DOI QR코드

DOI QR Code

An Evaluation of Cutting Performance for Cutting Structural Steel using Charging Container

장약용기를 이용한 강재 절단 성능 평가

  • Received : 2020.06.15
  • Accepted : 2020.06.23
  • Published : 2020.06.30

Abstract

The shaped charge was used in explosive demolition of a steel frame structure, but it was often not used because it was limited to use and impossible to supply at domestic and overseas. Existing linear shaped charge did not have sufficient cutting performance to cut steel frame structures with a huge scale and thick steel plate. To solve these problems, we produced a device that could generate metal jets using industrial explosives of high detonation velocity and pressure. In this study, we made a charging container of three types which applicable to explosive demolition of steel frame structures. The experiment of cutting performances was carried out to evaluate the effect of cutting of charging containers on the various thicknesses of the H-beam and steel plate. As a result of the experiment, sufficient cutting performance was confirmed.

철골 구조물의 발파해체에 사용하는 성형폭약은 국내외 사용이 제한적이거나 수급이 불가능한 경우가 많이 발생하며, 기존의 선형 성형폭약은 규모가 크고, 강재의 두께가 두꺼운 철골 구조물을 절단하기 위한 충분한 절단 성능을 확보하지 못하였다. 이러한 문제를 해결하기 위해 고폭속, 고압력의 산업용 폭약을 사용하여 금속제트를 발생시켜 절단 할 수 있는 장치가 필요하다. 본 연구에서는 철골 구조물의 발파해체에 적용하기 위해 3가지 타입의 장약용기를 제작하였다. 절단 성능 실험을 통해 다양한 두께의 H형 강재와 강판에 대한 절단 성능을 평가하였고, 실험결과 충분한 절단성능을 확인하였다.

Keywords

References

  1. 민경조, 박훈, 오세욱, 박세웅, 석철기, 조상호, 2018, 드로잉 가공 성형폭약용기의 강판절단성능에 관한 수치해석적 연구, 화약.발파(대한화약발파공학회지), Vol. 36, No. 3, pp. 19-28.
  2. 박훈, 민경조, 조상호, 석철기, 2018, 강재 절단을 위한 장약용기의 개발과 절단 성능 평가, 화약.발파(대한화약발파공학회지), Vol. 36, No. 2, pp. 10-18.
  3. 박훈, 석철기, 노유송, 2018, 강재 절단용 장약용기를 이용한 철골 교량 발파해체 시공사례, 화약.발파(대한화약발파공학회지), Vol. 36, No. 1, pp. 20-32.
  4. 박훈, 2019, 발파해체 설계 및 실무, 최신 화약.발파기술 및 응용발파 기술 실무 워크샵, 서울, pp. 69-95.
  5. 한화, 2016, 산업용화약 제품설명서, pp. 10.
  6. Vjecislav, B., M. Dobrilovic and V. Skrlec, 2014, The Efficiency of Linear Shaped Charges, Tehnicki vjesnik, Vol. 21, No. 3, pp. 525-531.