• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2013년도 춘계학술대회
• /
• pp.96-98
• /
• 2013

본 연구는 역대 CES에 출품된 디지털 TV의 특성을 기술의 수요곡선과 대체곡선의 관점에서 분류하여 살펴봄으로써 스마트 환경으로 진화하는 차세대 멀티미디어에 대한 예측을 제공하고자 하였다. 분석결과 초기 디지털 TV의 형태에서 기기 간 연결성(connected)을 키워드로 하는 2013년 등장한 스마트 형 디지털 TV에 이르기까지 디지털 TV는 기술 수요 곡선을 따라 진화를 거듭해왔으며, 현재 상품으로서의 수명주기의 성숙기에 이르는 것으로 나타났다. 또한 2013년 출품된 디지털 TV는 TV라는 단일 제품의 범위를 넘어서 다기능 멀티미디어 환경을 지원, 곡선형 또는 flexible 디스플레이 형태로 이미 과거의 디지털 TV의 기술 수요곡선을 넘어서 대체곡선의 도입기에 이르고 있는 것으로 나타났다.

• 한국식품과학회지
• /
• 제29권2호
• /
• pp.273-278
• /
• 1997

몇가지 채소류(오이, 무우, 마늘, 생강 및 감자)의 펀치특성을 살펴보기 위하여 식품물성 측정기로 일정하게 힘을 가하면서 힘-거리-시간 간의 관계를 살펴보고 성분함량 및 세포특성과의 관계를 살펴본 결과는 다음과 같다. 힘-거리 및 거리-시간 곡선 상에는 많은 변곡점 및 파괴점이 관찰되었으며, 이는 시료의 구성세포가 가해진 힘에 대해 저항 또는 항복할때 나타나는 현상으로 탐침속도가 느릴때 크고 분명하였다. 파괴점까지 힘-시간 및 거리-시간에 대한 회귀분석 결과 상관계수는 0.95이상이었다. 탐침이 시료를 관통하는 시간과 그때의 힘은 생강이 5.63초 및 4.88 N으로 컸고 오이가 4.15초 및 2.00 N으로 작았으며, 탐침속도가 빠를 수록 더 많은 파괴힘을 필요로 하였다. 상관관계 분석결과 세포가 클수록 수분함량이 많고 파괴거리가 커지며, 세포의 규칙성, 시료의 즙액, 조밀도와 힘-시간 간의 기울기는 작아지는 관계를 보였다. 비중이 클수록 파괴힘, 거리 및 시간은 작아졌으며, 거리-시간곡선의 기울기는 힘-시간곡선의 기울기와 반비례 관계가 있었다.

• 한국물환경학회지
• /
• 제26권6호
• /
• pp.903-909
• /
• 2010

The purpose of this study was evaluated on the applicability of Load Duration Curve Method (LDC Method) using HSPF watershed model and sampling data for efficient TMDLs in Korea. The LDC Method was used for assessment pollutant characteristics in watershed and water quality variation in each water flow level. Load Duration Curve is applied for judge the level of impaired water-body and can be estimated the impaired level by pollutant, such as BOD, T-N, and T-P in this study depending on variation of stream flow. As a result, BOD, T-P was usually exceed the standard value at low flow and dry hydrologic period. Improvement of effluent concentration from WWTP and riparian buffer protection zone are effective to improve the water quality. T-N showed the worst condition at mid-range hydrologic period and moist hydrologic period. Therefore, soil erosion control program and BMPs for non-point source pollution control is effective for recovery the water quality, which can be useful method for management of water quality in the plan of recovery water quality spontaneously. Applicability of LDC Method was evaluated in the Nakbon A watershed. However, we need to consider more detailed and accumulated data set such as accurate GIS data and detail pollution data, and WWTP discharge water quality data for accurate evaluation of watershed. Overall, The LDC Method is adequate for evaluation of watersheds characteristics, and its application is recommended for watershed management and TMDL Implementation.

• 복식
• /
• 제50권2호
• /
• pp.167-182
• /
• 2000

The purpose of this study is to examine the art nouveau fashion represented in the end of the twentieth century. The characteristics of art nouveau are naturalism, medievalism , exoticism, and decadentism. The influences of art nouveau were seen in the fashion of the late nineteenth century : S-curve silhouette and organic curve motives printed on hems. Art nouveau has reappeared in modern fashion trends such as romanticism , decadence, ecology, ethno, and fusion. To sum up, art nouveau fashion at the end of the twentieth century is classified into four shapes. First, art nouveau appears in naturalism. Influenced by the arts and crafts movements and naturalistic trend, it has reappeared at the end of the twentieth century in themes like 'art & craft'. This expression technique is to objectively nature and to represented art nouveau textiles. Second, S-curve silhouette appeared at the end of nineteenth century's fashion with the art nouveau influenced rejection of the bustle style. At the end of the twentieth century, the design , emphasizing the hip, is represented in fashion collections as a phenomenon of romanticism . Especially the art nouveau silhouette of the end of the twentieth century does not represent S-curve silhouette. But , it emphasizes the hip only. Third, Art nouveau exoticism by symbolism is influenced by Chinese and Celtic art, the Middle Ages, and the exoticism that appeared in fashion at the end of the nineteenth century : harem style, kimono style, and turbans. Exoticism at the end of the twentieth century is expressed by optical flower prints and successive floral print arrangements as seen in the themes of ethno and fusion. Fourth, one of the characteristics of art nouveau, decadence is influenced by the pre-raphaelite brotherhood. This is expressed in the images of vampires, and symbolism expressing grotesque insect motives and decadent successive curves. At the end of the twentieth century decadence is represented in fashion ; grotesque insect motives, tatto looks of organic curve motives celtic hair style, see-through fashion, grotesque make-up . Besides hair style techniques, decadent expressions applying art nouveau paintings also appeared. Finally , art nouveau fashion represented as a fashion trend at the turning point to the new millennium is one of great significance as an organic, an environment-intimate and continuance-possible design in a future.

• 한국재료학회지
• /
• 제12권1호
• /
• pp.75-81
• /
• 2002

The ferroelectric properties of Pb(Zr,Ti)O$_3$[PZT] films degrade when the films with Pt top electrodes are annealed in hydrogen containing environment. This is due to the reduction activity of atomic hydrogen that is generated by the catalytic activity of the Pt top electrode. At the initial stage of hydrogen annealing, oxygen vacancies are formed by the reduction activity of hydrogen mainly at the vicinity of top Pt/PZT interface, resulting in a shift of P-E (polarization-electric field) hysteresis curve toward the negative electric field direction. As the hydrogen annealing time increases, oxygen vacancies are formed inside the PZT film by the inward diffusion of hydrogen ions, as a result, the polarization degrades significantly and the degree of P-E curve shift decreases gradually. The direction and the magnitude of the remnant polarization in the PZT film affect the motion of hydrogen ions which determines the degradation of polarization characteristics and the shift in the P-E hysteresis curve of the PZT capacitor during hydrogen annealing. When the remnant polarization is formed in the PZT film by applying a pre-poling voltage prior to hydrogen annealing, the direction of the P-E curve shift induced by hydrogen annealing is opposite to the polarity of the pre-poling voltage. The hydrogen-induced degradation behavior of the PZT capacitor is also affected by the internal field that has been generated in the PZT film by the charges located at the top interface prior to hydrogen annealing.

• 한국안전학회지
• /
• 제13권4호
• /
• pp.172-179
• /
• 1998

The effects of $^{60}Co\;{\gamma}-Ray$ irradiation on TSC characteristics of TFE type polytetrafluoroethylene(PTFE) were investigated. The $\alpha$ peak on TSC curve of PTFE was decreased, while the $\beta$ peak was reversely increased by the increasing of $\gamma$-irradiation doses up to 80 krad(0.8 kGy). Moreover, $\alpha$ and $\beta$ peaks on TSC curve of the irradiated PTFE are changed with the increasing of the forming temperature and forming electric field. In annealing the irradiated PTFE specimens at room temperature in air, it was shown a continuous recovery of TSC characteristics with time, which is assumed the traped charge carriers are liberated from the shallow traps and undergoes a recombination process during room temperature decay.

• 오토저널
• /
• 제12권5호
• /
• pp.76-84
• /
• 1990

To study diesel fuel spray behavior, an experimental study was undertaken to investigate injection characteristics in vary ing back pressure and atomization mechanism in a non-evaporating diesel spray. Generally, injection characteristics is the curve of fuel flow plotted against time. The area under this curve is equal to the total quantity of fuel discharged for one injection. The method that measures rate of injection is long tube-type fuel rate indicator. Diesel spray injected into a quiescent gaseous environment under high pressure is observed by taking high speed camera by the focused shadow photographs. The results show that, at the start of injection, as the injected fuel rushes into the quiescent atmosphere the spray angle becomes large. Finally the spray stabilizes at a constant cone angle. Spray penetration length increases with the injection pressure.

• 산업기술연구
• /
• 제12권
• /
• pp.15-23
• /
• 1992

This research is to investigate the effect of base roughness of footing on characteristics of load-settlement curve. Parametric experiments of small scaled model test were performed with changing the properties of base roughness of model footing; Gluing the vinyl, aluminum, sand paper, sand beneath the model footing surface. The width of model footing and relative density of soil foundation were also changed to investigate their effects on settlement characteristics of footing. The ultimate bearing capacity as well as the initial slope of load-settlement curve obtained from test results were compared with those from limit equilibrium methods proposed by Terzaghi, Hansen and Meyerhof. From test results, it was confirmed that the base roughness affected the failure mechanisms of showing different shapes of slip lines formed beneath the footing.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 추계학술대회 논문집
• /
• pp.372-375
• /
• 2007

750kW gearless type wind turbine, named U50, is developed by UNISON in Korea. The newly developed wind turbine should be evaluated the power curve and the estimated annual energy production by following international standard to verify the power performance characteristics. This paper shows the test and evaluation procedure according to IEC 61400-12-1 which specifies a procedure of measuring the power performance characteristics of a single wind turbine and applies to the testing of wind turbines of all types and sized connected to the electrical power network. And this paper also shows the power performance characteristics for U50 wind turbine which is determined in accordance with IEC regulation.

• Journal of Welding and Joining
• /
• 제12권4호
• /
• pp.151-161
• /
• 1994

FCAW has wide application in ship fabrication, maintenance and field erection. It has many advantages over SMAW.SAW and GMAW process. In many applications, the FCAW provides highquality weld metal. This method can reduce weld defects especially porosity and spatter. But the fatigue characteristics of those deposited metal have been rarely investigated. The purpose of this study is to investigate the cyclic stress-strain behavior and fatigue tests by the constant strain control were carried out on the rounded smooth specimen with deposited metal using the metal type flux cored wire. As the results of this study for the deposited metal welded by the metal type flux cored wire, the hardening or softening characteristics under cyclic load were investigated and cyclic stress-strain curve, strain-fatigue life curve, stress-strain function and fatigue life relation which are useful to estimate the fatigue life under the stress concentration condition were obtained.