• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.666-669
• /
• 2008

Droplet in miniaturized microfluidic systems have received much focused attention recently. In this work, electrical charging phenomenon of a conducting water droplet on the electrode under the dc electric field is studied and using this phenomenon droplet actuation method for microreactor applications is experimentally demonstrated. To find effects of key factors, the effects of electric field, medium viscosity, and droplet size are investigated. A scaling law of charging for the conducting droplet is derived from the experimental results. Unlike the case of a perfect conductor, the estimated amount of electrical charge ($Q_{est}$) of a water droplet is proportional to the 1.59 power of the droplet radius (R) and the 1.33 power of the electric field strength (E). (For a spherical perfect conductor, Q is proportional to R2 and E.) It is thought that the differences are mainly due to incomplete charging of a water droplet resulted from the combined effect of electrochemical reaction at electrode and the relatively low conductivity of water. Using this phenomenon, we demonstrate the transport of the charged droplet and fusion of two oppositely-charged droplets. When electric field is subjected sequentially on the electrode, the charged droplet is transported on the electrode. For the visualization of fusion of charged droplets, the precipitation reaction is used. When subjected to a DC voltage, two droplets charged are moving and merging toward each other due to the Coulombic force and chemical reaction is simultaneously occurred by coalescence of droplets. It may be due to the interchange effect of charge. It is shown that the droplet can be used for microreactor where transporting, merging etc. of reagents constitute unit operation.

• 시큐리티연구
• /
• 제2호
• /
• pp.83-98
• /
• 1999

The LPG station's explosion at Bucheon city was a major accident which with rare frequency of occurrence but large damage effect. Therefore, to prevent similar accident in the future from LPG chargings stations which located at inner urban area, it needs to identify the damage effects of such facilities by comparing theoretically quantities risks-PHAST. The BLEVE effects from the accident showed similar level in case of heat flux, however, the over pressure level reflected at reduced distance. The structure damage to the nearby area showed comparatively large reduction of concrete strength and shape changes through by heat effect while the overpressure effect was small.

• 경영정보학연구
• /
• 제23권3호
• /
• pp.177-200
• /
• 2021

최근 전자지갑, 디지털화폐, 선불포인트, 선불카드 같은 선불전자지급수단의 사용이 점차 증가하고 있다. 선불지급수단은 선 충전, 후 사용이라는 특성이 있다. 본 연구는 선불 충전이 필요한 서비스의 개선에 도움을 주고자, 선불전자지급수단의 온라인 충전 이용의도에 영향을 미치는 요인들에 대하여 기술수용모델을 변형하여 실증적으로 연구하였다. 선불전자지급수단의 온라인 충전 이용의도에 관련된 선행연구가 많지 않아 기존 간편결제와 전자화폐에 대한 연구들을 통해 요인 변수를 도출하였다. 선불 교통카드 사용자를 대상으로 조절효과를 중심으로 온라인 충전의 이용의도를 분석하였다. 연구 결과 독립변수 중에서 '편리성', '보편성', '자기효능감'은 매개변수인 '지각된 유용성'에 정(+)의 영향을 미치는 것으로 나타났다. '지각된 유용성'은 종속변수인 '이용의도'에 유의한 영향을 미치는 것으로 분석되었다. 사용자들의 성별, 인터넷 사용시간, 인터넷 쇼핑 구매빈도, 모바일충전 이용빈도, 교통카드 이용형태 등에 따라서 '지각된 유용성'과 '이용의도'에 조절효과가 유의미하게 나타났다. 시사점으로 선불 서비스의 유용성을 높이는 방향으로 서비스에 대한 개선과 차별화된 마케팅의 필요성을 제안하였다. 다른 요인변수와 조절변수를 추가하여 전자지갑, 간편결제포인트, 디지털화폐 등의 서비스를 대상으로 향후 연구 방향을 제시하였다.

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2000년도 춘계학술대회 논문집
• /
• pp.217-218
• /
• 2000

유해입자 배출 저감을 위한 대기오염 제어장치로는 필터(filter), 관성장치(inertialdevices), 침전조(settling), 스크루버(scrubber), 전기집진기(ElectroStatic Precipitator, ESP)등이 있다. 이 중, 정전기력을 이용한 전기집진기는 대전과정과 집진과정이 동일한 곳에서 이루어지는 1단식(one-stage)과 독립적으로 이루어지는 2단식(two-stage)으로 분류되며, 2단식의 경우, 대전부(charging section)와 집진부(collecting section)는 몇 개의 대전셀(charging cell)과 집진셀(collecting cell)들로 구성되어져 있다. (중략)

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.1083-1087
• /
• 1996

Bore evacuator which have circular structure of cylindrical form is located at tube, and its function is to evacuate toxic gases generated during firing intervals. Between bore evacuator and bore interior, gas flow field is developed through the nozzles, and the charging and discharging process is formed. By these flow cycle(charging and discharging) the evacuation effect can be generated. This report contains an analyses and results consideration about bore evacuator flowfield.

• 대한기계학회논문집B
• /
• 제27권10호
• /
• pp.1427-1434
• /
• 2003

Turbo- or Super-charging has been used to boost engine power for Gasoline- and Diesel Engine since beginning of 20th century. So far turbo-charger has enjoyed a high reputation in the charging field for its technical advantages such as no demand of operation power from engine and an excellent charging effect in a static operation at mid- and high engine speed. A mechanically driven super-charger, however, is now popular due to the high engine power at quick change of the driving mode - high engine torque even at low engine speed. Since super-charger needs operation power from engine, it is difficult to improve its relatively higher fuel consumption than that of turbo-charger. This negative point is still an obstacle to the wide use of supercharger. Super-charger using screw-type compressor will fulfill the purpose to reduce fuel consumption by minimizing operation power owing to no charge at idling or part load driving condition. This study aims to develop power control concept to achieve the minimization of operation power. A screw type super-charger was modified in design partially and installed with an internal bypass valve and a bypass tube to control charging pressure at part load. The various control concepts show a possibility to reduce operation power of super-charger.

• 화약ㆍ발파
• /
• 제36권2호
• /
• pp.10-18
• /
• 2018

철골 구조물의 발파해체에 사용하는 성형폭약은 국내외 대부분의 경우에 사용이 제한적이거나 수급이 불가능하여 적용하지 못하는 경우가 많이 발생한다. 이러한 문제를 해결하기 위해서는 산업용 폭약을 사용하여 금속 제트가 발생할 수 있는 장치가 필요하다. 본 연구에서는 금속 제트가 발생하는 강재 절단용 장약용기를 제작하였다. 절단 성능 실험을 통해 두께 25mm의 강판에 대한 장약용기의 절단 성능을 평가하였다. 또한 침투 과정 수치 모사와 절단 성능 실험에서의 결과를 비교하고, 두께 35mm와 70mm의 강판에 대한 절단 성능을 평가하였다.

• 전기학회논문지P
• /
• 제58권1호
• /
• pp.20-26
• /
• 2009

In this paper, the switching mode conversion type pulse charger by fly-back converter method for lead battery of the solar cell generator equipment is proposed. And we propose the control circuit and design method of insulated switching mode convert type pulse charger by fly-back convert method in the lead battery. The proposed system can minimize the current consumption by digital pulse. Also the proposed system can generate the constant 10[KHz] frequency, transmit the signal with main control system in the power control system. And it supervises the state of lead battery using one chip micro processor. The proposed the switching mode conversion type pulse charger by the fly-back converter method can charge fast and stabilize lead battery with nominal value 12[V], 20[AH]. Also we propose the design procedure of the power control circuit for turn ratio of fly-back inductor and determining method of values such as the charging current, bulk current, partial current, over current value and fixed charging voltage. The experiment results for the voltage and current wave for partial, bulk, over and fixed charging period show the good charging effect and performance. And the PCB and internal coupling diagram of the switching mode conversion type pulse charger by fly-back converter method is presented.

• 화약ㆍ발파
• /
• 제38권2호
• /
• pp.13-21
• /
• 2020

철골 구조물의 발파해체에 사용하는 성형폭약은 국내외 사용이 제한적이거나 수급이 불가능한 경우가 많이 발생하며, 기존의 선형 성형폭약은 규모가 크고, 강재의 두께가 두꺼운 철골 구조물을 절단하기 위한 충분한 절단 성능을 확보하지 못하였다. 이러한 문제를 해결하기 위해 고폭속, 고압력의 산업용 폭약을 사용하여 금속제트를 발생시켜 절단 할 수 있는 장치가 필요하다. 본 연구에서는 철골 구조물의 발파해체에 적용하기 위해 3가지 타입의 장약용기를 제작하였다. 절단 성능 실험을 통해 다양한 두께의 H형 강재와 강판에 대한 절단 성능을 평가하였고, 실험결과 충분한 절단성능을 확인하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1400-1405
• /
• 2004

Experimental study is performed to investigate the effect of heat load and operating temperature on the thermal performance of a heat pipe with screen mesh wick. The heat pipe was designed in 200 screen meshes, 500mm length and 12.7mm O.D tube of copper, water as working fluid(4.8g) and nitrogen as non-condensible gas(NCG). The heat pipe used in this study has evaporator, condenser and adiabatic section, respectively. Experimental data of axial wall temperature distribution is presented for heat transport capacity, the temperature of cooling water of condenser, inclination angle, and operating temperature. For the results from this study, it is found that, for the same charging mass of working fluid, the initial operating temperature and the overall wall temperatures of heat pipe are higher for NCG charging mass of $5.0{\times}10^{-6}kg$ and $3.4{\times}10^{-6}kg$, than that of $1.0{\times}10^{-6}kg$.