• 한국세라믹학회지
• /
• 제51권4호
• /
• pp.260-264
• /
• 2014

We developed a novel double dopant bismuth oxide system with Tb and W. When Tb was doped as a single dopant, a Tb dopant concentration more than 20 mol% was required to stabilize bismuth oxides with a high conductivity cubic structure. High temperature XRD analysis of 25 mol% Tb-doped bismuth oxide (25TSB) confirmed that the cubic structure of 25TSB was retained from room temperature to $700^{\circ}C$ with increase in the lattice parameter. On the other hand, we achieved the stabilization of high temperature cubic phase with a total dopant concentration as low as ~12 mol% with 8 mol% Tb and 4 mol% W double dopants (8T4WSB). Moreover, the measured ionic conductivity of 10T5WSB was much higher than 25TSB, thus demonstrating the feasibility of the double dopant strategy to develop stabilized bismuth oxide systems with higher oxygen ion conductivity for the application of SOFC electrolytes at reduced temperature. In addition, we investigated the long-term stability of TSB and TWSB electrolytes.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.27-32
• /
• 2006

The present status and prospects for further development of thin-film electroluminescent (TFEL) devices using oxide phosphors are described. High-luminance oxide TFEL devices have been recently developed using a new combinatorial deposition technique featuring rf magnetron sputtering with a subdivided powder target. In addition, new flexible oxide TFEL devices have been fabricated on an oxide ceramic sheet and operated stably in air above $200^{\circ}C$.

• 한국결정성장학회지
• /
• 제29권6호
• /
• pp.372-378
• /
• 2019

산화구리를 함유하는 전통 세라믹 유약은 황색포도상구균과 대장균에 대해 항균활성을 나타낸다. 환원 분위기에 소결한 모든 시편들은 황색포도상구균과 대장균에 대해 항균활성을 나타내나 산화분위기에서 소결한 일부 시편들만 황색포도상구균과 대장균에 대해 항균활성을 나타내었다. 산화구리를 함유하는 전통 세라믹 유약의 항균기작을 설명하기 위해 유약의 결정상, 미세구조, 이온용출, 표면 제타전위 분석을 실시하였다. 환원 분위기에서 소결한 시편들은 유약층에 Cu 입자들이 형성되는 것을 확인할 수 있다. Cu 용출량은 전체적으로 0.05 ppm 이하이며 가장 많이 용출되는 이온은 Ca 이었다. 산화구리를 3 wt.% 이상 첨가한 모든 시편들은 높은 음극의 표면 제타전위를 나타내었다. 세라믹 유약의 항균활성은 일반적으로 용출되는 양이온들과 연관되어 보이나 산화분위기에서 소결한 시편들의 대장균에 대한 항균활성은 직접적인 연관성이 나타나지 않는다. 세라믹 유약 시편의 표면 제타전위가 이온용출과 더불어 대장균에 대한 항균활성에 보조적 기여를 하는 것으로 보인다.

• 한국세라믹학회지
• /
• 제47권2호
• /
• pp.106-112
• /
• 2010

This paper presents some experimental results on incubation time for massive hydriding of Zr alloys with oxide thickness. Oxide effects experiments on massive hydriding reaction of commercial Zr alloy claddings and pre-oxidized Zr alloys with hydrogen gas were carried out in the temperature range from 300 to $400^{\circ}C$ with thermo-gravimetric apparatus. Experimental results for oxide effects on massive hydriding kinetics show that incubation time is not proportional to oxide thickness and that the massive hydriding kinetics of pre-filmed Zr alloys follows linear kinetic law and the hydriding rate are similar to that of oxide-free Zr alloys once massive hydriding is initiated. There was a difference in micro-structures between oxide during incubation time and oxide after incubation time. Physical defects such as micro-cracks and pores were observed in only oxide after incubation time. Therefore, the massive hydriding of Zr alloys seems to be ascribed to short circuit path, mechacical or physical defects, such as micro-cracks and pores in the oxide rather than hydrogen diffusion through the oxide resulting from the increase of oxygen vacancies in the hypostoichiometric oxide.

• 한국결정성장학회지
• /
• 제19권5호
• /
• pp.256-261
• /
• 2009

Sol-gel법에 의해 친수성 투명 $TiO_2$ 박막이 제조되었고, 박막의 접촉각, 표면구조, 투과율의 특성이 측정되었다. 더욱이 박막의 친수 특성을 향상시키기 위하여 계면활성제 tween 80이 이용되었다. Tween 80의 첨가량이 0, 10, 30, 50wt%일 때, 제조된 박막의 접촉각은 각각 $41.4^{\circ}$, $18.2^{\circ}$, $16.0^{\circ}$, $13.2^{\circ}$로 확인되었다. 제조된 $TiO_2$ 박막은 자외선 조사 후 Methylene blue용액을 분해시켜 흡광도를 감소시키는 광촉매 특성을 보여주었다. 일반유리(bare glass), Antimony Tin Oxide(ATO)코팅 유리, Fluorine Tin Oxide(FTO)코팅유리, Indium Tin Oxide(ITO)코팅유리 기판 위 에 Tween 80을 30 wt% 함유한 $TiO_2$ 용액을 적층하여 박막의 접촉각과 투과율을 측정하였다. 다양한 기판에 제조된 박막은 $16.2\sim27.1^{\circ}$의 표면 접촉각을 나타냈으며 자외선 조사 후에는 접촉각이 $13.2\sim17.6^{\circ}$로 낮아졌다. 특히 ATO코팅유리와 FTO 코팅유리 기판 위에 코팅된 필름은 가시광선 영역에서 각각 74.6%, 76.8%의 높은 투과율을 나타내었고, 적외선 영역에서는 각각 54.2%, 40.4%의 낮은 투과율을 나타냈다.

• 한국분말재료학회지
• /
• 제19권6호
• /
• pp.429-434
• /
• 2012

With increase in operating temperature of gas turbine for higher efficiency, it is necessary to find new materials of TBC for replacement of YSZ. Among candidate materials for future TBCs, zirconate-based oxides with pyrochlore and fluorite are prevailing ones. In this study, phase structure and thermal conductivities of $(La_{1-x}Gd_x)_2Zr_2O_7$ oxide system are investigated. $(La_{1-x}Gd_x)_2Zr_2O_7$ system are comprised by selecting $La^{3+}/Gd^{3+}$ as A-site ions and $Zr^{4+}$ as B-site ion in $A_2B_2O_7$ pyrochlore structures. With powder mixture from each oxide, $(La_{1-x}Gd_x)_2Zr_2O_7$ oxides are fabricated via solid-state reaction at $1600^{\circ}C$. Either pyrochlore or fluorite or mixture of both appears after heat treatment. For the developed phases along $(La_{1-x}Gd_x)_2Zr_2O_7$ compositions, thermal conductivities are examined, with which the potential of $(La_{1-x}Gd_x)_2Zr_2O_7$ compositions for TBC application is also discussed.

• 구강회복응용과학지
• /
• 제23권2호
• /
• pp.119-130
• /
• 2007

Purpose: This investigation was designed to estimate the flexure strength, density, and microstructure of the colored and uncolored zirconia oxide ceramics for fixed partial denture. Material and Methods: LAVATM All Ceramic(3M-ESPE, USA), Cercon Smart Ceramic(Dentsply, USA), and Z-match Ceramic(DentAim, Korea) were used for this study. All specimen was fabricated by ASTM C1161. After preparing $25{\times}2{\times}1.5mm$ of rectangular column and sitting rectangular column on universal test machine (UTM), external supporting point distance is 20.0 mm, internal supporting point distance is 10.0 mm. Specimen was loaded with 0.2 mm/min of cross head speed until fracture and at the time of broken of specimen, measuring loading value with PC software. Results: The results were obtained as follows: 1. Flexure strength of uncolored zirconia was higher than that of colored zirconia. 2. In uncolored zirconia, flexure strength of LAVATM Ceramic was more higher than the other ceramics, and it showed statistical difference between LAVATM Ceramic and Cercon Smart Ceramic (P<0.05). 3. In colored zirconia, flexure strength of LAVATM Ceramic was more higher than the other ceramics too, but they did not show statistical difference (p>0.05). 4. In Weibull analysis, Characterastic strength was showed highest value to uncolored LAVATM Ceramic and lowest value to Z-match ceramic, and Weibull modulus(m) of uncolored zirconia was higher than that of colored zirconia. 5. In XRD analysis, all group except Z-match showed high peak of t-ZrO2 but they did not show m-ZrO2. Colored zirconia group showed lower peak of t-ZrO2 than that of uncolored zirconia group.

• 한국분말재료학회지
• /
• 제20권6호
• /
• pp.453-459
• /
• 2013

Lanthanum/gadolinium zirconate coatings are deposited via suspension plasma spray with suspensions fabricated by a planetary mill and compared with hot-pressed samples via solid-state reaction. With increase in processing time of the planetary mill, the mean size and BET surface area change rapidly in the case of lanthanum oxide powder. By using suspensions of planetary-milled mixture between lanthanum or gadolinium oxide and nano zirconia, dense thick coatings with fully-developed pyrochlore phases are obtained. The possibilities of these SPS-prepared coatings for TBC application are also discussed.

• 한국분말재료학회지
• /
• 제18권3호
• /
• pp.277-282
• /
• 2011

[ $LiCoO_2$ ] a cathode material for lithium rechargeable batteries, was prepared using recycled $Co_3O_4$. First, the cobalt hydroxide powders were separated from waste WC-Co hard metal with acid-base chemical treatment, and then the impurities were eliminated by centrifuge method. Subsequently, $Co_3O_4$ powders were prepared by thermal treatment of resulting $Co(OH)_2$. By adding a certain amount of $Li_2CO_3$ and $LiOH{\cdot}H_2O$, the $LiCoO_2$ was obtained by sintering for 10 h in air at $800^{\circ}C$. The synthesized $LiCoO_2$ particles were characterized by X-ray diffraction (XRD) and Scanning Electron Microscope (SEM) analysis.

• 한국세라믹학회지
• /
• 제44권9호
• /
• pp.529-535
• /
• 2007

Calcium oxide has been used as a demolition agent in fracturing rocks and old concrete structures, etc. With the agent, demolition work can be done in safety without a noise, vibration and any other pollution, since high expansive pressure is obtained gradually by only mixing the agents with water and pouring the slurry into boreholes. But application of the non-explosive demolition agent is a time-consuming job, especially in winter. Essentially, this problem is related to the reaction rate of calcium oxide with water. This study examines the influence of additives such as cement and anhydrite on expansion pressure of calcium oxide at different curing temperatures. The expansion pressure of calcium oxide began to increase steadily with the rise of the curing temperature. When mixing calcium oxide alone with water, blown-out shot occurred. But as additives were added to calcium oxide, the reaction of calcium oxide delayed and the expansion pressure showed gradual increment. Especially, anhydrite showed a superior delaying effect than cement on the reaction of calcium oxide.