• Journal of Engineering Education Research
• /
• v.14 no.6
• /
• pp.41-47
• /
• 2011

Professional communication skills in writing and speaking with multiple and complex audiences are required to engineers in society of modern technology. In this paper, we proposed the effective assessment system for the Program Outcomes on the communication skill competence(PO7), which is one of the 12 program outcomes stipulated by ABEEK (Accreditation Board for Engineering Education of Korea). To ensure logical connectivity of the assessment system, we carefully selected the performance criteria by defining the core concept of "written communication" and "verbal communication". Based on the selected performance criteria, the whole process of creating assessment tools and rubrics was explained in detail. It can be expected that the assessment for the Program Outcomes on the communication skill competence would be more systematic by using the proposed assessment system.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.308-309
• /
• 2016

Reducing surface recombination is a critical factor for high efficiency silicon solar cells. The passivation process is for reducing dangling bonds which are carrier. Tunnel oxide layer is one of main issues to achieve a good passivation between silicon wafer and emitter layer. Many research use wet-chemical oxidation or thermally grown which the highest conversion efficiencies have been reported so far. In this study, we deposit ultra-thin tunnel oxide layer by PECVD (Plasma Enhanced Chemical Vapor Deposition) using $N_2O$ plasma. Both side deposit tunnel oxide layer in different RF-power and phosphorus doped a-Si:H layer. After deposit, samples are annealed at $850^{\circ}C$ for 1 hour in $N_2$ gas atmosphere. After annealing, samples are measured lifetime and implied Voc (iVoc) by QSSPC (Quasi-Steady-State Photo Conductance). After measure, samples are annealed at $400^{\circ}C$ for 30 minute in $Ar/H_2$ gas atmosphere and then measure again lifetime and implied VOC. The lifetime is increase after all process also implied VOC. The highest results are lifetime $762{\mu}s$, implied Voc 733 mV at RF-power 200 W. The results of C-V measurement shows that Dit is increase when RF-power increase. Using this optimized tunnel oxide layer is attributed to increase iVoc. As a consequence, the cell efficiency is increased such as tunnel mechanism based solar cell application.

• ETRI Journal
• /
• v.43 no.5
• /
• pp.909-915
• /
• 2021

GaAs on Si grown via metalorganic chemical vapor deposition is demonstrated using various Si substrate thicknesses and three types of dislocation filter layers (DFLs). The bowing was used to measure wafer-scale characteristics. The surface morphology and electron channeling contrast imaging (ECCI) were used to analyze the material quality of GaAs films. Only 3-㎛ bowing was observed using the 725-㎛-thick Si substrate. The bowing shows similar levels among the samples with DFLs, indicating that the Si substrate thickness mostly determines the bowing. According to the surface morphology and ECCI results, the compressive strained indium gallium arsenide/GaAs DFLs show an atomically flat surface with a root mean square value of 1.288 nm and minimum threading dislocation density (TDD) value of 2.4×10⁷ cm^-2. For lattice-matched DFLs, the indium gallium phosphide/GaAs DFLs are more effective in reducing the TDD than aluminum gallium arsenide/GaAs DFLs. Finally, we found that the strained DFLs can block propagate TDD effectively. The strained DFLs on the 725-㎛-thick Si substrate can be used for the large-scale integration of GaAs on Si with less bowing and low TDD.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.406-406
• /
• 2016

To get high efficiency n-type crystalline silicon solar cells, passivation is one of the key factor. Tunnel oxide (SiO2) reduce surface recombination as a passivation layer and it does not constrict the majority carrier flow. In this work, the passivation quality enhanced by different chemical solution such as HNO3, H2SO4:H2O2 and DI-water to make thin tunnel oxide layer on n-type crystalline silicon wafer and changes of characteristics by subsequent annealing process and firing process after phosphorus doped amorphous silicon (a-Si:H) deposition. The tunneling of carrier through oxide layer is checked through I-V measurement when the voltage is from -1 V to 1 V and interface state density also be calculated about $1{\times}1012cm-2eV-1$ using MIS (Metal-Insulator-Semiconductor) structure . Tunnel oxide produced by 68 wt% HNO3 for 5 min on $100^{\circ}C$, H2SO4:H2O2 for 5 min on $100^{\circ}C$ and DI-water for 60 min on $95^{\circ}C$. The oxide layer is measured thickness about 1.4~2.2 nm by spectral ellipsometry (SE) and properties as passivation layer by QSSPC (Quasi-Steady-state Photo Conductance). Tunnel oxide layer is capped with phosphorus doped amorphous silicon on both sides and additional annealing process improve lifetime from $3.25{\mu}s$ to $397{\mu}s$ and implied Voc from 544 mV to 690 mV after P-doped a-Si deposition, respectively. It will be expected that amorphous silicon is changed to poly silicon phase. Furthermore, lifetime and implied Voc were recovered by forming gas annealing (FGA) after firing process from $192{\mu}s$ to $786{\mu}s$. It is shown that the tunnel oxide layer is thermally stable.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.26 no.3
• /
• pp.293-300
• /
• 2016

Objectives: This study is designed to survey the current status of trade secrets in GHS MSDS circulated in workplaces and indicate problems in the chemical information system. According to the survey results, we suggest management plans including political improvement of the trade secret system for MSDS and technical support to workplaces following enhanced chemical communication. Methods: To review this subject, we selected 153 manufacturers and six importers working in such fields as organic chemical production. We then investigated the retention status of GHS MSDS, application of trade secrets, and the content of trade secret components in MSDSs for mixtures. Results and Conclusions: Within the results, the content of trade secret ingredients was 67.4% (single: 9.0%, mixture: 75.6%). This is an increase compared with the previous results of 45.5% in 2011. Among 59,393 GHS MSDSs, 74.5% had ingredients less than 10% trade secret components, 19.1% had 10-30%, 1.8% had 30-50%, and 4.6% had more than 50%. To settle this issue, we recommend registration or evaluation of trade secrets as implemented in advanced countries. Also, business should be required to undergo regular evaluations of application status for trade secrets in workplace GHS MSDS.

• Elastomers and Composites
• /
• v.50 no.2
• /
• pp.103-109
• /
• 2015

In this study, epoxy/anhydride mixing ratio for the highly silica filled compounds with chromium (III) octoate catalyst was investigated at a low curing temperature ($71^{\circ}C$ for 40 hr) by evaluating the compressive strength with the weight ratio ranges from 0.3/1.0 to 1.0/1.0 of epoxy part (Part A)/anhydride part (Part B). In case of epoxy/anhydride compounds used surface unmodified silica by coupling agent, these compounds need excess anhydride unlike the weight ratio in the conventional epoxy/anhydride compounds. In curing behavior, the epoxy/anhydride compounds containing chromium (III) octoate showed high conversions at $71^{\circ}C$ for 40 hr, even if a dipropylene glycol (DPG) was not used as a polymerization initiator. Also, DPG leads to a poor epoxy network structure. In conclusion, the appropriate weight ratio of Part A/Part B of highly silica filled epoxy/anhydride compounds with chromium (III) octoate catalyst is 0.5/1.0 and the maximum amounts of silica is 1470 phr of epoxy resin.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.5
• /
• pp.1125-1131
• /
• 2012

According to abrupt decrese in number of farmer and ageing society, there has been a need for development of low cost agricultural robot. In this paper, a H/W and S/W platform of caterpillar type agricultural chemical dusting robot based on XP embedded system were described. The developed agricultural robot has 2 d.o.f caterpillar type driving wheel and 2 d.o.f chemical dusting spray mechanical system. The H/W platform of the agricultural robot consists of robot controller, remote controller and sensor controller. In S/W platform, 5 processes work concurrently, which are task manager, TCP-IP communication process, localization process, wheel control, and sensor control process. This robot platform has been developed for chemical dusting robot. We proved this system's validity through field test.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.28 no.1
• /
• pp.91-99
• /
• 2018

Objectives: From a policy perspective, the introduction of confidential information reviews is a vital task for expanding workers' right to know and improving hazardous materials information communication. In this study, rational methods for introducing and administering confidential information reviews were examined as a part of advancing chemical information communication. Methods: The domestic status, social demands, and control cases from other countries about confidential information in material safety data sheets(MSDSs) were all examined. Additionally, principles for introducing MSDS confidential information review, what needs to be revised prior to its introduction, and procedures and manners of reviewing confidential information were suggested. Results and Conclusions: When composition information on MSDS needs to be protected in the EU and Canada, confidential information should be claimed and then approved by competent authorities with a principle of reviewing confidential information prior to rescinding information from MSDS. Applying the same principle, certain information on an MSDS that needs to be protected should be reviewed and approved in Korea. As a result, the MSDS is communicated with approval numbers replacing composition information. MSDS confidential information review has five steps, including deciding whether chemicals claimed to be confidential are excluded from applying for a confidentiality exemption, the names and concentration ranges of ingredients are adequate, and the claimed information is valid in terms of confidentiality.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.6
• /
• pp.77-82
• /
• 2021

There are three types of urinalysis: physical test, chemical test, and microscopic test. Among these, the chemical urinalysis is an easily accessible method of the general public to compare the chemical reaction of urinalysis strip with a standard colorimetric table by sight or purchase the portable urinalysis machine separately. Currently, with the popularization of smartphone, research on the urinalysis service using smartphone is increasing. The urinalysis screening application is one of the urinalysis services using a smartphone. However, the RGB values of the urinalysis pad taken by the urinalysis screening application have large deviations due to the effect of lighting. Deviation of RGB value debases the accuracy of urinalysis discrimination. Therefore, in this paper, the accuracy of urinaylsis pad image discrimination is improved through CNN after classifying urinalysis strips taken by the urinalysis screening application based on smartphone by urinalysis pad items. Urinalysis strip was taken from various backgrounds to generate CNN image, and urinalysis discrimination was analyzed using the ResNet-50 CNN model.

• Proceedings of the KIEE Conference
• /
• 2004.07c
• /
• pp.1737-1739
• /
• 2004

Diamond-like carbon (DLC) films were prepared with RF-PECVD (Plasma Enhanced Chemical Vapor Deposition) method on coming glass and silicon substrates using methane ($CH_4$) and hydrogen ($H_2$) gases. We examined the effects of $CH_4$ to $H_2$ ratios on tribological and optical properties of the DLC films. The structure and surface morphology of the films were examined using Raman spectroscopy and atomic force microscopy (AFM). The hardness of the DLC film was measured with nano-indentor. The optical properties of DLC thin film were investigated by UV/VIS spectrometer and ellipsometry. And also, solar cells were fabricated using DLC as antireflection coating before and after coating DLC on silicon substrate and compared the efficiency.