• Journal of Information Processing Systems
• /
• v.8 no.1
• /
• pp.1-20
• /
• 2012

The most important criterion for achieving the maximum performance in a wireless mesh network (WMN) is to limit the interference within the network. For this purpose, especially in a multi-radio network, the best option is to use non-overlapping channels among different radios within the same interference range. Previous works that have considered non-overlapping channels in IEEE 802.11a as the basis for performance optimization, have considered the link quality across all channels to be uniform. In this paper, we present a measurement-based study of link quality across all channels in an IEEE 802.11a-based indoor WMN test bed. Our results show that the generalized assumption of uniform performance across all channels does not hold good in practice for an indoor environment and signal quality depends on the geometry around the mesh routers.

• Journal of Information Technology Services
• /
• v.9 no.2
• /
• pp.163-177
• /
• 2010

In this paper, we consider a channel ordering problem that seeks to maximize the service quality in mobile radio communication systems. If a base station receives a connection request from a mobile user, one of the empty channels belonging to the base station is assigned to the mobile user. In case multiple empty channels are available, we can choose one that incurs least interference with other channels assigned to adjacent base stations. However, note that a pair of channels that are not separated enough generates interference only if both channels are assigned to mobile users. That is, interference between channels may vary depending on the channel assignment sequence for each base station and on the distribution of mobile users. To find a channel assignment sequence that seems to generate minimum interference, we develop an optimization model considering various scenarios of mobile user distribution. Simulation results show that channel assignment sequence determined by the scenario based optimization model significantly reduces the interference provided that scenarios and interference cost are properly generated.

• Proceedings of the Ginseng society Conference
• /
• 2003.12a
• /
• pp.6-6
• /
• 2003

• The Korean Journal of Physiology and Pharmacology
• /
• v.21 no.2
• /
• pp.215-223
• /
• 2017

The effects of acidic pH on several voltage-dependent ion channels, such as voltage-dependent $K^+$ and $Ca^{2+}$ channels, and hyperpolarization-gated and cyclic nucleotide-activated cation (HCN) channels, were examined using a whole-cell patch clamp technique on mechanically isolated rat mesencephalic trigeminal nucleus neurons. The application of a pH 6.5 solution had no effect on the peak amplitude of voltage-dependent $K^+$currents. A pH 6.0 solution slightly, but significantly inhibited the peak amplitude of voltage-dependent $K^+$ currents. The pH 6.0 also shifted both the current-voltage and conductance-voltage relationships to the depolarization range. The application of a pH 6.5 solution scarcely affected the peak amplitude of membrane currents mediated by HCN channels, which were profoundly inhibited by the general HCN channel blocker $Cs^+$ (1 mM). However, the pH 6.0 solution slightly, but significantly inhibited the peak amplitude of HCN-mediated currents. Although the pH 6.0 solution showed complex modulation of the current-voltage and conductance-voltage relationships, the midpoint voltages for the activation of HCN channels were not changed by acidic pH. On the other hand, voltage-dependent $Ca^{2+}$ channels were significantly inhibited by an acidic pH. The application of an acidic pH solution significantly shifted the current-voltage and conductance-voltage relationships to the depolarization range. The modulation of several voltage-dependent ion channels by an acidic pH might affect the excitability of mesencephalic trigeminal nucleus neurons, and thus physiological functions mediated by the mesencephalic trigeminal nucleus could be affected in acidic pH conditions.

• The Korean Journal of Physiology and Pharmacology
• /
• v.9 no.1
• /
• pp.37-43
• /
• 2005

Our previous report demonstrated that chick myoblasts are equipped with $Ca^{2+}$-permeable stretchactivated channels and $Ca^{2+}-activated$ potassium channels ($K_{Ca}$), and that hyperpolarization-induced by $K_{Ca}$ channels provides driving force for $Ca^{2+}$ influx through the stretch-activated channels into the cells. Here, we showed that acetylcholine (ACh) also hyperpolarized the membrane of cultured chick myoblasts, suggesting that nicotinic acetylcholine receptor (nAChR) may be another pathway for $Ca^{2+}$ influx. Under cell-attatched patch configuration, ACh increased the open probability of $K_{Ca}$ channels from 0.007 to 0.055 only when extracellular $Ca^{2+}$ was present. Nicotine, a nAChR agonist, increased the open probability of $K_{Ca}$ channels from 0.008 to 0.023, whereas muscarine failed to do so. Since the activity of $K_{Ca}$ channel is sensitive to intracellular $Ca^{2+}$ level, nAChR seems to be capable of inducing $Ca^{2+}$ influx. Using the $Ca^{2+}$ imaging analysis, we were able to provide direct evidence that ACh induced $Ca^{2+}$ influx from extracellular solution, which was dramatically increased by valinomycin-mediated hyperpolarization. In addition, ACh hyperpolarized the membrane potential from $-12.5{\pm}3$ to $-31.2{\pm}5$ mV by generating the outward current through $K_{Ca}$ channels. These results suggest that activation of nAChR increases $Ca^{2+}$ influx, which activates $K_{Ca}$ channels, thereby hyperpolarizing the membrane potential in chick myoblasts.

• Nuclear Engineering and Technology
• /
• v.51 no.8
• /
• pp.1897-1904
• /
• 2019

Three-layer back propagation network (BPN) and genetic neural network (GNN) were developed in this study to predict the flow boiling heat transfer coefficient (HTC) in conventional and small-diameter channels. The GNN has higher precision than BPN (with root mean square errors of 17.16% and 20.50%, respectively) and other correlations. The inputs include vapor quality x, mass flux G, heat flux q, diameter D and physical parameter φ, and the predicted flow boiling HTC is set as the outputs. Influences of input parameters on the flow boiling HTC are discussed based on the trained GNN: nucleate boiling promoted by a larger saturated pressure, a larger heat flux and a smaller diameter is dominant in small channels; convective boiling improved by a larger mass flux and a larger vapor quality is more significant in conventional channels. The HTC increases with pressure both in conventional and small channels. The HTC in conventional channels rises when mass flux increases but remains almost unaffected in small channels. A larger heat flux leads to the HTC growth in small channels and an increase of HTC was observed in conventional channels at a higher vapor quality. HTC increases inversely with diameter before dry out.

• Korean Journal of Acupuncture
• /
• v.19 no.1
• /
• pp.107-130
• /
• 2002

In the clinics of traditional medicine, various acupuncture methods, that is Sa-Am' acupuncture, scalp acupuncture, auricular acupuncture and Dong-Shi' acupuncture, have been introduced and increased gradually to treat the diseases. In this bibliographic study, we examined the interrelation between the Dong Shi' acupuncture and 12 regular channels. The theoretical origination of Dong Shi' acupuncture and 12 regular channels was applied from Yin and Yang, Five Element, State of Viscera and so on. As the treatment using by 12 regular channels have used to 'regulating Qi and Treating Shin (調氣治神)', Dong Shi' acupuncture have used to the itself defense mechanism and relative balance of human beings. Also, these methods have the same rules that was selected to the opposing needling (巨刺) of remote point selection, however, Ah-Shi' points (阿是穴) were not used for the selection. Of Dong-Shi' acu-points, there were many ones which have the same location as the acupoints of regular channels. However, these one was renamed according to the new characteristics and therapeutics found by Dong Shi. Dong Shi' acupuncture has divided human body to the 12 areas but not considered to the concept of a mutual connection of human being body. The needling manipulation methods were vary at the regular channels, but Dong Shi' acupuncture did not use the traditional manipulation method except for supplementary Dong-Qi acupuncture, To-Ma acupuncture and To-In acupuncture. From these study, we found that the Dong-Shi' acupuncture have something in common with 12 regular channels, although the Dong-Shi' acupuncture was not based on the theory of 12 regular channels.

• Journal of Wetlands Research
• /
• v.11 no.1
• /
• pp.65-73
• /
• 2009

We investigated characteristics of channel morphology, flora and vegetation distribution at the main and the abandoned channels of the Hwangguji Stream and the Cheongmi Stream. The analysis of aerial photographs and old topographical maps showed that the abandoned channels were made by cut-off from the main channel due to the construction of artificial levee. The total number of species and percentage of exotic plants at the main channels were higher than those at the abandoned channels. At the abandoned channel, the percentage of species number of hydrophytes and hygrophytes was higher than those at the main channels in the both stream. The results of principal component analysis (PCA) showed that the floral structure between at the main and the abandoned channel was more similar in the Hwangguji Stream than that in the Cheongmi Stream. The relative distribution areas of hydrophytes and hygrophytes at two abandoned channels were much higher than those at the main channels in the both stream. The dominant plant was an emergent macrophyte, Zizania latifolia at two abandoned channels. Therefore, flora and vegetation at the abandoned channel showed more hydric and lentic characteristics and provided diversity on the landscape level.

• Steel and Composite Structures
• /
• v.33 no.1
• /
• pp.37-66
• /
• 2019

In cold-formed steel structures, such as trusses, wall frames and portal frames, the use of back-to-back built-up cold-formed stainless-steel lipped channels as compression members are becoming increasingly popular. The advantages of using stainless-steel as structural members are corrosion resistance and durability, compared with carbon steel. The AISI/ASCE Standard, SEI/ASCE-8-02 and AS/NZS do not include the design of stainless-steel built-up channels and very few experimental tests or finite element analyses have been reported in the literature for such back-to back cold-formed stainless-steel channels. Current guidance by the American Iron and Steel Institute (AISI) and the Australian and New Zealand (gAS/NZS) standards for built-up carbon steel sections only describe a modified slenderness approach, to consider the spacing of the intermediate fasteners. Thus, this paper presents a numerical investigation on the behavior of back-to-back cold-formed stainless-steel built-up lipped channels. Three different grades of stainless steel i.e., duplex EN1.4462, ferritic EN1.4003 and austenitic EN1.4404 have been considered. Effect of screw spacing on the axial strength of such built-up channels was investigated. As expected, most of the short and intermediate columns failed by either local-global or local-distortional buckling interactions, whereas the long columns, failed by global buckling. All three grades of stainless-steel stub columns failed by local buckling. A comprehensive parametric study was then carried out covering a wide range of slenderness and different cross-sectional geometries to assess the performance of the current design guidelines by AISI and AS/NZS. In total, 647 finite element models were analyzed. From the results of the parametric study, it was found that the AISI & AS/NZS are conservative by around 10 to 20% for cold-formed stainless-steel built-up lipped channels failed through overall buckling, irrespective of the stainless-steel grades. However, the AISI and AS/NZS can be un-conservative by around 6% for all three grades of stainless-steel built-up channels, which failed by local buckling.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.38 no.4
• /
• pp.80-87
• /
• 2015

The proliferation of the Internet and communication technologies and applications, besides the conventional retailers, has led to a new form of distribution channel, namely home sopping through the telephone, TV, catalog or the Internet. The conventional and new distribution channels have different transaction costs perceived by the consumers in the following perspectives: the accessibility to the product information, the traffic cost and the opportunity cost for the time to visit the store, the possibility of 'touch and feel' to test the quality of the product, the delivery time and the concern for the security for the personal information. Difference in the transaction costs between the distribution channels results in the different selling prices even for the same product. Moreover, distribution channels with different selling prices necessarily result in different business surpluses. In this paper, we study the multilateral bargaining strategy of a manufacturer who sells a product through multiple distribution channels with different transaction costs. We first derive the Nash equilibrium solutions for both simultaneous and sequential bargaining games. The numerical analyses for the Nash equilibrium solutions show that the optimal bargaining strategy of the manufacturer heavily depends not only on the degree of competition between the distribution channels but on the difference of the business surpluses of the distribution channels. First, it is shown that there can be four types of locally optimal bargaining strategies if we assume the market powers of the manufacturer over the distribution channels can be different. It is also shown that, among the four local optimal bargaining strategies, simultaneous bargaining with the distribution channels is the most preferred bargaining strategy for the manufacturer.