• Journal of Korean Society of Steel Construction
• /
• v.13 no.2
• /
• pp.115-122
• /
• 2001

Even in today's computer-oriented world with all its sophisticated analysis tools, engineering judgement is required to assess the adequacy of computer output. Approximate analysis method can be a feasible tool to check solutions from computer softwares roughly. It can be a simple tool for structural engineer to check force distribution in frame. Also, it can serve as a basis in selecting preliminary member sizes. The objective of this study is length factor and inflection points. The validity of this method is examined by comparing the results of this method with those of existing methods, showing improvement in the prediction of structural behavior.

• The Mathematical Education
• /
• v.50 no.4
• /
• pp.489-505
• /
• 2011

This study is an analysis on the focus of textbooks regarding the statistical chapters of "measures of representative(central tendency) and of the spread". Applying the summary-concept criteria of Juhyeon Nam(2007), 4 kinds of aspect of the chapter; (1) definition and its teleological validity of the measures of representative, (2) definition and practical value of the measures of spread (3) distributional form on the measures of representative and of spread (4) location and scale preservation or invariance of the measures of representative and of spread were observed. On the measures of representative, some definitions were insufficient to check the teleological validity of the measure. Most definitions of the measure of spread were based on the practical view points but no preparation for the future statistical inferences were found even by implication. Some books mention about the measures of representative and of spread for distributions, but we could not find any comments on the correspondence between the sample mean and the expectation of a distribution or population mean. However it is stimulant that some books check the validity of corresponding measures with the location and scale preservation or invariant property, that were not found in the previous curriculum.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.13 no.2
• /
• pp.237-244
• /
• 1995

In this study, we made WGS84 geoidal height model from GPS measurements for bench marks and calculated geoidal height of B.Ms which were selected check points using the hi-linear, trend surface fitting and triangulation interpolation method. From these, the interpolation accuracy was studied. Also, we tried to study accuracy of height transformation by making up orthometric height with latitude and longitude on Bessel ellipsoid for bench marks which were calculated by applying transformation parameters that were got GPS measurements for precise primary control stations. As a result of this study, the WGS84 geoidal height and orthometric height could be determined as a deviation value of 20 cm.

• Journal of Pharmacopuncture
• /
• v.11 no.4
• /
• pp.79-86
• /
• 2008

Objectives The purpose of this study is to report the effect of Hominis Placenta Pharmacopuncture(HPP) for patients with asthma. Methods We treated three patients who have asthma with HPP. To check the effect of HPP we used CAMSOM-V. To check the satisfaction of HPP we used Five-point Likert scale. Results After treatment symptoms were improved. CAMSOM-V decreased in all cases. The Likert scale points were checked 5 and 4 and 4. Conclusions In this study, we have found the meaning of the research that HPP, in the future will be efficacious against asthma.

• Journal of the Korean Wood Science and Technology
• /
• v.22 no.2
• /
• pp.61-70
• /
• 1994

This study was executed to find the applicability of press drying of tree disk by investigating the shrinkage and drying defect and to form appropriate model by comparing the actual moisture content(MC) and internal temperature in respect of drying time with calculated values based computer simulation to which was applied finite difference method. In press drying disk, heating period, constant drying rate period maintained plateau temperature at 100$^{\circ}C$ and falling drying rate period were significantly distinguished. Actual MC and internal temperature were analogous to those calculated at comparing points. Heat transfer model formed by Fourier's law using specific heat of moist wood and conduction coefficient considering fractional volume of each element of wood cell wall, bound water, free water and air showed applicability as basic data to developing heat expansion, shrinkage and drying stress during press drying. Also mass transfer model formed by Fick's diffusion law using water vapor diffusion coefficient showed applicability. Longitudinal shrinkage was developed by pressure of hot press and tangential shrinkage was restrained by hygrothermal recovery. The heart check, surface check and ring failure were occurred differently in species, but V-shaped crack didn't develop.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.23 no.3
• /
• pp.273-282
• /
• 2005

A rapidly developed satellite technology is used in comprehensive fields such as spatial data aquisition and applications. Especially a GPS positioning is expected to reinvigorate at the national reference system changes to ITRF (International Terrain Reference Frame). Currently the National Geographic Information Institute (NGII) issues a triangulation point coordinate by separating old and new coordinates and in the year of 2007 it will be scheduled to be changed ITRF. The triangulation point coordinate in Cheju area causes some problems due to the difference original observation and re-observation. Thus in this study a GPS observation is conducted after re-organizing geodetic network based on 1st and 2nd order triangulation in order to check the current triangulation points in Cheju area. After the GPS observation data analysis, stable points were extracted, proposed a geodetic network and its application.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.6_1
• /
• pp.511-518
• /
• 2012

It is well-known that non-metric digital cameras have to be calibrated for the close-range photogrammetry. But, the self-calibration is still not an easy task because it requires rather a large calibration site of accurate control points, multiple image acquisitions in different positions, and accurate image point measurements that are quite labor-intensive and time-consuming. Based on the premise, this study carried out check point accuracy analysis from self-calibration of different control point designs and photo combinations. The test results showed that the calibration using three photos covering three-dimensional control points produced high accuracy, but control points on a plane could attain the comparable accuracy with four photos including a 90-degree rotated photo. We then compared the target accuracy of on-site self-calibration using flat control points to that of laboratory-self calibration and observed comparable results.

• Journal of the Korean Society of Food Culture
• /
• v.36 no.2
• /
• pp.184-197
• /
• 2021

This study investigated the recognition and utilization status of food labeling and nutrition labeling, according to the body type recognition of university students. In a total of 351 subjects, the male subjects comprised of 25.8% belonging to the underweight awareness group, 46.3% normal weight awareness group, and 27.9% overweight awareness students. Among the female students, 29.2% belonged to the underweight awareness group, 36.6% were normal body weight, and 34.2% were the overweight group. When purchasing processed foods, the price (4.05 points), expiration date (4.03 points), and gross weight (3.88 points) were the most considered factors of the food labeling content (5 points) for all body shape recognition groups. The food labeling of canned foods was checked most by the underweight awareness group (p<0.05). For bread and snacks, the contents of food labeling were confirmed most by the normal weight awareness group and the overweight awareness group (p<0.001). For beverages, the normal weight awareness group checked more food labels (p<0.01). The underweight awareness group (55.2%) hardly checked the nutritional labeling, and 22.9% of these subjects did not check at all. Our results may provide the necessity to improve the incorrect eating habits of students, by evaluating differences between the cognitive body type and the actual body type by BMI.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.37 no.6
• /
• pp.525-533
• /
• 2019

There are two feature collection methods in digital mapping using the UAV (Unmanned Aerial Vehicle) Photogrammetry: vectorization and stereo plotting. In vectorization, planar information is extracted from orthomosaics and elevation value obtained from a DSM (Digital Surface Model) or a DEM (Digital Elevation Model). However, the exact determination of the positional accuracy of 3D features such as ground facilities and buildings is very ambiguous, because the accuracy of vectorizing results has been mainly analyzed using only check points placed on the ground. Thus, this study aims to review the possibility of 3D spatial information acquisition and digital map production of vectorization by analyzing the corner point coordinates of different layers as well as check points. To this end, images were taken by a Phantom 4 (DJI) with 3.6 cm of GSD (Ground Sample Distance) at altitude of 90 m. The outcomes indicate that the horizontal RMSE (Root Mean Square Error) of vectorization method is 0.045 cm, which was calculated from residuals at check point compared with those of the field survey results. It is therefore possible to produce a digital topographic (plane) map of 1:1,000 scale using ortho images. On the other hand, the three-dimensional accuracy of vectorization was 0.068~0.162 m in horizontal and 0.090~1.840 m in vertical RMSE. It is thus difficult to obtain 3D spatial information and 1:1,000 digital map production by using vectorization due to a large error in elevation.

• Journal of Food Hygiene and Safety
• /
• v.19 no.2
• /
• pp.84-96
• /
• 2004

This study aims at developing an easily-applicable Sanitation Standard Operating Procedure(SSOP) program for Fresh raw-fish manufacturing. It compares the sanitation inspection results of SSOP-program-applied procedure and non-applied procedure. The samplings for bacteriological examination were collected from the touching surface of food and from the personal workers. The sanitation status was recorded in the check-up list. The results were statistically analyzed to ascertain the efficiency of the SSOP program. The present official KFDA check-up list for sanitation inspection is composed of 51 items. Each item is judged to be fit or unfit to the standards. When the unfit items are more than 6, the work-place is judged to be insanitary. But in this study, the results of sanitation inspection are scaled in points in the 70％ allotment, and the results of bacteriological examination are scaled in points in 30％, totaling 100％. Below 60 scores are judged to be insanitary and administratively punished; 61-75 scores are judged to be average; 76-85 good; above 86 excellent. The sanitation inspection scores by the improved check-up list went up by two grades from 71.8 (before SSOP program) to 88.6 (after SSOP program). The results of bacteriological examination also improved from 57.5 to 98.2. The total scores of both results converted in the allotment of 70％ and 30％ also showed an improvement by two grades from 66.4 (before SSOP program) to 93.4 (after SSOP program). The above results show that the manufacturers participated in this study are following the 8 essential sanitary procedures which are needed to anchor the HACCP system.