• Applied Chemistry for Engineering
• /
• v.32 no.1
• /
• pp.55-60
• /
• 2021

Fluorination was carried out to improve the adsorption performance of pitch-based activated carbon fibers (ACFs) onto acetic acid. Both plasma and direct gas fluorination were used for fluorination, and the acetic acid gas adsorption performance of fluorinated ACFs was investigated. X-ray photoelectron spectroscopy (XPS) is analyzed to determine the surface characteristics of ACFs, and the pore characteristics were analyzed by 77 K nitrogen adsorption. An adsorption performance was measured through gas chromatography, and it was confirmed that the breakthrough time of plasma fluorinated sample was 790 min and that the breakthrough time was delayed compared to that of using untreated one of 650 min. However, the breakthrough time of direct gas fluorinated sample was 390 min, indicating that the adsorption performance was inhibited. The plasma fluorinated ACFs showed an increase in the adsorption performance due to an electrostatic attraction between the acetic acid gas (CH3COOH) with the fluorine group introduced to the surface without changing its specific surface area. On the other hand, the specific surface area of the direct gas fluorinated ACFs decreased significantly up to 55%, and the physical adsorption effect on the acetic acid gas also reduced.

• Clean Technology
• /
• v.27 no.1
• /
• pp.79-84
• /
• 2021

In this study, the waste activated carbon used in the painting process was filled into a cylindrical cartridge and the characteristics of desorption by low temperature gas were investigated. Adsorption and desorption experiments of toluene with activated carbon were conducted to determine the flow rate of desorption. In an experiment where desorption was performed while changing conditions at flow rates of 1, 2 and 4 ㎥ min-1, it was determined that 2 ㎥ min-1 was appropriate due to the high THC concentration and desorption time. In the early stage of the desorption of waste activated carbon, 2-butanone and MIBK (methyl isobutyl ketone) with a low boiling point were generated at a high rate in the gas component, and after that, the concentration of THC decreased and the BTX was desorbed at a high rate. The total calorific value of the gas component generated during the desorption of waste activated carbon was 316 kcal kg-1. From repeating the regeneration of waste activated carbon with toluene five times, it was observed that the iodine value and the specific surface area were relatively lower than that of new activated carbon. In the desorption experiment where two cylindrical cartridges were connected in series, the maximum THC concentration was about 470 ppm.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.48 no.2
• /
• pp.123-134
• /
• 2022

In this study, the whitening and antioxidant effects of the extracts from Hydrangea petiolaris (H. petiolaris) leaves was confirmed, and the chemical structure was identified by separating the active ingredients. In the whitening tests using α-MSH stimulated B16F10 melanoma cells, the n-hexane (Hex) fraction inhibited the cellular melanogenesis and intracellular tyrosinase activities without causing cell toxicity. In addition, the Hex fraction reduced expression of tyrosinase and TRP-2 protein. Upon the anti-oxidative studies by DPPH and ABTS⁺ radicals, potent radical scavenging activities were observed in the ethyl acetate (EtOAc) fraction. Also, for the cellular protective effects on HaCat keratinocytes damaged by H₂O₂, the EtOAc fraction indicated protective effects against oxidative stress. Eight phytochemicals were isolated from the extract of H. petiolaris leaves; ethyl linoleate (1), ethyl linolenate (2), 1-linoleoyl glycerol (3), 1-linolenoyl glycerol (4), epi-catechin (5), afzelin (6), quercitrin (7), hyperin (8). Among the isolates, the compounds 5 - 8 showed DPPH and ABTS⁺ radical scavenging activities. The contents of quercitirin, a major isolated in this extract, determined by HPLC analysis were confirmed to be about 31.3 mg/g for the 70% ethanol extract and 169.8 mg/g for the EtOAc fraction. Based on these results, it was suggested that the extract from H. petiolaris leaves could be potentially applicable as whitening and anti-oxidative ingredients in cosmetic formulations.

• Animal Bioscience
• /
• v.36 no.2
• /
• pp.256-263
• /
• 2023

Objective: Feed molecular structures can affect its availability to gastrointestinal enzymes which impact its digestibility and absorption. The molecular spectroscopy-attenuated total reflectance Fourier transform infrared vibrational spectroscopy (ATR-FTIR) is an advanced technique that measures the absorbance of chemical functional groups on the infrared region so that we can identify and quantify molecules and functional groups in a feed. The program aimed to reveal the association of intrinsic molecular structure with nutrient supply to animals from canola feedstocks and co-products from bio-oil processing. The objective of this study was to characterize special intrinsic carbohydrate and protein-related molecular structure spectral profiles of feedstock and co-products (meal and pellets) from bio-oil processing from two source origins: Canada (CA) and China (CH). Methods: The samples of feedstock and co-products were obtained from five different companies in each country arranged by the Canola Council of Canada (CCC). The molecular structure spectral features were analyzed using advanced vibrational molecular spectroscopy-ATR-FTIR. The spectral features that accessed included: i) protein-related spectral features (Amide I, Amide II, α-helix, β-sheet, and their spectral intensity ratios), ii) carbohydrate-related spectral features (TC1, TC2, TC3, TC4, CEC, STC1, STC2, STC3, STC4, TC, and their spectral intensity ratios). Results: The results showed that significant differences were observed on all vibrationally spectral features related to total carbohydrates, structural carbohydrates, and cellulosic compounds (p<0.05), except spectral features of TC2 and STC1 (p>0.05) of co-products, where CH meals presented higher peaks of these structures than CA. Similarly, it was for the carbohydrate-related molecular structure of canola seeds where the difference between CA and CH occurred except for STC3 height, CEC and STC areas (p>0.05). The protein-related molecular structures were similar for the canola seeds from both countries. However, CH meals presented higher peaks of amide I, α-helix, and β-sheet heights, α-helix:β-sheet ratio, total amide and amide I areas (p<0.05). Conclusion: The principal component analysis was able to explain over 90% of the variabilities in the carbohydrate and protein structures although it was not able to separate the samples from the two countries, indicating feedstock and coproducts interrelationship between CH and CA.

• The Korea Journal of Herbology
• /
• v.28 no.4
• /
• pp.71-76
• /
• 2013

Objectives : The biological activities and compound contents of herbal medicine vary depending on manufacturing processes. In this study, we compared anti-inflammatory effects and compound contents of three kinds of multi-herbal extract HT008 produced by different manufacturing processes in order to determine chemical and biological equivalence. Methods : HT008 was produced by three different manufacturing methods: 1. Freeze dried extract of Eleutherococcus senticosus, Scutellaria baicalensis and Angelica sinensis (HT008 FD), 2. Spray dried extract of E. senticosus and S. baicalensis combined with reflux extract of A. sinensis (HT008 SD), 3. Spray dried extract of E. senticosus and S. baicalensis combined with supercritial fluid extract of A. sinensis (HT008 SF). Anti-inflammatory effects were evaluated using acetic acid induced pain model and ${\lambda}$-carageenan induced paw edema model. Compound contents were evaluated by HPLC quantitative analysis of standard compounds of HT008, eleutheroside E, baicalin, z-ligustilide. Results : HT008 FD, HT008 SD and HT008 SF significantly decreased acetic acid induced pain index and ${\lambda}$-carrageenan induced paw edema volume compared with that of control group. There was no significant difference in efficacy among the HT008 FD, HT008 SD and HT008 SF. Standard compound contents of HT008 FD, HT008 SD and HT008 SF were quantified within the range of Korean pharmacopoeia or other research. Conclusions : Three different manufacturing methods of multi-herbal extracts have been developed without noticeable difference in the efficacy or compound contents. The results might be used to establish manufacturing process and industrialization of herbal extracts.

• Clean Technology
• /
• v.28 no.2
• /
• pp.174-181
• /
• 2022

Biomass is a sustainable alternative resource for production of liquid fuels and organic compounds that are currently produced from fossil fuels including petroleum, natural gas, and coal. Because the use of fossil fuels can increase the production of greenhouse gases, the use of carbon-neutral biomass can contribute to the reduction of global warming. Although biological and chemical processes have been proposed to produce petroleum-replacing chemicals and fuels from biomass feedstocks, it is difficult to replace completely fossil fuels because of the high oxygen content of biomass. Production of petroleum-like fuels and chemicals from biomass requires the removal of oxygen atoms or conversion of the oxygen functionalities present in biomass derivatives, which can be achieved by catalytic hydrodeoxygenation. Hydrodeoxygenation has been used to convert raw biomass-derived materials, such as biomass pyrolysis oils and lignocellulose-derived chemicals and lipids, into deoxygenated fuels and chemicals. Multifunctional catalysts composed of noble metals and transition metals supported on high surface area metal oxides and carbons, usually selected as supports of heterogeneous catalysts, have been used as efficient hydrodeoxygenation catalysts. In this review, the catalysts proposed in the literature are surveyed and hydrodeoxygenation reaction systems using these catalysts are discussed. Based on the hydrodeoxygenation methods reported in the literature, an insight for feasible hydrodeoxygenation process development is also presented.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.32 no.1
• /
• pp.40-47
• /
• 1987

Under the different conditions of planting density and compound fertilizer level, some agronomic and chemical characteristics of burley tobacco were investigated from 1982 to 1984. Leaf area and dry leaf weight per plant, crop growth rate, relative growth rate and net assimilation rate for 40-60 days after transplanting were higher with increasing plant spacing and fertilizer, but leaf area index was lower with increasing plant spacing. At topping stage, the leaf size was increased with increasing plant spacing and amount of fertilizer applied and the stem diameter was increased by increasing plant spacing. Leaf area, leaf weight per plant and weight per unit leaf area of harvested leaf were higher when plant spacing and fertilizer increased. It was estimated that the optimum plant spacing was 105cm x 34cm and level of com-pound fertilizer (N-P$_2$ O$\sub$5/ -K$_2$O =10-10-20) was 263kg/l0a for high yield. There were trends toward increase the contents of total alkaloid and total nitrogen with increasing plant spacing and fertilizer application. There was significant positive correlation between plant spacing and total nitrogen, and between fertilizer application and total nitrogen. The plant spacing of 105cm x 35 to 40cm and 227.5kg/l0a of fertilizer level may be profitable for farm economy and the low nitrogenous leaf.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.26 no.2
• /
• pp.13-24
• /
• 2023

Sewage sludge has been widely used as an organic fertilizer in agriculture. However, sewage sludge can cause serious malodor problems resulting from the decomposition of organic compounds in anaerobic conditions. The malodor of sewage sludge mainly occurs due to a low carbon to nitrogen ratio (C/N), high moisture, and low temperature, which are ideal conditions for ammonia emissions. Therefore, in this study, we investigated the reduction of the odor-causing ammonia nitrogen (NH₃-N) in sewage sludge by co-application of microbes and methanol (MeOH). The physico-chemical properties of the municipal sewage sludge showed that the odor was mainly caused by a higher NH₃-N content (2932.2 mg L^-1). Supplementation with MeOH (20%) as a carbon source in the sewage sludge significantly reduced the NH₃-N up to 34.2% by increasing C/N ratio. Furthermore, the sewage sludge was treated with the NH₃-N reducing and plant growth promoting (PGP) bacteria Stenotrophomonas rhizophila SRCM 116907. The treatment with S. rhizophila SRCM 116907 significantly increased the seedling vigor index of Lolium perenne (10.3%) and Chrysanthemum burbankii (42.4%). The findings demonstrate that supplementing sewage sludge with methanol significantly reduces ammonia emissions, thereby mitigating malodor problems. Overall, the study highlights the potential of using a microbial and methanol approach to improve the quality of sewage sludge as an organic fertilizer and promote sustainable agriculture.

• Korean journal of applied entomology
• /
• v.62 no.4
• /
• pp.267-275
• /
• 2023

Botanical extracts are employed in management of aphids. Extracts from Tanacetum cineariaiaefolium, Derris elliptica, and Sophora flavescens are widely used to control various insects. In this study, we determined concentrations of insecticidal active ingredients in commercial botanical extracts of these plants, and we investigated the time and concentration for lethal results with the green peach aphid, Myzus persicae. The concentrations of active ingredients, pyrethrins from T. cineariaiaefolium, rotenone from D. elliptica, and matrine and oxymatrine from S. flavescens, were determined after their fractionation by liquid chromatography followed by mass analysis and comparison with standard compounds. The extracts were tested for lethality in a bioassay with green peach aphids. Sprays at defined doses were applied to tobacco leaves infested with aphid nymphs. The lethal concentrations (LC50) were 20.4 ppm for pyrethrins, 34.1 ppm for rotenone, and 29.6 ppm for matrine at 48 h after treatments. At 100 ppm application levels, the lethal time LT50 was 13.4 h for pyrethrin, 15.1 h for rotenone, and 14.4 h for matrine. Kaplan-Meier analysis indicated the lethal times for the three botanical extracts at 100 ppm were significantly faster than application of a chemical insecticide, Sulfoxaflor, applied at the recommended level. These results provide baselines to develop and formulate single or mixed preparations containing botanical extracts to control green peach aphids on commercial crops.

• Journal of Life Science
• /
• v.34 no.4
• /
• pp.215-226
• /
• 2024

Aralia continentalis is widely distributed in Far East Asian countries such as Korea, China, and Japan. A. continentalis has traditionally been used as an herbal remedy for various conditions, including analgesia, headache, inflammation, lameness, lumbago, rheumatism, and dental diseases in Korea. Previously, epi-continentalic acid, continentalic acid, and kaurenoic acid as major active biological compounds belonging to the diterpenoid class were identified. To synthesize diterpenoid derivatives with enhanced bioavailability, Fusarium fujikuroi was employed to biotransform diterpenoids due to its known antibacterial activity. This yielded two derivatives of kaurenoic acid, namely 16α-hydroxyent-kauran-2-on-19-oic acid and 2β, 16α-dihydroxy-ent-kauran-19-oic acid, with their chemical structures elucidated via NMR analysis. These derivatives exhibited increased polarity compared to kaur- enoic acid, as evidenced by their retention time on preparative HPLC using the ODS-A column and structural modifications. Evaluation of their antidiabetic activity targeting PTP1B, a negative regulator of the insulin signaling pathway, revealed inhibitory activities of 30.8% and 27.6%, respectively, at a concentration of 4 ㎍/ml. Additionally, both derivatives demonstrated low cytotoxicity, with an IC50 value 18 times higher than kaurenoic acid. Therefore, the augmented water solubility and reduced toxicity of 16α-hydroxy-ent-kauran-2-on-19-oic acid and 2β, 16α-dihydroxy-ent-kauran-19-oic acid, resulting from biotransformation by F. fujikuroi, render them promising candidates for industrial applications.