• Fire Science and Engineering
• /
• v.22 no.3
• /
• pp.293-299
• /
• 2008

From January, 2004 to July, 2007, 97 patients were diagnosed with Acute coronary syndrome(ACS) in Emergency Medical Center in Jecheon City in Korea. Among 97 patients, the prehospital assessment rates were as follows ; blood pressure check(27.80%, pulse rate check(33.0%), respiration check(23.7%). In hospital emergency care, oxygen supply was 52.6%, absolute bed rest was 12.4%, electrocardiogram(EKG) check was 4.1%, and nitroglycerin and intravenous fluid therapy was 0%. Therefore, ACS patients have not received sufficient prehospital cares till now. In order to improve the proficiency of the first aid emergency medical technicians(EMTs), it is necessary to provide the continuing On-the-job training(OJT) programs for prehospital emergency care.

• Journal of Korean Academy of Nursing
• /
• v.36 no.7
• /
• pp.1154-1163
• /
• 2006

Purpose: This study was to monitor the effects of forming desirable eating and exercise habits and change the blood lipid levels by developing and applying E-Mail educational programs for a hyperlipidemia health check-up. Method: The research design used a nonequivalent control group pre-post test. Ninety-nine subjects (Exp.=50, Cont.=49) were selected randomly and the male subjects agreed to a hyperlipidemia health check-up at a comprehensive medical screening center. This study verified validity and reliability through factor analysis on a life habit measurement tool. The data was analyzed with SPSS win 12.0 using an $X^2-test$, t-test, ANOVA and ANCOVA. Result: Eatingand exercise habit scores of the experimental group which were educated through E-Mails changed considerably more than that of the control group which was not educated. Total-cholesterol and LDL-cholesterol in the experimental group was considerably lower than that in the control group, but HDL-cholesterol increased considerably Triglycerides, however, didn't show change. Conclusion: An E-Mail educational program may be applied as a hyperlipldemia health check-up nursing intervention strategy.

• The Journal of Korea Assosiation for Disability and Oral Health
• /
• v.13 no.2
• /
• pp.73-79
• /
• 2017

The purpose of this study was to analyze the dental treatment of patients with disabilities, especially according to the frequency of general anesthesia, and to propose the improvements in oral care. The subjects of the present study were 85 patients including age, sex, medical condition, dental treatment and the number of general anesthesia. The patients were divided into regular and irregular check groups according to their follow-up patterns. These two groups were compared for the frequency of general anesthesia and the type of repeated treatment. The results showed that restorative treatment was superior in numbers under first visit of general anesthesia. And more general anesthesia was performed in the irregular recall check group compared with the regular recall check group. This survey suggest that easy access to a dental clinic and the convenience of treatment is needed. On the other hand, there is a time limit on the dental care for disabilities by the dentist. Therefore oral care training program should be simultaneously provided for parents to improve the efficiency of dental care at home. In conclusion, efforts should be made for more comprehensive and effective dental care including regular recall check and preventive home care for disabilities.

• Molecules and Cells
• /
• v.38 no.6
• /
• pp.540-547
• /
• 2015

Attention deficit/hyperactivity disorder (ADHD) is one of the most common neurodevelopmental disorders, affecting approximately 5% of children. However, the neural mechanisms underlying its development and treatment are yet to be elucidated. In this study, we report that an ADHD mouse model, which harbors a deletion in the Git1 locus, exhibits severe astrocytosis in the globus pallidus (GP) and thalamic reticular nucleus (TRN), which send modulatory GABAergic inputs to the thalamus. A moderate level of astrocytosis was displayed in other regions of the basal ganglia pathway, including the ventrobasal thalamus and cortex, but not in other brain regions, such as the caudate putamen, basolateral amygdala, and hippocampal CA1. This basal ganglia circuit-selective astrocytosis was detected in both in adult (2-3 months old) and juvenile (4 weeks old) $Git1^{\check{s}/\check{s}}$ mice, suggesting a developmental origin. Astrocytes play an active role in the developing synaptic circuit; therefore, we performed an immunohistochemical analysis of synaptic markers. We detected increased and decreased levels of GABA and parvalbumin (PV), respectively, in the GP. This suggests that astrocytosis may alter synaptic transmission in the basal ganglia. Intriguingly, increased GABA expression colocalized with the astrocyte marker, GFAP, indicative of an astrocytic origin. Collectively, these results suggest that defects in basal ganglia circuitry, leading to impaired inhibitory modulation of the thalamus, are neural correlates for the ADHD-associated behavioral manifestations in $Git1^{\check{s}/\check{s}}$ mice.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.12 no.3
• /
• pp.331-340
• /
• 2012

In the deep sub-micron ICs, growing amounts of on-die memory and scaling effects make embedded memories increasingly vulnerable to reliability and yield problems. Spare columns are often included in memories to repair defective cells or bit lines during production test. In many cases, the repair process will not use all spare columns. Schemes have been proposed to exploit these unused spare columns to store additional check bits which can be used to reduce the miscorrection probability for triple errors in single error correction-double error detection (SEC-DED). These additional check bits increase the dimensions of the parity check matrix (H-matrix) requiring extra area overhead. A method is proposed in this paper to efficiently fill the extra rows of the H-matrix on the basis of similarity of logic between the other rows. Optimization of the whole H-matrix is accomplished through logic sharing within a feasible operating time resulting in reduced area overhead. A detailed implementation using fuse technology is also proposed in this paper.

• Journal of Acupuncture Research
• /
• v.15 no.2
• /
• pp.455-478
• /
• 1998

The result as following one was founded that investigate cause and acupuncture point for symptoms of headache; 1. Headache in distinction from doo-pung(頭風.) was defined that it' period is short and treatment is easy. 2. The cause of headache was classified according to the interior and exterior cause of the body. 3. Total number of used acupuncture point was one hundred and six, and in order of using time acupuncture point was appeared as LI4(15), LU7(12), GB20(12), BL2(11), GV20(9), TE23(9), SI3(7), GV24(7), GV23(7) 4. The meridian distribution of acupuncture point is appeared as Bladder Meridian(21points), Gallbladder Meridian(18points), Governer vesseI(14points), Triple Energizer meridian(12points), Large Intestine Meridian(9points), Small Intestine Meridian(7points), Stomach Meridian(7points) 5. According to headache position, the distribution of acupuncture point $Yangmy\check{o}ng\;Ky\check{o}ng$ and Governer vessel was used to frontal headache, Soyang $Ky\check{o}ng$ to migraine, Taeyang $Ky\check{o}ng$ and Governer vessel to occipital headache. 6. LI4(合谷) and LU7(列缺) was used to general headache as basic acupuncture point.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.9
• /
• pp.720-727
• /
• 2008

Microfluidic single chip integrating thermopneumatic micropump and micro check valve are developed. The micropump and micorvalve are made of biocompatible materials, glass and PDMS, so as to be applicable to the biochip. By using the passive-type check valve, backward flow and fluid leakage are blocked and flow control is stable and precise. The chip is composed of three PDMS layers and a glass substrate. In the chip, flow channel and pump chamber were made on the PDMS layers by the replica molding technique and pump heater was made on the glass substrate by Cr/Au deposition. Diameter of the pump chamber is 7 mm and the width and depth of the channel are 200 and $180{\mu}m$, respectively. The PDMS layers chip and the heater deposited glass chip are combined by a jig and a clamp for pumping operation, and they are separable so that PDMS chip is used as a disposable but the heater chip is able to be used repeatedly. Pumping performance was simulated by CFD software and investigated experimentally. The performance was the best when the duty ratio of the applied voltage to the heater was 33%.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.10 no.1
• /
• pp.13-23
• /
• 2015

Recently, a few image-processing based mobile urine testers have actively been studied since the urine-analysis result can be available to the user in real time immediately after the test is done. However, the accuracy of test result can be severely degraded due to variable illumination environments and a variety of manners to capture the image with a camera embedded in the smartphone according to different users. This paper proposes the Check4Urine system, a novel smartphone-based portable urine-analysis tester and provides three techniques to improve such a performance degradation problem robust to various test environments and disturbances, which are the compensation algorithm to correct the varying illumination effect, an urine strip detection algorithm robust to edge loss of the object image, and the color decision algorithm based on the pre-processed reference table. Experimental results show that the proposed Check4Urine system increases the accuracy of urine-analysis by 20-50% at various test conditions, compared with the existing image-processing based mobile urine tester.

• Industry Promotion Research
• /
• v.2 no.1
• /
• pp.9-13
• /
• 2017

This study deals with the check valve safety valve for residential gas piping. It can be manually shut off within 1 second in case of emergency, and it is possible to touch 3kg of pressure by hand force. To develop the technology so that it can be used repeatedly. Study results after first valve operation. And 0.61 seconds on average. Therefore, it was found that there was no problem in operation even when used as a safety valve. Third, it was found that all of the results of using the blocking ball diameter of 7mm were not abnormal. In this study, it is meaningful to develop the check valve safety valve of gas piping and verify the performance by testing with existing valve.

• Journal of Power System Engineering
• /
• v.19 no.3
• /
• pp.69-74
• /
• 2015

Check valves used in vessels include shock-release function on piping system, aside from basic back flow prevention. However, proper and enough protection of system is not obtainable due to use of high-pressure and bulk fluids, resulting from enlargement of vessels. In this study, casting analysis of check valves protecting systems in flow path from water hammering or back flow is conducted, using Z-CAST program. Also, molten metal filling, flow analysis, solidification analysis and shrinkage cavity analysis are conducted. The main results are as following. Regarding filling of each risering, molten metal showed stable supply condition without being isolated. It was identified that the final solidification exists on risering, but shrinkage cavity possibly might happens at the point of isolation solidification.