• The KSFM Journal of Fluid Machinery
• /
• v.19 no.2
• /
• pp.21-26
• /
• 2016

The objective of present study is to assess the performance of the first stage compressor in a total 3-stage 5000 HP-level turbo compressor. CFD commercial code, CFX has been used to predict three-dimensional flow characteristics inside of the impeller. Shear Stress Transport (SST) model has been used to simulate turbulent flows through Reynolds-averaged Navier-Stokes (RANS) equations. Grid dependency has been also checked to get optimal grid distribution. Numerical results have been compared with the experimental test results to elucidate performance characteristics of the present compressor. In addition, flow characteristics of the impeller only have been studied for various blade configurations. Angular offset in leading edge of the blade has been selected for the optimal blade design. Performance characteristics in region of low mass flow rate and high pressure ratio between the impeller entrance and exit have been investigated for the selection of optimal blade design. Also, flow instability such as stall phenomena has been studied and anti-stall characteristics have been checked for various blade configurations in the operational window.

• Journal of Welding and Joining
• /
• v.7 no.3
• /
• pp.28-35
• /
• 1989

It was reported that the toughness for welded region was influenced by various factors such as the gradient for prior austenite grain size, the variation of microhardness and the characteristic microstructure depending on distance from the fusion boundary. Therefore, in order to evaluate the fracture strength of the weldment in which the microstructures change continuously, it is important to assess the peculiar strength of each microstructure in welded region. It was known that the small punch(SP) test technique which was originally developed to study the irradiation damage effect for the structures of nuclear power plant was also useful to investigate the strength evaluating of nonhomogeneous materials. In this paper, by means of a small punch test technique the possibility of evaluating strength of parent and welded region in SS41 and SM53B steels was investigated. The obtained results are summerized as follows: 1) The small punch test which showed markedly the ductile-brittle transition behavior in this experiment may be applied to evaluation for the fracture strength of welded region. 2) It was shown that the ductile-brittle regime lied in Region III(plastic membrane stretching region) of the flow characteristics observed in SP test. 3) The SP test technique which shows a more precipitous energy change transition behavior than the other test technique is able to estimate the more precise transition temperature. 4) It could be seen that in comparision with the structure of parent the structure of weld HAZ in SS41 steel was improved while it in SM53B steel was deteriorated.

• Ocean and Polar Research
• /
• v.36 no.2
• /
• pp.189-197
• /
• 2014

The pearl-spot damsel, Chromis notata, is one of the important fishery species in Korea. While C. notata has been commonly harvested in southern Korea, the increasing number of C. notata in higher latitudes has crucial ecological, economic and evolutionary implications under conditions where the climate is rapidly changing. Here we examined the morphological and genetic characteristics of C. notata to assess patterns of geographical variations among the groups from three different sites. The groups were clearly distinguishable in the analysis of morphological characteristics. On the other hand, the groups were genetically indistinguishable. All individuals fell within a single clade in the neighbor-joining tree but appeared scattered in the haplotype network. Several haplotypes are shared among the sampling sites (Jejudo-Ulleungdo; Hap 9, Wangdolcho-Ulleungdo; Hap 28, Hap 33, Hap 34). Although control region markers did not elucidate the spatial patterns in genetic characteristics, Wangdolcho and Ulleungdo groups appear to exhibit a more robust gene flow between the two groups than with Jejudo group. Integrative approaches such as those combining morphological and genetic analyses minimize potential errors caused by limited perspectives of each analysis and can provide useful information for discovering functional DNA regions attributable to morphological characteristics expressions.

• Journal of International Society for Simulation Surgery
• /
• v.1 no.2
• /
• pp.75-79
• /
• 2014

Purpose The region growing has a critical problem that it often extract vessels with unexpected objects such as a bone which has a similar intensity characteristics to the vessel. We propose the new method to extract arterial vascular anatomy around the stomach from the CTA volume without the post-processing. Materials and Methods Our method, which is also based on the region growing, requires the two seed points from the use. I automatically extracts perigastric arteries using the adaptive region growing method and it does not need any post-processing. Results The three region growing based methods are used to extract perigastric arteries - the conventional region growings with restrict and loose thresholds each and the proposed method. The 3D visualization from the result of our method shows our method extracted the all required arteries for gastric surgery. Conclusion By extracting perigastric arteries using the proposed method, over-segmentation problem that unexpected anatomical objects such as a rib or backbone are also segmented does not occurs anymore. The proposed method does not need to sensitively determine the thresholds of the similarity function. By visualizing the result, the preoperative simulation of arterial vascular anatomy around the stomach can be possible.

• Journal of the Economic Geographical Society of Korea
• /
• v.18 no.3
• /
• pp.319-334
• /
• 2015

This study aims at identifying the industrial distributional characteristics of creative industry in Chungnam Province. It finds that there are 11 sectors of creative industrial in Chungnam region. In order to find out the specific characteristics of creative industry in Chungnam, it firstly carried out LQ analysis on the 11 sectors by the 16 counties of the region. It turns out that the distributional characteristics differs between county by county in terms of RCC, BQ and IG effect. These results may imply the needs of regional specific industrial development strategy by the 16 counties in Chungnam Province.

• Journal of the East Asian Society of Dietary Life
• /
• v.27 no.4
• /
• pp.450-458
• /
• 2017

The purpose of this study was to investigate the levels of risk perception characteristics for food risk elements using a psychometric paradigm from 298 university students in Yeungnam region, Korea, by a self-administered questionnaire. The respondents showed the highest level of risk concern about radioactive contaminated foods and the lowest level about GM (genetically modified) foods. In the risk perception characteristics for food risk elements, they perceived radioactive contaminated foods as a catastrophic, worried, new, and uncontrollable risk. In addition, they regarded food additives and foodborne illness as a chronic, controllable, old, and scientifically and individually known risk. According to the results of the factor analysis for risk perception characteristics, dread and unknown were categorized. In the risk perception map, mad cow disease, heavy metal contaminated foods, and radioactive contaminated foods were considered as a dreaded and unknown risk, whereas pesticide residues and GM foods were perceived as a less dreaded and unknown risk. Additionally, food additives and foodborne illness were regarded as a less dreaded and known risk and endocrine disruptors and avian influenza as a dreaded and known risk. These results imply that risk perception characteristics of consumers should be considered to establish strategies for risk communication in food science.

• Water for future
• /
• v.29 no.1
• /
• pp.163-179
• /
• 1996

Flood flow characteristics of the Han River (from Goan to Indo Bridge) are analyzed using 1-dimensional St. Venant equations. NETWORK, a finite difference model, is used to calculate each term (local acceleration term, convective acceleration term, pressure force term, gravity force term, and friction force term) of the momentum equation and to analyze the flow characteristics. By the result of the study, as the general characteristics of flow in a channel that acceleration terms are very small and the other three terms are much greater is presented, three terms(pressure force term, gravity force term, friction force term) are to be main terms which decide the characteristics of flow. Specially in this region the acceleration term is noted so large that it cannot be ignored according to the shape of hydrograph and the region.

• Journal of Korean Elementary Science Education
• /
• v.22 no.2
• /
• pp.200-210
• /
• 2003

This study is focused to characteristics of earth region vocabularies used in 7th curricula science textbooks for 3rd to 6th grades of elementary school. The numbers of earth region vocabularies are generally increased from the lower to the higher grade textbooks, ‘science’ and ‘experiments and observation’. In ‘science’ textbooks, numbers and use frequencies of earth region vocabularies are predominant in astronomy and atmospheric science vocabularies. Meanwhile, in ‘experiment and observation’, domains related with astronomy have relatively more numbers of the vocabularies but domains related with geology have higher use frequencies of those vocabularies relative to domains related with another areas. ‘Strata’ and ‘fossil’ of geology vocabularies, ‘air temperature’ of atmospheric science vocabularies and ‘sun’ and ‘planet’ of astronomy vocabularies are commonly the highest frequent in the use for science textbooks and experiment and observation. In the both books, earth region vocabularies are derived from 70% to 80% words of Chinese, below 10% of pure Korean, and rest of other languages. Additionally, cases of pure Korean vocabularies unpacked from professional nomenclatures, ones without previous explanations and multiple vocabulary applications to same phenomena are observed in the both books. Synthesizing above results, it is suggested that the reconsideration of domains related with each area of earth science and vocabulary uses assigned to above cases is necessary, in possible.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.4
• /
• pp.997-1008
• /
• 1994

Heat transfer by laminar oscillating flow in a circular pipe has been studied analytically. The general solution with respect to the arbitrary wall boundary condition is obtained by superposing the fluid temperatures with the sinusoidal wall temperature distributions. The fulid temperature distributions are two dimensional, but uniform flow assumption is used to simplify the velocity distribution. The heat transfer characteristics in the thermally developing regions are analyzed by applying the general solution to the two cases of thermal boundary conditions in which the wall temperature and wall heat flux distributions have a square-wave form, respectively. The results show that the length of the thermally developing region becomes larger in proportion to the oscillation frequency at slow oscillation and eventually approaches to the value comparable to the swept distance as the frequency increases. The time and cross-section averaged Nusselt number in the developing region is inversely proportional to the square root of the distance from the position where the wall boundary condition is changed suddenly. In the developed region, Nusselt number is only determined by the oscillation frequency.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.5
• /
• pp.1291-1299
• /
• 1995

In confined coaxial jets, the flow-mixing characteristics depend on the initial conditions at the nozzle outlet such as velocity ratio and nozzle radius ratio. In this study, nozzle ratio(inner/outer) was 0.3. Longitudinal axial velocity, turbulent intensity and Reynolds shear stress were measured by CTA. Measurements were made from the duct inlet to the region where similarity solution could exist. This study investigated flow charicteristics according to the variation of similitude parameter which was derived from the theory of Craya-Cutet. The range of similarity region depends on the variation of the similitude patameter. The form factor obtained from the axial velocity profile in the similarity region was constant. The higher the similitude parameter, the wider the spread rate of the jets. Due to this fact, the similarity conditions developed more quickly and the region where the similarity holds became narrow. Present experimental data confirmed the validity of Craya-Curtet theory.