• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.3
• /
• pp.661-669
• /
• 2000

DS-CDMA downlink distinguishes actual user by orthogonal spreading codes ,but its orthogonality may be lost by the multiple access interference(MAI) caused by the multipath channel. Therefore in this paper, we proposed the single-user receiver, which use linear channel equalizer to eliminate the interference due to multipath channel and to recover orthogonality and then use code-matched filter to detect transmitted data. Unlike existing research, which mainly assumed ideal channel information, we use pilot channel assisted methods that is a kind of transmission of a parallel reference method to estimate the channel coefficients. Especially we use guard symbols which are inserted periodically to estimate channel coefficients exactly without interference from user signal. The results show that we accepted an approximately ideal channel information and achieved excellent performance improvement using proposed receiver compared with the conventional receiver especially user populations are high.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.8
• /
• pp.4227-4240
• /
• 2019

In this paper, we present our proposed magnetic induction based wireless communication system. The proposed system is designed to perform communication as well as distance measurement in underground environments. In order to improve the communication quality, we propose and implement the adaptive channel compensation technique. Based on the fact that the channel may be fast time-varying, we keep track of the channel status each time the data is received and accordingly compensate the channel coefficient for any change in the channel status. By using the proposed compensation technique, the developed platform can reliably communicate over distances of 10m while the packet error rate is being maintained under 5%. We also implement the distance measurement block that is useful for various applications that should promptly estimate the location of nearby nodes in communication. The distance between two nodes in communication is estimated by generating a table describing pairs of the magnetic signal strength and the corresponding distance. The experiment result shows that the platform can estimate the distance of a node located within 10m range with the measurement error less than 50cm.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.7
• /
• pp.19-27
• /
• 1997

This paper presents the performance analysis of MC-CDMA system in reverse links acquired through the computer simulation. For channel estimation which is essential component of mobile communications, a modified alpha algorithm is proposed to estimate the channel sate for MC-CDMA system. In order to update the channel estimator of each subchannel, the modified algorithm uses the final hard-decision value in the receiver.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.4
• /
• pp.318-324
• /
• 2013

For blind channel equalization, the reliability of signal estimate determines the convergence speed and steady-state performance of the equalizer. Therefore the nonlinear estimator and reference signal being used in signal estimate should be chosen appropriately. In this paper, to increase the reliability of the signal estimate, two errors were obtained by applying coarse signal points and dense signal points respectively to signal estimate, the relative reliabilities of two errors were calculated, then the equalizer was adapted deferentially utilizing the reliabilities. At this point, by applying two errors alternately, two modes of operation were smoothly combined. Through computer simulations the proposed method was confirmed to achieve fast transient state convergence and low steady-state error compared to traditional methods.

• Journal of Digital Convergence
• /
• v.12 no.12
• /
• pp.329-335
• /
• 2014

In this paper, to improve the performance of PB/MC-CDMA system, we have researched about the decision feedback channel estimation method using the pilot symbol with data symbol. The PB/MC-CDMA system is able to obtain the improved BER by frequency diversity gain and frequency domain equalizer in the frequency selective fading channel. However, when it is not the estimating of channel exactly, it is degrading the performance of BER in the system for occurred the interference among users. To improve the performane system in the multi-user environment the proposed system is using the decision feedback to estimate channel using the channel estimated value of the first stage and second stage. The proposed system is evaluated by computer simulation. The proposed system is not only able to improve the performance of BER by decreasing the interference to each user, but also the proposed system is possible to reduce number of pilot symbol to estimate the channel. Therefore, it confirmed the proposed system improves the performance than the conventional system.

• Journal of Communications and Networks
• /
• v.12 no.5
• /
• pp.475-479
• /
• 2010

The clipping value, defined as the log-likelihood ratio (LLR) in the case wherein all the list of candidates have the same binary value, is investigated, and an effective method to estimate it is presented for iterative tree search detection. The basic principle behind the method is that the clipping value of a channel bit is equal to the LLR of the maximum probability of correct decision of the bit to the corresponding probability of erroneous decision. In conjunction with multilevel bit mappings, the clipping value can be calculated with the parameters of the number of transmit antennas, $N_t$; number of bits per constellation point, $M_c$; and variance of the channel noise, $\sigma^2$, per real dimension in the Rayleigh fading channel. Analyses and simulations show that the bit error performance of the proposed method is better than that of the conventional fixed-value method.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.2059-2062
• /
• 2002

For detection of digitally modulated signals, the receiver must be provide with accurate carrier phase and symbol timing estimates. So far, tots of algorithms have been suggested for those purposes. In general, a interpolation filter with TED(Timing Error Detection) like Gardner algorithm is popularly used for symbol timing estimate of digital communication receiver. Apart from the performance point of view, a multiplicative operation of any interpolation filter limits the symbol rate of the system. Hence, we suggest a new symbol timing estimate algorithm for high speed burst-mode fixed wireless communication system and analyze its performance in the AWGN channel.

• Journal of electromagnetic engineering and science
• /
• v.6 no.4
• /
• pp.203-208
• /
• 2006

Channel estimation and data detection for OFDM systems over time- and frequency-selective channels are investigated. Relying on the complex exponential basis expansion channel model, a pilot-embedded channel estimation scheme with low computational complexity and spectral efficiency is proposed. A periodic pilot sequence is superimposed at a low power on information bearing sequence at the transmitter before modulation and transmission. The channel state information(CSI) can be estimated using the first-order statistics of the received data. In order to enhance the performance of channel estimation, we recover the transmitted data which can be exploited to estimate CSI iteratively. Simulation results show that the proposed method is suitable for doubly-selective channel estimation for the OFDM systems and the performance of the proposed method can be better than that of the Wiener filter method under some conditions. Through simulations, we also analyze the factors which can affect the system performances.

• ETRI Journal
• /
• v.37 no.3
• /
• pp.439-449
• /
• 2015

Human body communication (HBC) is being recognized as a new communication technology for mobile and wearable devices in a body area network (BAN). This paper presents co-channel interference experienced by HBC supporting the physical layer in the IEEE 802.15.6 BAN standard. To analyze the co-channel interference, a co-channel interference model is introduced, and space-domain and time-domain parameters representing an interference environment are generated using the co-channel interference model. A new signal-to-interference ratio (SIR) parameter depending on the peak amplitudes of the data signals causing co-channel interference is defined; co-channel interference can be easily analyzed and modelled using the newly defined SIR. The BER degradation model derived using the co-channel interference model and SIR in this paper can be effectively used to estimate the performance.

• Journal of Korea Multimedia Society
• /
• v.7 no.6
• /
• pp.781-790
• /
• 2004

This paper presents a fourth-order cumulants based iterative algorithm for blind channel equalization. It is robust with respect to the existence of heavy Gaussian noise in a channel and does not require the minimum phase characteristic of the channel. In this approach, the transmitted signals at the receiver are over-sampled to ensure the channel described by a full-column rank matrix. It changes a single-input/single-output (SISO) finite-impulse response (FIR) channel to a single-input/multi-output (SIMO) channel. Based on the properties of the fourth-order cumulants of the over-sampled channel outputs, the iterative algorithm is derived to estimate the deconvolution matrix which makes the overall transfer matrix transparent, i.e., it can be reduced to the identity matrix by simple reordering and scaling. Both a closed-form and a stochastic version of the proposed algorithm are tested with three-ray multi-path channels in simulation studies, and their performances are compared with a method based on conventional second-order cumulants. Relatively good results are achieved, even when the transmitted symbols are significantly corrupted with Gaussian noise.