• The korean journal of orthodontics
• /
• v.28 no.6 s.71
• /
• pp.915-926
• /
• 1998

The cytoskeleton has been shown to form a network, connecting the extracelluar matrix via integrin with the nucleus and the cytoplasmic constituents of the cell. It is therefore assumed that the cytoskeleton may mediate signals generated by perturbations originating in the matrix. The purpose of this study is to examine the effect of cytoskeletal change on osteoblastic cell activities. The author cultured osteoblastic cells obtained from neonatal mouse calvaria. The cells were teated with cytochalasin B(CB) or colchicine (COL) at four concentrations for 3 hours and after another 24 hours the conditioned media was collected and assayed for prostaglandin $E_2\;(PGE_2)$, interleukin-6(IL-6), tumor necrosis factor-$\alpha$ (TNF-$\alpha$) and matrix metalloproteinase-1(MMP-1). In addition, the cytoskeletal protein actin were observed by immuno-fluorescence. The results were as follows: 1. The production of $PGE_2$ showed the tendency to be increased in CB-treated group. $PGE_2$ was increased in COL-treated group dose-dependantly, 2. IL-6 production, in CB-treated group, was increased, except at 1.0 ${\mu}g/ml$. IL-6 was induced in COL-treated group. 3. TNF-$\alpha$ production was increased in CB-treated group, except at 1.0 ${\mu}g/ml$, and in COL-treated group, that was increased. 4. The MMP-1 production was decreased in CB-treated soup and was not changed in COL-treated group, which could be selectively visualized by immunoblotting with monospecific antibody. 5. The cytoskeletal actin stress fibers were disappeared and the cells showed to be rounded in CB-treated group. These results indicated that there are a relationship between the cytoskeletal rearrangements and osteoblastic cell activities, especially in release of paracrine/autocrine factors, such as $PGE_2$, IL-6, and TNF-$\alpha$.

• Economic and Environmental Geology
• /
• v.17 no.4
• /
• pp.283-288
• /
• 1984

Projection method has been used in the phase equilibria study. The projection is made through the saturated phase on the smaller chemical system from larger system. This decreases the number of phases which are included in the larger chemical system. In multiple projection containing plagioclase as a projection phase, there is a difference in matrix calculation when plagioclase is treated as a single composite component and separately as an albite and anorthite. The matrix calculation is considered to be more usable and easier in multiple projection. The value of the A component in the AFM system, which is the smaller system projected from the larger one, is effected and varies according to the change in the An content in plagioclase that is examined as an example.

• Steel and Composite Structures
• /
• v.24 no.1
• /
• pp.53-63
• /
• 2017

The paper presents the simplified matrix stiffness method for analysis of composite and prestressed beams. The method is based on the previously developed "exact" analysis method that uses the mathematical theory of linear integral operators to derive all relations without any mathematical simplifications besides inevitable idealizations related to the material rheological properties. However, the method is limited since the closed-form solution can be found only for specific forms of the concrete creep function. In this paper, the authors proposed the simplified analysis method by introducing the assumption that the unknown deformations change linearly with the concrete creep function. Adopting this assumption, the nonhomogeneous integral system of equations of the "exact" method simplifies to the system of algebraic equations that can be easily solved. Therefore, the proposed method is more suitable for practical applications. Its high level of accuracy in comparison to the "exact" method is preserved, which is illustrated on the numerical example. Also, it is more accurate than the well-known EM method.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.8
• /
• pp.766-770
• /
• 2010

In this paper, we present an effective covariance tracking algorithm based on adaptive size changing of tracking window. Recent researches have advocated the use of a covariance matrix of object image features for tracking objects instead of the conventional histogram object models used in popular algorithms. But, according to the general covariance tracking algorithm, it can not deal with the scale changes of the moving objects. The scale of the moving object often changes in various tracking environment and the tracking window(or object kernel) has to be adapted accordingly. In addition, the covariance matrix of moving objects should be adaptively updated considering of the tracking window size. We provide a solution to this problem by segmenting the moving object from the background pixels of the tracking window. Therefore, we can improve the tracking performance of the covariance tracking method. Our several simulations prove the effectiveness of the proposed method.

• Structural Engineering and Mechanics
• /
• v.29 no.6
• /
• pp.659-671
• /
• 2008

A procedure to analyse the space frame structure fixed at base as well as resting on sliding bearing using total or absolute displacement in dynamic equation is developed. In the present method, the effect of ground acceleration is not considered as equivalent force. Instead, the ground acceleration is considered as a known value in the acceleration vector at degree of freedom corresponding to base of the structure when the structure is in non-sliding phase. When the structure is in sliding phase, only a force equal to the maximum frictional resistance is applied at base. Also, in this method, the stiffness matrix, mass matrix and the damping matrix will not change when the structure enters from one phase to another. The results obtained from the present method using absolute displacement approach are compared with the results obtained from the analysis of structure using relative displacement approach. The applicability of the analysis is also demonstrated to obtain the response of the structure resting on sliding bearing with restoring force device.

• Korean Membrane Journal
• /
• v.6 no.1
• /
• pp.37-43
• /
• 2004

Comb-type graft hydrogels composed of alginate and poly(N-isopropylacrylamide) (PNIPAAm) were prepared to manifest rapid temperature and pH sensitivity. To appear the electro-sensitivity, the polyaniline, conducting polymer, was added into the matrix. The swelling kinetics and ratios were compared under the various compositions of polyaniline. The swelling behaviors revealed that conducting polymer/hydrogel composites could control the swelling ratio and kinetics. The addition of polyaniline in the matrix improved the thermal stability in comparison with that of the hydrogel without polyaniline. In temperature sensitivity, the adding the polyaniline into the matrix decreased the degree of change in the swelling ratio. The swelling ratios continuously increased with increasing pH values. The drug release rate from the hydrogel increased with the adding the polyaniline and the applying the direct voltage to the hydrogels.

• Structural Engineering and Mechanics
• /
• v.29 no.5
• /
• pp.531-550
• /
• 2008

This paper adopts the numerical assembly method (NAM) to determine the exact solutions of natural frequencies and mode shapes of a multi-span and multi-step beam carrying a number of various concentrated elements including point masses, rotary inertias, linear springs, rotational springs and springmass systems. First, the coefficient matrix for an intermediate station with various concentrated elements, cross-section change and/or pinned support and the ones for the left-end and right-end supports of a beam are derived. Next, the overall coefficient matrix for the entire beam is obtained using the numerical assembly technique of the conventional finite element method (FEM). Finally, the exact solutions for the natural frequencies of the vibrating system are determined by equating the determinant of the last overall coefficient matrix to zero and the associated mode shapes are obtained by substituting the corresponding values of integration constants into the associated eigenfunctions.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.41 no.5
• /
• pp.459-467
• /
• 1992

This paper presents a new algorithm for the countermeasure to alleviate the line overloads due to contingency without shedding loads in a power system. This method for relieving the line overloads by line switching is based on obtaining the kine outage distribution factors-the linear sensitivity factors, which give the amount of change in the power flow of each line due to the removal of a line in a power system. There factors are made up of the elements of sparse bus reactance matrix and brach reactances. In this paper a fast algorithm and program is presented for obtaining only the required bus reactance elements which corresponds to a non-zero elements of bus admittance matrix, and elements of columns which correspond to two terminal buses of the overloaded(monitored) line. The proposed algorithm has been validated in tests on a 6-bus and the 30-bus test system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.1
• /
• pp.717-724
• /
• 2016

This paper proposes a change detection method based on the covariance matrices of color and edge gradient in a color video. The YCbCr color format was used instead of RGB. The color covariance matrix was calculated from the CbCr-channels and the edge gradient covariance matrix was calculated from the Y-channels. The covariance matrices were effectively calculated at each pixel by calculating the sum, squared sum, and sum of two values' multiplication of a rectangle area using the integral images from a background image. The background image was updated by a running the average between the background image and a current frame. The change areas in a current frame image against the background were detected using the Mahalanobis distance, which is a measure of the statistical distance using covariance matrices. The experimental results of an expressway color video showed that the proposed approach can effectively detect change regions for color and edge gradients against the background.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.6
• /
• pp.675-689
• /
• 2019

Development of smart construction materials with both self-strain and self-damage sensing capacities is still difficult because of little information about the self-damage sensing source. Herein, we investigate the effects of the matrix strength, fiber geometry, and fiber content on the electrical resistivity of steel-fiber-reinforced cement composites by multi-fiber pullout testing combined with electrical resistivity measurements. The results reveal that the electrical resistivity of steel-fiber-reinforced cement composites clearly decreased during fiber-matrix debonding. A higher fiber-matrix interfacial bonding generally leads to a higher reduction in the electrical resistivity of the composite during fiber debonding due to the change in high electrical resistivity phase at the fiber-matrix interface. Higher matrix strengths, brass-coated steel fibers, and deformed steel fibers generally produced higher interfacial bond strengths and, consequently, a greater reduction in electrical resistivity during fiber debonding.