_2$, with up to 6% Nb$_2$O$\sub$5/] in the Sokli carbonatite complex, Kola Peninsula, Arctic are described. These two minerals in carbonatites are the major hosts for the HFSEs such as U, Th, Ta, Nb, Zr and Hf and thus are interest both economically and petrologically. The Sokli carbonatite complex (360-370 Ma) in Northern Finland, which forms a part of the Paleozoic Kola Alkaline Province (KAP), is mainly composed of multi-stages of carbonatite and phoscorite associations (P1-C1 P2-C2, P3-C3, D4 and D5) surrounded by altered ultramafic rocks (olivinite and pyroxenite) and cut by numerous small dikes of ultramafic lamprophyre. The Sokli complex contains the highest concentration in niobium and probably in tantalum, which are economically very important to modern steel technology, among the ultramafic-alkaline complexes of the KAP. Pyrochlore and baddeleyite mostly concentrate in the phoscorites. Pyrochlores in the Sokli complex are generally rounded octahedra and cubes in shape, red brown to grey yellow in color, and 0.2 to 5 mm in size. They are found in all calcite carbonatites, phoscorites and dolomite carbonatites, except P1-C1 rocks. These pyrochlores display remarkable zonations which depend on host rock compositions, and have significant compositional variations with evolution of the Sokli complex. The common variation scheme is that (1) early pyrochlore is highly enriched in U and Ta; (2) these elements decrease abruptly in the intermediate stage, while Th and Ce increase, and (3) late stage pyrochlore is low in U, Ta, Th, and Ce, and correspondingly high in Nb. Baddeleyites in the Sokli complex occur in the early P1-C1 and P2-C2 rocks and rarely in P3. They crystallized earlier than pyrochlores, and occasionally show post-magmatic corrosion and replacement. The FeO and TiO$_2$ contents of baddeleyites are much lower than those of the other terrestrial and lunar baddeleyites, whereas Nb$_2$O$\sub$5/ and Ta$_2$O$\sub$5/ contents are the highest among the reported compositions. Ta/Nb and Zr/Nb ratios of pyrochlores and baddeleyites decrease towards later stage facies, which is in accordance with the whole rock compositions. The variation of Ta/Nb and Zr/Nb ratios of pyrochlores and baddeleyites is considered to be a good indicator to trace an evolution of the carbonatite complexes.

  • PDF

고에너지 밀링분말과 급속소결을 이용한 Ti-Nb-Zr-HA 생체복합재의 기계적 성질 및 생체적합성 (Mechanical Properties and Bio-Compatibility of Ti-Nb-Zr-HA Biomaterial Fabricated by Rapid Sintering Using HEMM Powders)

  • 박상훈;우기도;김상혁;이승민;김지영;고혜림;김상미
    • 한국재료학회지
    • /
    • 제21권7호
    • /
    • pp.384-390
    • /
    • 2011
  • Ti-6Al-4V ELI (Extra Low Interstitial) alloy has been widely used as an alternative to bone due to its excellent biocompatibility. However, it still has many problems, including a high elastic modulus and toxicity. Therefore, nontoxic biomaterials with a low elastic modulus should be developed. However, the fabrication of a uniform coating is challenging. Moreover, the coating layer on Ti and Ti alloy substrates can be peeled off after implantation. To overcome these problems, it is necessary to produce bulk Ti and Ti alloy with hydroxyapatite (HA) composites. In this study, Ti, Nb, and Zr powders, which are biocompatible elements, were milled in a mixing machine (24h) and by planetary mechanical ball milling (1h, 4h, and 6h), respectively. Ti-35%Nb-7%Zr and Ti-35%Nb-7%Zr-10%HA composites were fabricated by spark plasma sintering (SPS) at $1000^{\circ}C$ under 70MPa using mixed and milled powders. The effects of HA addition and milling time on the biocompatibility and physical and mechanical properties of the Ti-35%Nb-7%Zr-(10%HA) alloys have been investigated. $Ti_2O$, CaO, $CaTiO_3$, and $Ti_xP_y$ phases were formed by chemical reaction during sintering. Vickers hardness of the sintered composites increases with increased milling time and by the addition of HA. The biocompatibilty of the HA added Ti-Nb-Zr alloys was improved, but the sintering ability was decreased.

대청호의 수질과 남조류 독소 Anatoxin-A 농도의 관계 (Water Quality and Cyanobacterial Anatoxin-a Concentration in Daechung Reservoir)

  • 정승현;김지환;안치용;최신석;김희숙;오희목
    • 생태와환경
    • /
    • 제35권4호통권100호
    • /
    • pp.257-265
    • /
    • 2002
  • 남조류에 의해 생성되는 anatoxin-a의 양과 환경요인과의 관계를 알아보기 위해 대청호에서 2001년 6월부터 2001년 11월까지 조류 및 물 시료를 채취하였다. 환경요인 중 물리적 요인은 현장에서 측정하였고, 생물${\cdot}$화학적 요인은 실험실에서 측정하였다. 조류 및 물 시료에 존재하는 anatoxin-a의 양은 fluorescence detector를 이용하여 HPLC로 측정하였고, 조류 시료와 물 시료의 경우 각각$0.61-8.68\;{\mu}g/g\;dry wt$,$0.01-0.08\;{\mu}g/L$로 측정되었다. 음용수의 안전을 고려한 anatoxin-a의 권고기준 농도는 $1\;{\mu}g/L$로 제안되고 있다. 조류세포와 물 시료에서 anatoxin-a농도가 가장 높게 검출된 시기는 7월이었다. 독소 생성에 중요한 요인을 확인하기 위해 환경요인과 anatoxin-a농도와의상호관계를 살펴보았다. 조류 시료내 anatoxin-a농도는 nitrate,총질소와 총인 비율, 총용존질소(P<0.05)및 총입자성질소와 총입자성인 비율(P<0.05)과 높은 상관관계를 나타내었고, 물 시료내anatoxin-a 농도는 수온, 전기전도도(P<0.01), 수소이온농도, phycocyanin, phycocyanin과 엽록소 a비율 (P<0.01)과 높은 상관관계를 나타내었다.

스크류 조합과 공정변수 조절에 따른 밀기울 압출물의 특성 (Effect of Screw Configurations and Process Parameters on Characteristics of Wheat Bran Extrudates)

  • 김종태;황재관;조성자;김철진;김해성
    • 한국식품과학회지
    • /
    • 제28권1호
    • /
    • pp.169-178
    • /
    • 1996
  • 밀기울의 압출가공시 스크류의 조합과 공정변수 조절에 따른 압출물의 특성을 나타내는 target parameters(수분용해지수, 압출물의 고유점도, 보수력과 보유력, 식이섬유, 압출물의 미세구조)의 변화를 연구하였다. 수분용해지수(WSI)는 원료의 수분함량에 가장 큰 영향을 받았고, 역방향 스크류(RSE)를 5개 사용한 경우 밀기울이 13.7%인 것에 비하여 압출물은 $16.3{\sim}23.2%$의 범위로 높은 WSI를 보였다. 밀기울 압출물의 고유점도는 RSE가 $3{\sim}5$개로 증가할수록 높아져 원료 밀기울이 10.6 ml/g인 것에 비하여 $37.86{\sim}45.44\;ml/g$의 수준으로 증가하였으며, 원료의 수분함량과 압출압력에도 큰 영향을 받았다. 고유점도(IV) X 수용성 고형분(SS)의 무차원 변수와 기계적 에너지 소모율(SME)과의 관계는 높은 상관관계$(R^2=0.85)$를 보여 밀기울 세포벽 수용화 반응에 SS와 분자량 크기의 상관관계가 SME에 의하여 지배받는 인자임이 확인되었다. 압출물의 보수력은 원료의 공급량과 수분함량이 높을수록 원료 밀기울보다 높은 값을 보였고, 보유력은 원료 밀기울에 비하여 낮았다. 압출물의 수용성 식이섬유는 원료의 수분함량이 적은 조건에서 $4.32{\sim}6.48%$의 분포를 보여 원료 밀기울 2.68%보다 크게 증가하였다. 이는 압출공정이 밀기울 세포벽의 수용화에 효과적으로 작용하였음을 의미한다. 압출물의 미세구조는 원료의 수분함량에 따라서 붕괴와 용융정도의 차이를 보여 주었다.

  • PDF