Browse > Article
http://dx.doi.org/10.12989/sem.2008.29.6.659

An absolute displacement approach for modeling of sliding structures  

Krishnamoorthy, A. (Department of Civil Engineering, Manipal Institute of Technology)
Publication Information
Structural Engineering and Mechanics / v.29, no.6, 2008 , pp. 659-671 More about this Journal
Abstract
A procedure to analyse the space frame structure fixed at base as well as resting on sliding bearing using total or absolute displacement in dynamic equation is developed. In the present method, the effect of ground acceleration is not considered as equivalent force. Instead, the ground acceleration is considered as a known value in the acceleration vector at degree of freedom corresponding to base of the structure when the structure is in non-sliding phase. When the structure is in sliding phase, only a force equal to the maximum frictional resistance is applied at base. Also, in this method, the stiffness matrix, mass matrix and the damping matrix will not change when the structure enters from one phase to another. The results obtained from the present method using absolute displacement approach are compared with the results obtained from the analysis of structure using relative displacement approach. The applicability of the analysis is also demonstrated to obtain the response of the structure resting on sliding bearing with restoring force device.
Keywords
absolute displacement; relative displacement; sliding bearing; harmonic ground acceleration; El Cenrto earthquake; space frame structure;
Citations & Related Records

Times Cited By Web Of Science : 0  (Related Records In Web of Science)
Times Cited By SCOPUS : 0
연도 인용수 순위
  • Reference
1 Mostaghel, N. and Tanbakuchi, J. (1983), "Response of sliding structures to earthquake support motion", Earthq. Eng. Struct. Dyn., 11, 729-748   DOI
2 Yang, Y.B., Lee, T.Y. and Tsai, I.C. (1990), "Response of multi-degree-of-freedom structures with sliding supports", Earthq. Eng. Struct. Dyn., 19, 739-752   DOI
3 Zayas, V.A., Low, S.S. and Mahin, S.A. (1990), "A simple pendulum technique for achieving seismic isolation", Earthq. Spectra, 6, 317-333   DOI
4 Shakib, H. and Fuladgar, A. (2003), "Response of pure-friction sliding structures to three components of earthquake excitation", Comput. Struct., 81, 189-196   DOI   ScienceOn
5 Paz, M. (1991), Structural Dynamics - Theory and Computation, Van Nostrand Reinhold, New York
6 Pranesh, M. and Ravi, S. (2000), "VFPI: An Isolation device for aseismic design", Earthq. Eng. Struct. Dyn., 29, 603-627   DOI
7 Calio, I., Massimo, M. and Francesco (2003), "Seismic response of multi-storey buildings base-isolated by friction devices with restoring properties", Comput. Struct., 81, 2589-2599   DOI   ScienceOn
8 Jangid, R.S. (2000), "Stochastic seismic response of structures isolated by rolling rods", Eng. Struct., 22, 937-946   DOI   ScienceOn
9 Krishnamoorthy, A. and Saumil, P. (2005), "In-plane response of a symmetric space frame with sliding supports", Int. J. Appl. Sci. Eng., 3, 1-11
10 Bhasker, P. and Jangid, R.S. (2001), "Experimental study of base - isolated structures", J. Earthq. Technol., ISET, 38(1), 1-15
11 Jangid, R.S. and Londhe, Y.B. (1998), "Effectiveness of elliptical rolling rods for base isolation", J. Struct. Eng., ASCE, 124, 469-472   DOI   ScienceOn
12 Westermo, B. and Udwadia, F. (1983), "Periodic response of a sliding oscillator system to harmonic excitation", Earthq. Eng. Struct. Dyn., 11, 135-146   DOI
13 Mostaghel, N., Hejazi, M. and Tanbakuchi, J. (1983), "Response of sliding structures to harmonic support motion", Earthq. Eng. Struct. Dyn, 11, 355-366   DOI
14 Qamaruddin, M., Arya, A.S. and Chandra, B. (1986), "Seismic response of brick buildings with sliding substructures", J. Struct. Eng., ASCE, 112, 558-572   DOI   ScienceOn
15 Vafai, A., Hamidi, M. and Ahmadi. (2001), "Numerical modeling of MDOF structures with sliding supports using rigid-plastic link", Earthq. Eng. Struct. Dyn., 30, 27-42   DOI