• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.9
• /
• pp.69-76
• /
• 2018

The present study analyzed the effect of film hole position of 45 degree ribbed cooling channel on film cooling performance of gas turbine blades. We also investigated the influence of the ribs under the fixed blowing ratio. Three-dimensional numerical model was constructed and extensive simulation was conducted using the commercial code (Fluent ver. 17.0) under steady-state condition. Base on the simulation results, We investigated the cooling effectiveness, flow velocity, streamline, and pressure coefficient. Moreover, We analyzed the effect of cooling hole position on ejection of the secondary flow caused by the rib structure. From the results, It was found that internal flow of the cooling channel forms a vortex pair in the counterclockwise from the top side, and clockwise from the bottom side. For the channels with ribs, the vortex flow generated by the ribs caused a higher pressure difference near the hole outlet, resulting in at least 12% higher cooling effectiveness than the channel without ribs. Additionally, when the hole is located on the left side of the ribbed channel (Rib-Left), it can be found that the secondary flow generated by the ribs hits against wall surface near the hole to form a flow in the direction of the hole inclination angle. Therefore, It is considered that the region where the cooling gas discharged to the blade surface stays in the main flow boundary layer is wider than the other cases. In this case, The largest pressure coefficient difference was observed near the outlet of the hole, and as a result, the discharge of the cooling gas was accelerated and the cooling efficiency was slightly increased.

• Journal of Ginseng Research
• /
• v.31 no.2
• /
• pp.79-85
• /
• 2007

Compound K (CK) is a final metabolite of panaxadiol ginsenosides. Although panax ginseng is known to have anti-diabetic activity, the active ingredient is not yet fully identified. Therefore, it would be interesting to know whether and how CK has an anti-diabetic activity. First, insulin secretion-stimulating activity of CK was examined using RIN-m5F cell line and primary cultured islets. CK enhanced the insulin secretion in a concentration dependent manner. This effect, however, was almost completely abolished in the presence of diazoxide, $K^+$ channel opener, indicating that the insulin secretion-stimulating activity of CK is presumably due to blockade of ATP sensitive $K^+$ channel. In addition, effects of CK on gene expressions of hepatic enzymes (phosphoenolpyruvate carboxykinase[PEPCK], glucose-6-phos-phatase[G6Pase]) and on adipocyte differentiation in H4IIE and 3T3-Ll cells, respectively, were examined. CK suppressed the induction of PEPCK and G6Pase mRNA expressions under the dexamethasone/cAMP stimulation condition. CK also reduced the $PPAR-{\gamma}$ mRNA expression and triglyceride accumulation in a dose dependent manner as compared to the control. The present study suggests that CK deserves to examine whether it shows an anti-diabetic activity in animal and human studies.

• Journal of Korea Water Resources Association
• /
• v.39 no.2 s.163
• /
• pp.99-108
• /
• 2006

To describe the behavior of suspended-sediment particles in turbulent open-channel flows, the advection-diffusion equation or its simplified form has been used. Though this equation was derived upon several assumptions, only a few studies tried to evaluate the limit of the assumptions. The reason is that it is very difficult to measure turbulence in open-channel flows and to discriminate the velocities of water and sediment particles. The present study aims to measure the velocity profiles of water and sediment particles in open-channel flows by using PTV (Particle Tracking Velocimetry), a kind of PIV (Particle Image Velocimetry). The measured results showed that sediment particles moved slower than water tracers did in the outer region. In the present study, the amount of velocity-lag reached about $5\%$ of the mom flow velocity and the position of the maximum velocity-lag was $g/h\approx0.05\;(g^{+}=30\~50)$ The main cause of the velocity-lag of sediment particles seems that the sediment particles have larger density than water has. On the other hand, in the viscous sublayer, sediment particle has a larger velocity than water tracers. The reason of the inversion of velocity-lag may be due to the no-sleep condition of water at the solid boundaries.

• Geophysics and Geophysical Exploration
• /
• v.22 no.3
• /
• pp.116-131
• /
• 2019

In order to obtain high-quality high-resolution marine seismic data, the survey needs to be carried out at very low-sea condition. However, the survey is often performed with a slight wave, which degrades the quality of data. In this case, it is possible to improve the quality of seismic data by detecting the exact location of the sea bottom signal and eliminating the influence of waves or swells automatically during data processing. However, if noise is included or the sea bottom signal is weakened due to sea waves, sea bottom detection errors are likely to occur. In this study, we applied a method reducing such errors by estimating the sea bottom location, setting a narrow detection range and detecting the sea bottom location within this range. The expected location of the sea bottom was calculated using previously detected sea bottom locations for each channel of multi-channel data. The expected location calculated in each channel is also compared and verified with expected locations of other channels in a shot gather. As a result of applying this method to the noisy 8-channel high-resolution air-gun seismic data acquired off Yeosu, the errors in selecting the strong noise before sea bottom or the strong subsurface reflected signal after the sea bottom signal are remarkably reduced and it is possible to produce the high-quality seismic section with the correction of ~ 2.5 m swell effect.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.5B
• /
• pp.469-479
• /
• 2006

In order to investigate characteristics of the primary flow and the secondary currents in meandering channels, the laboratory experiments were conducted in S-curved channels with angle of bend, $150^{\circ}$, and sinuosity of 1.52. The experimental conditions was decided varying average depth and velocity. Under these experimental conditions, spatial variations of the secondary currents in multiple bends were observed. The experimental results revealed that the distribution of primary flow in straight section is symmetric without respect to the experimental condition and the maximum velocity line of the primary flow occurs along the shortest path in experimental channel, supporting the result of previous works. The secondary currents in second bend became more developed than those in first bend. Particularly, the outer bank cell developed distinctively and the secondary current intensity was low at the straight section and high at the bends, periodically. Also, the secondary current intensity at the bends was as twice to three times as that at the straight section, and has its maximum value at the second bend. The turbulent flow characteristics of meandering channel was investigated with turbulent intensity of the primary flow and Reynolds shear stress. It was observed that the turbulent intensity is increasing when the velocity deviation of the primary flow is large whereas Reynolds shear stress increases when both the velocity deviation of the primary flow and the secondary current are large.

• Korea-Australia Rheology Journal
• /
• v.12 no.3_4
• /
• pp.165-173
• /
• 2000

Three-dimensional numerical simulation of isothermal/nonisothermal coextrusion process of two immiscible polymers through a rectangular channel has been done using the finite element method. The encapsulation phenomenon with the less viscous layer encapsulating the more viscous layer was investigated with the generalized Newtonian fluids. The interface position around the symmetric plane obtained by numerical simulation nearly coincided with the one observed in experiments, but the degree of encapsulation was less than the one observed experimentally. Open boundary condition method was found to be applied to the simulation of nonisothermal coextrusion process, however, the results are not far from those using the fully developed boundary condition, because the temperature development along the downstream direction is very slow in the case of convection dominated flow. When the inlet velocity is increased, the interface profile does not change in isothermal flow, while it moves upward in nonisothermal situation. The degree of encapsulation decreases along the downstream direction in nonisothermal flow. When the inlet temperature increases compared to the wall temperature, the outlet interface moves downward and the degree of encapsulation increases. The difference of degree of encapsulation between the simulation and the experiments seems to arise from the viscoelastic effect of the materials. It was concluded that the nonisothermal effect alone does not explain the complex coextrusion process and the viscoelastic effect needs to be considered.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.7
• /
• pp.1108-1114
• /
• 2007

Twenty eight non-lactating and non-pregnant adult Serra da Estrela ewes, ranging in body condition score (BCS) from 1 to 4 were used to study the relationships between BCS, live weight (LW), body composition and fat partition. Ewes were slaughtered and their kidney knob and channel fat (KKCF), sternal fat (STF) and omental plus mesenteric fat (OMF) were separated and weighed. Left sides of carcasses as well as the respective lumbar joints were then dissected into muscle, bone and subcutaneous (SCF) and intermuscular fat (IMF). The relationship between LW and BCS was studied using data from 1,396 observations on 63 ewes from the same flock and it was found to be linear. Regression analysis was also used to describe the relationships among BCS and/or LW and weights (kg) and percentages in empty body weight (EBW) of dissected tissues. The prediction of weights and percentages in EBW of total fat (TF) and of all fat depots afforded by BCS was better than that provided by LW. Only the weight of muscle and the percentage of bone in the EBW were more efficiently predicted by LW than by BCS. IMF represented the largest fat depot with a BCS of 1 and 2, whereas SCF was the most important site of fat deposition with a BCS of 3 and 4. Allometric coefficients for each fat depot in TF suggest that the fat deposition order in ewes from this breed is: IMF, OMF, SCF and KKCF. Results demonstrate that BCS is a better predictor than LW of body reserves in this breed and that LJ is a suitable anatomical region to evaluate BCS.

• The Korean Journal of Physiology and Pharmacology
• /
• v.6 no.2
• /
• pp.93-99
• /
• 2002

Effects of oxidized low-density lipoprotein (ox-LDL), $1-{\alpha}-stearoyl-lysophosphatidylcholine$ (LPC), on intracellular $Ca^{2+}$ concentration were examined in mouse endothelial cells by measuring intracellular $Ca^{2+}$ concentration $([Ca^{2+}]_i)$ with fura 2-AM and reverse transcription-polymerase chain reaction (RT-PCR). LPC increased $[Ca^{2+}]_i$ under the condition of 1.5 mM $[Ca^{2+}]_o$ but did not show any effect under the nominally $Ca^{2+}-free$ condition. Even after the store depletion with $30{\mu}M$ 2,5-di-tert- butylhydroquinone (BHQ) or $30{\mu}M$ ATP, LPC could still increase the $[Ca^{2+}]_i$ under the condition of 1.5 mM $[Ca^{2+}]_o.$ The time required to increase [$Ca{2+}$]i (about 1 minute) was longer than that for ATP-induced $[Ca^{2+}]_i$ increase $(10{\sim}30\;seconds).$ LPC-induced $[Ca^{2+}]_i$ increase was completely blocked by $1{\mu}M\;La^{3+}.$ Transient receptor potential channel(trpc) 4 mRNA was detected with RT-PCR. From these results, we suggest that LPC increased $[Ca^{2+}]_i$ via the increase of $Ca^{2+}$ influx through the $Ca^{2+}$ routes which exist in the plasma membrane.

• Journal of Korea Water Resources Association
• /
• v.44 no.3
• /
• pp.189-198
• /
• 2011

The aim of this study is to compare k-$\varepsilon$ and k-$\omega$ closures under the condition of oscillatory layer flow at high Reynolds number. A one dimensional vertical model incorporated with flow momentum equations and turbulence models (k-$\varepsilon$ and k-$\omega$) is applied to the laboratory measurements in the turbulent oscillatory boundary layer. The numerical simulation reveals that both turbulence models calculate similar velocity profiles and turbulent kinetic energy (TKE). In addition, both deliver high accuracy under the condition of negligible spanwise pressure gradient. Therefore, it is recommended in this study to use k-$\varepsilon$ closure, of which numerical coefficients have been calibrated from many studies, for the cases of straight channel, estuary, and coastal environment where the spanwise pressure gradient is not significant.

• Journal of the Society of Naval Architects of Korea
• /
• v.33 no.1
• /
• pp.1-8
• /
• 1996

A potential-based panel method has been developed for numerical computation of wave resistance on a hybrid hydrofoil. Hybrid hydrofoil is composed of a main body, two struts and two hydrofoils. The main body, which is assumed to be an axisymmetric body for the present analysis, is normally used to support displacement of a body with its buoyancy. Normal dipoles and the sources are distributed on the body(main body, struts, hydrofoils) and the sources are distributed on the free surface. Linearized free surface and the radiation conditions are satisfied using the fourth order finite difference operator and the semi-linear pressure Kutta condition is used for the numerical computation of the hydrofoils. Poisson type free surface condition has been used for the numerical computation and hyperboloidal panel method has been used for better numerical accuracy. To verify this numeric method, model tests are performed in circulation water channel. From the comparison of experimental results with numeric ones, the present method can be used as a useful tool for the design of high speed vessels.