• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.591-594
• /
• 2004

The directivity of the sound pressure increases the sensitivity of the incoming sound from specific directions. The directivity measurement of the sound pressure is usually done in an anechoic room using a steping motor. In this paper a replaceable anechoic chamber was designed for the acoustic directivity pattern measurement. Electrical equipments were interfaced with a PC for experiment automatic control. Some comparative results are shown in the result.

• 한국추진공학회지
• /
• 제20권3호
• /
• pp.103-110
• /
• 2016

유동 제어 시스템에 적용을 위한 디스크형 유체 소자 밸브의 성능해석 알고리즘을 수립하고 설계 변수들에 대한 민감도 분석을 진행하였다. 유입 유량 발생에 따른 챔버의 압력 변화와 디스크 거동 변화를 예측 하였고 설계 변수들의 민감도 분석을 위해 Scattering plot 기법을 활용하였다. 민감도 분석결과 유동 마하수에 가장 큰 민감도는 갖는 변수는 노즐 출구이며 밸브 응답 시간과 노즐 출구 모두에서 큰 민감도를 갖는 변수는 유입 유량임을 확인하였다.

• Bulletin of the Korean Chemical Society
• /
• 제33권4호
• /
• pp.1297-1302
• /
• 2012

The interaction between carbon monoxide (CO) and a cobalt-salen complex (Co(salen)) was studied and applied to detect CO. The metal complex doped PEDOT:PSS film exhibited good sensitivity to CO and differentiate CO from other gases. The response of the composite to CO was reversible (RSD < 5%) change in resistance upon removal of CO gas from the test chamber. The effects of adding Co(salen) in the probe film on the response of the sensor were investigated using AFM, XPS, and FT-IR spectroscopy. The sensitivity of the sensor increased as the Co(salen) concentration enhanced as it increased from 0.0 to 1.5 wt. %, where the highest sensitivity ($%{\Delta}R/R_o$) of $-25.0{\pm}0.05%$ was achieved with 1.0 wt. % Co(salen). The sensor containing probe exhibited a linear response ($R^2$ = 0.983) in the range of 0.5 to 10.0% CO (v/v) $N_2$, and the detection limit was 1.74% CO (v/v) in $N_2$.

• 한국전기전자재료학회논문지
• /
• 제29권5호
• /
• pp.312-316
• /
• 2016

In this study, we fabricated $NO_x$ gas sensor by using multi-walled carbon nanotubes(MWCNT)/zinc oxide(ZnO) composite film. Carbon nanotubes (CNTs) have good electronic, chemical-stability, and sensitivity characteristics. And zinc oxide (ZnO) is a wide band gap and large exciton binding energy semiconductor. In particular, gas sensors require characteristics such as high speed, sensitivity, and selectivity. The fabricated gas sensor was used to detect $NO_x$ gas for different values of the $NO_x$ gas concentrations. The gas sensor that absorbed$NO_x$ gas molecules showed a increasing in resistance. The sensitivity of the gas sensor was increased by increasing the gas concentrations. Additionally, while changing the temperature inside the chamber for the MWCNT/ZnO composite film gas sensor, we obtained the sensitivity. And the comparison analysis to ZnO film gas sensor for detecting $NO_x$ gas. From the experiment result, we confirmed improvement of $NO_x$ gas detection characteristics using the MWCNT/ZnO composite film.

• The Plant Pathology Journal
• /
• 제16권3호
• /
• pp.130-136
• /
• 2000

Differences in physiological and biochemical responses between sensitive and tolerant rice cultivars to ozone were investigated to develop reliable indications of early ozone damage. Three Korean local rice cultivars -sen-sitive cultivar Dongjin (DJ), moderately tolerant cultivar Hwayeong (HY) and tolerant cultivar Ilmee (IM) were exposed to ozone at the concentrations of 100 nl $\textrm{l}^{-1}$ or 200 nl $\textrm{l}^{-1}$ , 8 h per day for 10 days in a controlled-environment fumigation chamber. The rice cultivars seemed to be endurable to ozone stress at the concentration of 100 nl $\textrm{l}^{-1}$ which is frequently monitored during the growing season in summer. However, severe damage was induced and differential sensitivity was clearly noted among the rice cultivars at the higher ozone concentration. Activation of the glutathion (GR) -ascorbate peroxidase (APX) cycle was likely to be responsible for protection of rice plants against ozone exposure, relating difference in sensitivity of rice cultivars to ozone. Photosynthetic activity appeared to be one of sensitive responses, for which chlorophyll fluorescence and leaf greenness can together provide a very reliable index, a degree of photosynthetic damages by ozone. Formation of malondialdehyde (MDA) was also considered as an indication that can differentiate cultivars sensitivity to ozone. However, the changes in polyamines and total phenolics were not consistent with exposed ozone concentrations and/or ozone sensitivity of the cultivars. The behavior of polyamines and phenolics in the damaged plants at high ozone levels could be interpreted as an indication of ozone injury rather than activation of additional protection mechanisms scavenging active oxygen species formed by ozone. Several responses triggered by ozone could explain the differential sensitivity of the rice cultivars and be used as reliable indications of relative ozone damage to rice plant.

• 한국전기전자재료학회논문지
• /
• 제31권7호
• /
• pp.521-526
• /
• 2018

In particular, gas sensors require characteristics such as high speed, sensitivity, and selectivity. In this study, we fabricated a $NO_X$ gas sensor by using a multi-walled carbon nanotube (MWCNT)/zinc oxide (ZnO) composite film. The fabricated MWCNT/ZnO gas sensor was then treated by a $450^{\circ}C$ temperature process to increase its detection sensitivity for NOx gas. We compared the detection characteristics of a ZnO film gas sensor, MWCNT film gas sensor, and the MWCNT/ZnO composited film gas sensor with and without the heat-treatment process. The fabricated gas sensors were used to detect $NO_X$ gas at different concentrations. The gas sensor absorbed $NO_X$ gas molecules, exhibiting increased sensitivity. The sensitivity of the gas sensor was increased by increasing the gas concentration. Additionally, while changing the temperature inside the chamber for the MWCNT/ZnO composite film gas sensor, we obtained its sensitivity for detecting $NO_X$ gas. Compared with ZnO, the MWCNT film gas sensor is excellent for detecting $NO_X$ gas. From the experimental results, we confirmed the enhanced gas sensor sensing mechanism. The increased effect by electronic interaction between the MWCNT and ZnO films contributes to the improved sensor performance.

• 한국산림과학회지
• /
• 제90권1호
• /
• pp.10-18
• /
• 2001

오존 환경에 클론간 감수성을 비교하기 위하여 미류나무(Populus deltoides Marsh.) 10클론을 walk-in type인 4개의 chamber에 대조구, 50ppb, 100ppb, 150ppb 등 4가지 처리로 하루 8시간씩 21일간 계속하여 노출한 후 조기 낙엽율과 잎의 가시적 피해율을 조사하였다. 조기 낙엽율은 처리전과 비교할 때 저농도에서 고농도 순으로 처리농도에 따라 점진적으로 증가하여 150ppb 처리구에서는 50% 이상의 높은 낙엽율을 보였다. 잎의 가시적 피해는 대조구와 50ppb 처리구에서는 나타나지 않았으나, 100ppb 처리구에서는 피해잎 출현율(LA)은 17.3%, 피해면적(AA)은 6.5%로 본당 전체 피해율(LAA)은 1.6%로 나타났고, l50ppb 처리구에서는 피해잎 출현율 34.1%, 피해면적 17.5%로 전체 피해율 7.4%를 보였다. 잎의 가시적인 피해현상이 나타난 100ppb와 150ppb 처리구에서는 클론간에 피해의 차이를 보여 수종내 클론간의 감수성 차이를 확인할 수 있었다.

• 한국항공우주학회지
• /
• 제35권9호
• /
• pp.805-815
• /
• 2007

단일추력의 정상 작동 상태의 액체 로켓 엔진 시스템 모듈화 프로그램을 작성하기 위한 선행 연구로 엔진 주요 구성품들에 대한 성능설계 프로그램을 작성하였다. 주요 구성품으로는 추력실, 원심형 펌프, 충동형 터빈, 재생 냉각 채널 등이 고려되었다. 복잡성을 피하기 위하여 열역학적 관계식 및 비점성 이론을 바탕으로 한 여러가지 관계식들과 간략한 수학적 모델을 사용하였다. 본 논문에서는 도출된 결과를 정성적으로 살펴보고, 주요 설계 파라미터를 바꿔가면서 구성품의 작동특성 변화에 대한 경향성을 검토함으로써 일반적인 구성품 설계 이론에 부합하는가를 확인하였다.

• Nuclear Engineering and Technology
• /
• 제49권3호
• /
• pp.504-516
• /
• 2017

The Jordan Research and Training Reactor (JRTR) is the first research reactor in Jordan, the commissioning of which is ongoing. The reactor is a 5-MWth, open-pool type, light-water-moderated, and cooled reactor with a heavy water reflector system. The neutron measurement system (NMS) applied to the JRTR employs a wide-range fission chamber that can cover from source range to power range. A high-sensitivity boron trifluoride counter was added to obtain more accurate measurements of the neutron signals and to calibrate the log power signals; the NMS has a major role in the entire commissioning stage. However, few case studies exist concerning the application of the NMS to a research reactor. This study introduces the features of the NMS and the boron trifluoride counter in the JRTR and shares valuable experiences from lessons learned from the system installation to its early commissioning. In particular, the background noise relative to the signal-to-noise ratio and the NMS signal interlock are elaborated. The results of the count rates with the neutron source and the effects of the discriminator threshold are summarized.

• 센서학회지
• /
• 제28권1호
• /
• pp.58-63
• /
• 2019

This research aims at designing a diaphragm made of SUS316L stainless steel for ultra high pressure sensors and evaluating its performance with a PZT driven deformation tester instead of high pressure chamber testing up to 100 MPa. Finite element method analysis indicates that the optimum thickness of a flat diaphragm is 1.5 mm not only to secure safety of sensors up to 100 MPa but also to enhance displacement measuring sensitivity. For this thickness, the maximum displacement at the center of the diaphragm is $5.3{\mu}m$. The PZT actuator must offer a force of 1,669 N to create a pressure of 100 MPa at the diaphragm surface in order to obtain a displacement of $5.3{\mu}m$. The performance evaluation by the PZT driven tester demonstrates nearly the same results as the same results as the sensors tested in the ultra high pressure chamber.