• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계학술대회 논문집 초전도 자성체
• /
• pp.55-58
• /
• 2002

PIT method which is used at fabricating Bi-2223/Ag HTS wire includes a drawing process, conventional deformation method. Drawing of meta1(Ag) and ceramic (BiSrCaCuO) composite is also difficult and significant for uniform deformation. In this paper, parameters of uniform deformation was studied at Bi-2223/ Ag multifilamentary HTS wire. Powder and rod as a starting precursor was compared at 55 filament and 54 filament Bi-2223/Ag HTS wire, respectively. Micro-hardness and area COV of the filaments was also evaluated when the diameters were decreased through drawing operations.

• 한국재료학회지
• /
• 제17권4호
• /
• pp.185-191
• /
• 2007

The purpose of this study is to evaluate the thin fihn dielectric made of hybrid sol, which consist of barium titanate powder, polymeric sol and other polymers. This sol will be used dielectric applied to small, thin electric passive components such as MLCC(Multi Layer Ceramic Condenser), resister, inductor. This sol is composed of mixed fine barium titanate powder and polymeric sol including Ba, Ti-precursor, solvent, chelating agent, chemical reaction catalyst, the additive sols to improve fired densification and temperature reliability. First at all, we mixed hybrid sol to be dispersed and be stabilized by ball milling for 24hrs. By spin coating method, we makes thin film dielectric on the convectional green sheet for MLCC. After heat treatments, we analyzes the structure morphology, physical, electrical properties and X5R Temperature properties.

• 대한전기학회논문지
• /
• 제45권2호
• /
• pp.235-241
• /
• 1996

In this paper dielectric and electrostrictive strain properties of (1-y-x)Pb(Mg$_{1/3}$Nb$_{2/3}$)O$_{3}$-PbTiO$_{3}$$-yPbTiO_{3}-xSrTiO_{3}[(1-y-x)PMN-yPT-xST]$ ceramics fabricated by using columbite precursor method have been investigated with the substitution of SrTiO$_{3}$(ST). Dielectric constant of the specimens increased with the increase of ST content up to 5[m/o] and decreased with further substitution of ST. And the pyrochlore phase decreased with the increase of ST content up to 5[m/o] in XRD analysis. The elimination of the pyrochlore phase improved dielectric constants. The electrostrictive strains generated by AC electric field have the highest value at 5[m/o] SrTiO$_{3}$ addition and the hysteresis of strain ranged from 12 to 20[%]. The electrostrictive strain at various temperature investigated in the temperature range of $-50[^{\circ}C]~74[^{\circ}C].$ In higher temperature than phase transition region, it showed paraelectric property which shows very small hystersis.

• The Korean Journal of Ceramics
• /
• 제6권4호
• /
• pp.359-363
• /
• 2000

Reduced nicotinamide adenine dinucleotide (NADH) was encapsulated in transparent porous sol-gel silicate gels using by different organoalkoxysilane precursor. Characteristics optical absorption and fluorescence of NADH in the gels were examined with depending on NADH concentration and compared. Optical absorption in the aminopropyltrimethoxysilane (APTMS) gel is highest and remains constant during aging the gel. Thus, it is found that NADH in the APTMS gel is most stable and activated. On the other hand, methyltriethoxysilane (MTES) gel presents the lowest optical absorption diminishing with aging the gel. Measurable increase of fluorescence with raising the NADH concentration is observed except for the APTMS gel due to its solubility in the buffer during fluorescence measurement.

• 한국세라믹학회지
• /
• 제44권12호
• /
• pp.740-746
• /
• 2007

The potential candidates for IT-SOFCs cathode materials, $Ba_{0.5}Sr_{0.5}Co_{0.8}Fe_{0.2}O_{3-{\delta}}$ (BSCF) and $La_{0.6}Ba_{0.4}Co_{0.2}Fe_{0.8}O_{3-{\delta}}$ (LBCF) powders, were synthesized by a EDTA-citrate combined method from $Sr(NO_3)_2$, $Ba(NO_3)_2$, $La(NO_3)_3{\cdot}6H_2O$, $Co(NO_3)_2{\cdot}6H_2O$, $Fe(NO_3)_3{\cdot}9H_2O$, citric acid and $EDTA-NH_3$. The cathode performance of symmetrical electrochemical cells consisting of BSCF-GDC or LBCF-GDC composite electrodes and a GDC electrolyte was investigated using by AC impedance spectroscopy at the temperature range of 500 to $700^{\circ}C$. It was found that a single phase perovskite could be successfully synthesized when the precursor is heated at $850^{\circ}C$ for 2 h. Due to thermal expansion mismatch between BSCF and GDC, the composite cathodes with lower GDC content than 45 wt% were peeled off from the GDC electrolyte and their electrode polarization resistance was estimated to be high. The thermal expansion coefficient of BSCF-GDC composites was decreased with increasing the GDC content and the electrode peeling off did not occur in BSCF-45 and 55 wt% GDC composites. BSCF-45 wt% GDC composite electrode showed the lowest area specific resistances (ASR) of 0.15 and $0.04{\Omega}{\cdot}cm^2$ at 600 and $700^{\circ}C$, respectively. On the other hand, LBCF-GDC composite cathodes showed higher ASR than the BSCF-45 and 55 wt% GDC and their cathode performance were decreased with the GDC content.

• 공업화학
• /
• 제18권6호
• /
• pp.568-574
• /
• 2007

투명결정화 유리의 전구체로서 균열이 없는 $Li_2O1{\cdot}7Al_2O_3{\cdot}8.6SiO_2$ 조성인 다공성 괴상 겔을 formamide를 첨가한 알콕시드 용액으로부터 sol-gel방법으로 합성하였다. 겔 합성에서 겔화 활성화 에너지, 비표면적, 습윤겔의 완전 탈수에 필요한 온도, 기공의 부피 및 기공크기와 분포를 측정하였고, 겔의 결정화온도를 검토하고자 시차열분석을 실시하였다. 겔화의 활성화에너지는 가수분해에 필요한 물의 첨가량에 따라 13~14 kcal/mol 범위를 나타내고, 물의 첨가량이 가수분해시 필요한 이론량의 3배 이상일 경우, $70{\sim}75^{\circ}C$, 건조속도 0.1~0.3 %/h에서는 겔의 균열을 방지할 수 있어 안정한 괴상 겔을 제조할 수 있었다. $180^{\circ}C$에서 건조한 겔체는 비표면적, 기공부피 및 기공크기분포는 $239.40m^2/g$, 0.001~0.03 mL/g 그리고 1~122 nm 반지름의 미세구조로 된 투명 겔체로서 다공질 물질임이 확인되었고, 건조겔의 시차열분석 결과 $800^{\circ}C$ 부근에서 1차 발열피크, $980^{\circ}C$ 부근에서가 2차 발열피크가 확인되어 결정화가 일어남을 알 수 있었다.

• 한국세라믹학회지
• /
• 제39권9호
• /
• pp.884-889
• /
• 2002

나노 결정질 $ZrO_2$ 박막을 제조하여 박막의 표면에서 인산칼슘을 유도하는 능력을 편가하기 위하여, 지르코늄 나프테네이트를 출발물질로 사용하고 화학적 용액법을 이용하여, $ZrO_2/Si$ 구조를 제작하였다. 코팅용액을 (100)Si 기판 위에 스핀코팅한 후, 500$^{\circ}C$에서 10분간 전열처리와 800$^{\circ}C$에서 30분간 최종열처리를 행하였고, 모든 열처리는 공기분위기에서 실시하였다. X-ray diffraction analysis를 이용하여 열처리된 박막의 결정화도를 조사하였고, 표면의 미세구조와 표면 거칠기를 field emission-scanning electron microscope와 atomic force microscope를 이용하여 관찰하였다. 열처리 후의 박막은 표면에 미세한 $ZrO_2$ 나노 결정이 생성되어 있었으며, 박막의 계면은 매우 균질 하였다. 유사생채용액에 1일 및 5일간 침적된 샘플의 표면위에 형성된 인산칼슘을 energy dispersive X-ray spectrometer를 이용하여 관찰하였고, fourier transform infrared spectroscopy를 이용하여 인산칼슘에 카본이 치환되어 있음을 확인하였다.

• 한국세라믹학회지
• /
• 제41권12호
• /
• pp.929-932
• /
• 2004

페로브스카이트 단일상의 PMN 계 복합화합물을 제조하기 위하여 일반적으로 소량의 MgO가 과잉으로 사용되며, 잉여 MgO는 주로 입내에 석출되며 소결을 저해하는 것으로 알려져 있다. 본 연구에서는 MgO 대신 $(MgCO_3)_4{\cdot}Mg(OH)_2{\cdot}5H_{2}O$을 사용하여 고상법으로 제조한 PMN-PT-BT(PBT) 전구체 분말을 $500^{\circ}C/1h$에서 열처리한 후, MgO 졸로 표면 개질하여, 과잉의 MgO가 소결 및 물성에 미치는 영향을 조사하였다. 소량의 MgO 졸($0.5{\sim}1.0wt\%$)은 $1000^{\circ}C$ 이하의 온도에서 소결을 크게 촉진시켰다. $0.5wt\%$의 졸이 사용된 PBT 분말은 $900^{\circ}C/2h$ 소결로 소결밀도 $7.62g/cm^3$, 유전율 14800, 유전손실 $1.1\%$를 나타내었으며, 이는 PBT의 $1000^{\circ}C/2h$ 소결체의 물성과 흡사하였다. 또한 MgO 졸로 첨가된 과잉의 MgO는 삼중점과 입계에 주로 석출되어 입성장을 제어함을 알 수 있었다.

• 한국세라믹학회지
• /
• 제33권4호
• /
• pp.391-398
• /
• 1996

PMN계에서 유전적 성질에 관한 연구들은 광범위하게 이루어져 왔으나 전계인가 변위특성에 관한 폭넓은 연구는 매우 드물다. 본 연구에서는 완화형 강유전체의 가장 대표적인 PMN계에서 PT의 함량 및 측정 온도의 변화에 따른 유전적 성질 및 전계인가 변위특성을 광범위하게 조사하는 것을 목표로 하고 있다. 전형적인 columbite precur-sor법에 의해 분말을 준비하고 고상소결방법에 의하여 모든 시편을 제조하였다. PT의 함량이 증가하면서 직선적으로 (T$\varepsilon$max)가 증가하였으며 유전율은 13000~22000 사이의 값을 보였다. 유전율의 온도 의존성은 PMN의 경우 전형적인 완화형 강유전체의 유전 특성을 보이지만 PT의 함량이 증가될수록 보통 강유전체의 sharp한 거동을 보였다. 전계인가 변위특성에서는 단순히 유전율이 최대가 되는 온도에서 발생 strain이 최대가 되는 것은 아니며 tetragonal-cubic의 phase transition에서는 strain의 증가가 없고 rhombohedral에서 tetragonal 혹은 rhombohed-ral에서 cubic으로의 상전이에서만 strain이 크게 나타남을 알 수 있었다.

• 한국세라믹학회지
• /
• 제42권8호
• /
• pp.561-566
• /
• 2005

For the homogeneous dispersion of $ZrO_2$ particles in $Al_2O_3/ZrO_2$ceramics, Zr-precusors were mixed with oxide $Al_2O_3$powders by chemical routes such as partial precipitation or partial polymerization of Zr-nitrate solutions. In case of the mechanical mixing of ultrafine $Al_2O_3$ and $ZrO_2$ oxide powders, relatively homogeneous dispersion was difficult to achieve so that the particle size and distributions of $ZrO_2$ were relatively inhomogeneous after sintering at high temperature. But when the Zr-Y-hydroxide were co-precipitated to ultrafine $Al_2O_3$ oxide powders followed by calcinations, homogeneous dispersion of nano-sized $ZrO_2$ particles in $Al_2O_3/ZrO_2$ composite ceramics were obtained. But because of the coalescence of dispersed $ZrO_2$ particles, dispersed $ZrO_2$ was grown up to more than 0.2${mu}m$ (200 nm) when sintered at the temperature of higher than $1500^{\circ}C$ But when the sintering temperature was kept to lower than $1400^{\circ}C$ by using nano-sized $\alpha-alumina$, the particle size of dispersed $ZrO_2$ could be sustained below 0.1 ${\mu}m$. But the coalescence of dispersed $ZrO_2$ between $Al_2O_3$ particles could not be avoided so that the mechanical properties were not enhanced contrary to the expectations. So Zr-polyester precursors were precipitated and coated to the surface of ultrafine $\alpha-alumina$ powders by the polymerization of Ethylene Glycol with Citric Acid and Zirconium Nitrate. By this dispersion much more uniform dispersion of $ZrO_2$ was achieved at $1450\~1600^{\circ}C$ of sintering temperature ranges. And due to especially discrete dispersion of $ZrO_2$ between $Al_2O_3$ particles, their mechanical strength was more enhanced than mechanical mixing or hydroxide precipitation methods.