• 한국응용과학기술학회지
• /
• 제20권2호
• /
• pp.130-140
• /
• 2003

In order to improve the lithium ion battery's performance, the carbon nanofibers were introduced to the anode electrode fabricated with natural graphite particles. The influence of structural adjustment of the particles by the introduction method of carbon nanofibers and the content of carbon nanofibers on the electrical property and charge/discharge characteristics of the electrode were investigated. The electrode fabricated with the mixture of 10 wt% of carbon nanofibers grown separately and 90 wt% of graphite particles showed an excellent discharge capacity of 400 mAh/g and the improved cycle performance. The improved performance could be explained by that the carbon nanofibers shortened and uniformly distributed on the surface of graphite particles by ball milling increased the stability for the intercalation/deintercalation of lithium ion and increased the electrical conductivity due to the closed packing between graphite particles.

• Bulletin of the Korean Chemical Society
• /
• 제30권8호
• /
• pp.1733-1737
• /
• 2009

A new cathode material based on Li$Ni_{0.8}Co_{0.15}Al_{0.05}O_2$ (LNCA)/polyaniline (Pani) composite was prepared by in situ self-stabilized dispersion polymerization in the presence of LNCA. The materials were characterized by fourier transform infrared spectroscopy (FT-IR), ultraviolet-visible spectroscopy (UV-Vis), X-ray diffraction (XRD), and scanning electron microscopy (SEM). Electrochemical properties including galvanostatic charge-discharge ability, cyclic voltammetry (CV), capacity, cycling performance, and AC impedance were measured. The synthesized LNCA/Pani had a similar particle size to LNCA and exhibited good electrochemical properties at a high C rate. Pani (the emeraldine salt form) interacts with metal-oxide particles to generate good connectivity. This material shows good reversibility for Li insertion in discharge cycles when used as the electrode of lithium ion batteries. Therefore, the Pani coating is beneficial for stabilizing the structure and reducing the resistance of the LNCA. In particular, the LNCA/Pani material has advantageous electrochemical properties.

• 반도체디스플레이기술학회지
• /
• 제7권2호
• /
• pp.13-17
• /
• 2008

In this paper, in order to get the characteristics of the lithium secondary cell, such as charge and discharge characteristic, temperature characteristic, self-discharge characteristic and the capacity recovery rate etc, we build a thermal model that estimate the impedance of battery by experiment & simulation. In this one-dimensional model, Seven governing equations are made to solve seven variables c, $c_s,\;\Phi_1,\;\Phi_2,\;i_2$, j and T. The thermal model parameters used in this model have been adjusted according to the experimental data measured in the laboratory. The result(Voc, Impedance) of this research can be used in BMS(Battery Management System), so an efficient method of using battery is developed.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.384-385
• /
• 2006

Olivine $LiFePO_4$ cathode materials were synthesized by hydrothermal reaction, and coated by carbon black. The powders were characterized by the X-ray diffraction. $LiFePO_4$/Li cells were characterized electrochemically by charge/discharge experiments and ac impedance spectroscopy. The result showed the discharge capacity of $LiFePO_4$/Li cell was 133 mAh/g at the first cycle, and 128 mAh/g at the 30th cycle, respectively.

• 동력기계공학회지
• /
• 제18권6호
• /
• pp.146-152
• /
• 2014

Mg-Sn nanoparticles were prepared by an arc-discharge method in a mixture atmosphere of argon and hydrogen gases. Phases, morphologies, and microstructures of the nanoparticles were investigated by means of X-ray diffraction (XRD) and high-resolution transmission electron microscopy (HRTEM). It was found that the intermetallic compound of $Mg_2Sn$ was generated and coexisted with metallic phases of Mg and Sn within nanoparticles. Basedon the model cell, the electrochemical properties were also explored by discharge-charge cycling, cyclic voltammetry, and electrochemical impedance spectroscopy. The initial capacity of the first cycle reached 430 mAh/g. Two visible plateaus at 0.2-0.3 and 0.5-0.75V were observed in the potential profiles, which can attributed to alloying/de-alloying reactions between Li and Mg2Sn, respectively.

• 한국재료학회지
• /
• 제9권6호
• /
• pp.622-629
• /
• 1999

Effects of the fluorination in the $K_2$TiF\ulcorner solution and in-situ KF+ KOH electrolyte on the electrochemical charge-discharge properties of CaNi\ulcorner and the Mg-CaNi\ulcorner electrodes were investigated. In-situ fluorination in the KF+ KOH electrolyte compared with pre-fluorination in the$ K_2$TiF\ulcorner solution could improve the electrochemical cycling durability of CaNi\ulcorner and MG-CaN\ulcorner electrodes. The fluorinated layer on the alloy surface by pre-fluorination to improve the activity and anti-corrosion of the electrodes was dissolved in the pure KOH electrolyte during the cycling. The fluorinated layer was formed continuously on the surface of the electrode by thee2N KF addition in the 6N KOH electrolyte. The excess F\ulcorner ion addition in KOH electrolyte could improve the electrochemical cycling durability of CaNi\ulcorner and Mg-CaNi\ulcorner electrode. But, in case of MG-CaNi\ulcorner electrode, the discharge capacity of the electrode was reduced and the poor cycling property was shown with increasing of the MG process times.

• 한국수소및신에너지학회논문집
• /
• 제30권1호
• /
• pp.43-48
• /
• 2019

This study investigates the electrochemical characteristics of the hybrid cell that combined the advantageous characteristics of Li secondary battery and supercapacitor, high energy density and high power density, respectively. Electrochemical behaviors of the hybrid cell was characterized by charge/discharge, cycle and impedance tests. The hybrid cell using Li secondary battery and supercapacitor had better discharge capacity and cycle performance than that of using Li secondary battery only. Proper design of such a hybrid cell system is expected to result in substantial benefits to the well being of the Li secondary battery. The hybrid cell involving Li secondary battery for high energy density and supercapacitor for high power density may be the possible solution for future energy storage system.

• 한국표면공학회지
• /
• 제56권1호
• /
• pp.104-114
• /
• 2023

Three dimensional (3D) porous structures consisting of Cu@CoO core-shell-type nano-dendrites were synthesized and tested as the anode materials in lithium secondary batteries. For this purpose, first, the 3D porous films comprising Cu@Co core-shell-type nano-dendrites with various thicknesses were fabricated through the electrochemical co-deposition of Cu and Co. Then the Co shells were selectively anodized to form Co hydroxides, which was finally dehydrated to get Cu@CoO nanodendrites. The resulting electrodes exhibited very high reversible specific capacity almost 1.4~2.4 times the theoretical capacity of commercial graphite, and excellent capacity retention (~90%@50^th cycle) as compared with those of the existing transition metal oxides. From the analysis of the cumulative irreversible capacity and morphology change during charge/discharge cycling, it proved that the excellent capacity retention was attributed to the unique structural feature of our core-shell structure where only the thin CoO shell participates in the lithium storage. In addition, our electrodes showed a superb rate performance (70.5%@10.8 C-rate), most likely due to the open porous structure of 3D films, large surface area thanks to the dendritic structure, and fast electron transport through Cu core network.

• Korean Chemical Engineering Research
• /
• 제60권3호
• /
• pp.446-451
• /
• 2022

본 연구에서는 용량 및 장기 안정성을 개선하기 위하여 나노 실리콘 시트와 CNT를 정전기적 결합을 통해 피치가 코팅된 나노 실리콘 시트/CNT 복합체를 합성하였다. NaCl의 결정면에 스토버 법을 통해 제조된 나노 실리카 시트를 마그네슘 열 환원법을 사용하여 나노 실리콘 시트로 환원하였다. 산 처리를 통해 음으로 도전된 CNT와 APTES 표면처리를 통한 양으로 도전된 나노 실리콘 시트를 결합하여 나노 실리콘 시트/CNT 복합소재를 합성하였으며, 석유계 피치를 코팅하기 위하여 THF를 용매로 사용하였다. 제조된 음극복합소재의 물리적 특성은 FE-SEM, XRD, EDS를 통하여 분석하였고, LiPF₆ (EC:DMC:EMC = 1:1:1 vol%)를 전해액으로 사용하여 전지를 제조하였으며, 전기화학적 특성을 충·방전 사이클, 율속, differential capacity, EIS 테스트를 통해 조사하였다. 높은 조성의 실리콘과 전도성이 좋은 CNT를 사용할 경우 고용량 및 안정성이 우수한 음극소재를 제조할 수 있음을 알 수 있었다. 피치가 코팅된 나노 실리콘 시트/CNT 음극복합소재는 초기 방전 용량이 2344.9 mAh/g을 보였으며, 50 사이클 이후 용량 유지율이 81%로 피치가 코팅되지 않은 복합소재에 비해 개선된 전기화학적 성능을 확인할 수 있었다.

• 한국분말재료학회지
• /
• 제24권4호
• /
• pp.308-314
• /
• 2017

$Fe_3O_4$/Fe/graphene nanocomposite powder is synthesized by electrical wire explosion of Fe wire and dispersed graphene in deionized water at room temperature. The structural and electrochemical characteristics of the powder are characterized by the field-emission scanning electron microscopy, X-ray diffraction, Raman spectroscopy, field-emission transmission electron microscopy, cyclic voltammetry, and galvanometric discharge-charge method. For comparison, $Fe_3O_4$/Fe nanocomposites are fabricated under the same conditions. The $Fe_3O_4$/Fe nanocomposite particles, around 15-30 nm in size, are highly encapsulated in a graphene matrix. The $Fe_3O_4$/Fe/graphene nanocomposite powder exhibits a high initial charge specific capacity of 878 mA/g and a high capacity retention of 91% (798 mA/g) after 50 cycles. The good electrochemical performance of the $Fe_3O_4$/Fe/graphene nanocomposite powder is clearly established by comparison of the results with those obtained for $Fe_3O_4$/Fe nanocomposite powder and is attributed to alleviation of volume change, good distribution of electrode active materials, and improved electrical conductivity upon the addition of graphene.