• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.256-259
• /
• 2008

The gasification of biomass, sawdust, was carried out in order to investigate gasification characteristics. The experiment was performed using a down-draft fixed bed gasifier to surpass tar components generation in the gasification process. In the experiments, we investigated synthetic gas composition by varying reaction temperature, steam/carbon ratio, and excess ratio (ER), respectively. Higher reaction temperature, $700^{\circ}C$ to $900^{\circ}C$, could obtain higher $H_2$ yield. However, we could not obtain any meaning data by varying S/C ratio. Using $O_2$-LNG burner in the top of the gasifier may surpass water-gas shift reaction by increasing $CO_2$ concentration from the LNG-$O_2$ combustion reaction.

• 한국수소및신에너지학회논문집
• /
• 제33권6호
• /
• pp.808-818
• /
• 2022

In this research paper, we investigated the cryogenic line chill down characteristics of liquefied natural gas (LNG). A numerical analysis model was established and verified so that it can calculate the precise cooling characteristics of cryogenic fluid for the stable and safe utilization especially such as LNG and liquid hydrogen. The numerical modeling was programmed by C++ as an one-dimensional homogeneous model. The thermohydraulic cooling process was simulated using mass, momentum, energy conservation equations and appropriate heat transfer correlations. In this process, the relevant heat transfer correlations for nuclear boiling, transition boiling, film boiling, and single-phase heat transfer that can predict the experimental results were implemented. To verify the numerical modeling, several cryogenic line chill down experiments using LNG were conducted at the Korea Institute of Machinery & Materials (KIMM) LNG and Cryogenic Technology Center.

• 한국안전학회지
• /
• 제9권4호
• /
• pp.3-10
• /
• 1994

This study examines fracture characteristics of wire rope of 6$\times$37+FC 14mm B degree, Which has been widely used for the strength support for machinery, cranes and shipping. The examination Is based on the fellowing experimental conditions. Firstly, this study analyzes the effect of the strength of wlre rope. When number of broken wires is occuring at the level of 5%, 10% and 15% degree respectively in the following two cases：1) Case of broken down to each strand equally. 2) Case of broken down to one strand only. Secondly, this study analyzes the effect of corrosion on the strength of wire rope. Corrosion times are 72hours, 144hours and 216hours corrosion respectively under following conditions. 1) Case of only a corrosion without wire breaking. 2) Case of corrosion after 5% degree wire breaking to each strand equally. Some outcomes of these experiment are as follows. 1) From the of tension test, We can find that the ratio of strength reduction case of wire broke down to one strand concentrically is greater than that ratio case of broke down to each strand equally. 2) From the corrosion test, We can also find that the ratio of strength reduction case of corroded after 5% degree wire breaking to each strand equally Is greater than that ratio case of corroded without wire breaking. 3) After comparing theoretical fracture load of wires with experimental fracture load of wires, we can find the fracture load of the case of broken down to each strand equally is most similar to theoretical fracture load. 4) It is proposed that safety rules on wire rope in the Industrial safety and healthy labor of law have to change “breaking over 10% of number of wires in one strand of wire rope(excluded filler wire )”has to be replaced by“breaking over 10% of number of all wires in all strand of wire rope(excluded filler wire)”

• 한국지반환경공학회 논문집
• /
• 제14권12호
• /
• pp.61-69
• /
• 2013

도로 및 철도의 터널 공사가 증가함에 따라 공사 시에 다양한 지반조건에서 터널 공사 단계를 진행하고 있다. 특히, 석회암 지역에서 터널 공사를 진행하게 되는 경우에는 대부분의 공동이 터널 계획구간에 존재하고 있는 실정이다. 하나 또는 그 이상의 공동은 터널의 안정성을 저하하는 것으로 예상된다. 따라서, 본 연구에서는 터널과 공동과의 상호 영향을 알아보고자 실내 모형 축소실험과 수치해석을 시행하였다. 실내모형실험은 터널과 공동 간의 거리에 따른 모형지반의 파괴하중을 확인하였고, 공동의 형상에 따른 파괴하중을 확인하였다. 실내모형실험결과 파괴하중은 공동과 터널 간의 거리가 0.5D 이내로 감소함에 따라서 파괴하중 역시 감소하는 것으로 나타났다. 수치해석은 모형실험의 검증을 위해 시행하였으며, 실내모형실험과 동일하게 터널과 공동 간의 거리가 0.5D 이내로 근접하는 경우 터널의 안정성이 저하되는 것으로 확인되었다.

• 대한통합의학회지
• /
• 제5권2호
• /
• pp.33-42
• /
• 2017

Purpose: This study examined the effects of the fumanet exercise program on the cognitive function and fall down-related physical fitness factor in elderly people. Method: The study period was May 2-June 24, 2016. The participants included 20 elderly persons (control group 10, experimental group 10) who registered at the day-care Center in G. City. Descriptive statistics were used for the analysis of the control and experimental groups' general characteristics. The chi-square and Mann-Whitney U tests were conducted to identify the two groups' general characteristics' and dependent variables' homogeneity. The Wilcoxon signed-rank test was used to compare the pre-and post-intervention cognitive function and fall down-related physical fitness factor, and a Mann-Whitney U test was used to analyze the rate of cognitive function and fall down-related physical fitness factor changes between the groups after the intervention. Result: The participants' fall down-related physical fitness factors (balance, gait, leg strength) increased and memory in the cognitive function sub-area improved in the participants who participated in the fumanet exercise program. The amount of change in gait was significantly different between the control and experimental groups. Conclusion: The fumanet exercise program included gait training using the learn, remember and repeat phased steps. Therefore, this study proposes using the fumanet exercise program to improve the elderly's cognitive function and physical fitness factor.

• 한국산학기술학회논문지
• /
• 제12권9호
• /
• pp.3834-3842
• /
• 2011

본 연구에서는 선천적으로 관절 느슨함과 낮은 근 장력을 갖고 있는 다운증후군아동 보행의 운동학적 특성을 알아보고자 한다. 특히 자료수집의 편리성과 재현성이 높고, 유용한 보행훈련도구로서 그 사용이 증가되는 추세인 트레드밀에서 보행을 실시하였다. 다른 중복장애가 없는 다운증후군 남자아동 10명을 대상으로 적외선카메라로 3차원 보행 자료를 수집하여 시공간적 변인과 운동학적 변인을 산출하여 이들의 보행특성을 분석하였다. 그 결과, 다운증후군아동들은 선천적인 근골격계 특성으로 인한 보행불안정성을 극복하기 위해 엉덩, 무릎, 발목관절 모두를 구부리고 걷는 구부정 걸음(crouch gait)형태를 보였으며, 모든 다리관절의 신전을 작게 하여 결과적으로 추진력이 자제하였다. 이는 더 크게 신체를 추진할수록 발뒤꿈치 착지 시에 체중수용의 부담이 증가하기 때문인 것으로 판단된다. 이 연구 결과는 다운증후군의 관절불안정성을 개선하기 위해 효과적인 근 골격계 강화훈련 프로그램을 마련하는데 유용한 자료를 제공할 것으로 기대되며, 다운증후군뿐만 아니라 선천적 또는 후천적 근골격계 장애를 개선하거나 극복할 수 있는 운동프로그램 개발에도 참고 자료가 될 것으로 예상된다.

• 한국식품조리과학회지
• /
• 제19권2호
• /
• pp.216-222
• /
• 2003

The effects of hydrolysis times and calcium source additions (calcium lactate, calcium carbonate), on the qualify characteristics of soy ice cream prepared with soy protein isolate(SPI), were studied. Increasing the hydrolysis time decreased the viscosity and overrun of soy ice creams, but increased the melt-down property. The addition of calcium lactate increased the viscosity of the soy ice cream mix, but no changes were observed from the calcium carbonate addition. The overrun of calcium lactate samples was higher than on addition of calcium carbonate. The addition of calcium lactate and calcium carbonate resulted in decreased melt-down properties, although these effects were more evident in the calcium lactate samples. However, calcium carbonate addition resulted in higher scores in the overall quality of the soy ice creams. In conclusion, better soy ice cream could be prepared by treating the SPI with Flavorzyme for 50 min, along with calcium fortification in the form of calcium carbonate.

• 한국정밀공학회지
• /
• 제15권6호
• /
• pp.58-63
• /
• 1998

There are lots of factors that are related to the geometric characteristics of machined surface. Among them, the tool path and milling mode (up cut milling or down cut milling) are the easiest controllable machining conditions. Thus, the first objective of this research is to study the effects of them on the milled surface that is generated by an end milling tool. To get precision parts, not only the machining process but also the measurement of geometric tolerance is important. But, this measurement requires a lot of time, because the infinite surface points must be measured in the ideal case. So, the second objective is to propose a simple flatness measurement method that can be available instead of the 3-D geometric tolerance measurement method, using a scale factor and characterized points. Finally, it is also shown that the possibility of flatness improvement by shifting the consecutive fine cutting tool path as compared with the last rough cutting tool path.

• Nuclear Engineering and Technology
• /
• 제46권5호
• /
• pp.689-698
• /
• 2014

Reactor internals are sensitive to dynamic loads such as earthquakes and flow induced vibration. Thus, it is essential to identify the dynamic characteristics to evaluate the seismic integrity of the structures. However, a full-sized system is too large to perform modal experiments, making it difficult to extract data on its modal characteristics. In this research, we constructed a finite element model of the APR1400 reactor internals to identify their modal characteristics. The commercial reactor was selected to reflect the actual boundary conditions. Our FE model was constructed based on scale-similarity analysis and fluid-structure interaction investigations using a fabricated scaled-down model.

• 대한기계학회논문집A
• /
• 제26권10호
• /
• pp.2159-2164
• /
• 2002

This paper reports on the effects of additional factors on the engine friction characteristics. The total friction loss of engine is composed of pumping and mechanical friction loss. The pumping loss was calculated from the cylinder pressure, and the mechanical friction loss was measured by strip-down method under the motoring condition. The various parameters were tested. The engine friction loss was much affected by oil and coolant temperature. The low viscosity oil was very effective to reduce the friction loss, and friction modifier was very useful to reduce the friction loss at lower engine speed. The engine friction loss was varied with engine running time because of surface roughness decreasing and oil degradation. To prevent oil-churning effect, it was very important to maintain the proper oil level. The presented results will be very useful to understand friction characteristics of engine.