• Journal of Ginseng Research
• /
• v.26 no.2
• /
• pp.67-73
• /
• 2002

This study was done in order to evaluate the of effects on the blood lipid profiles, the body weight and body fat in 28 healthy female volunteers who had over 30% body fat by the long term intake of red ginseng product. Subjects were divided into four groups (placebo group n=7, red ginseng product group; n=7, exorcise group; n=7, exercise & red ginseng product group; n=7). Blood sampling and measuring of the body fat were taken by pre-treatment, 3 weeks, and after 12 weeks. Statistical techniques for data analysis were applied one-way ANOVA and repeated measures ANOVA. The 5% level of significance was used as the critical level for this study. In summary of results, total cholesterol, triglyceride and low density lipoproprotein cholesterol were reduced in three groups (red ginseng product group, p<0.001, exercise group, p<0.01 ; exercise & red ginseng product group, p<0.001) except placebo group. HDL-C was improved in three groups (red ginseng product group, p<0.05; exercise group, p<0.01; exercise & red ginseng product group, p<0.001) except placebo group. Body weight, percent body fat and body fat mass were reduced in three groups (red ginseng product group, p<0.01, exercise group, p<0.01 ; exercise & red ginseng product group, p<0.001) except placebo group. Finally, lean body mass was improved in three groups (red ginseng product group, p<0.05; exercise group, p<0.01; exercise & red ginseng product group, p<0.001) except placebo group.

• Journal of the Korean Society of Tobacco Science
• /
• v.27 no.2
• /
• pp.219-225
• /
• 2005

Characterizing nicotine delivery from tobacco products is important in the understanding of their addictive potential. Most previous studies report total nicotine and have not differentiated between nicotine in its protonated or free-base form. The amount of free nicotine calculated by determining pH and nicotine contents. The pH and nicotine contents in smokeless tobacco product, tobacco products and tobacco leaves were analyzed by Health Canada-Official Method T-310 and CORESTA Recommended Method $N^{\circ}62$. The content of free nicotine was calculated according to the Henderson-Hasselbalch equation and the value of $\alpha_{fb}$(the fraction of nicotine that is in the free base form) by using a pKa value of 8.02 for nicotine. The percentage of free nicotine then was calculated by dividing the free nicotine content by total nicotine content. The pH value and percentage of free nicotine ranged from 5.01 to 5.45 and $0.10\%\;to\;0.27\%$ in cut tobacco and 5.10 to 7.10 and $0.12\%\;to\;10.73\%$ in tobacco leaves, respectively.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.31 no.4
• /
• pp.121-133
• /
• 2008

In manufacturing companies, engineering information is a central data which defines a product to be produced. This is changed by various factors such as changes of product configuration, changes of drawings information of a technology's licensor, etc, and these changes essentially accompany the changes of a product BOM (Bill of Materials) structure. Thus, engineering changes gives a heavy burden to information management within enterprise because the changes of product BOM have an influence on each departmental BOM such as a procurement BOM, a manufacturing BOM, a quotation BOM, etc. Especially, these changes of product BOM due to the engineering changes is inevitably and frequently happened by a customer's requirements in a customer-oriented make-to-order manufacturing environments. In these manufacturing environments, information gap among each department from the first contact point of customer to engineering, materials, production, quality, and management is very close, and thus it is very important that the change information of product BOM due to changes of product specification and engineering information are efficiently communicated among each department. This paper describes a procedure of determining product specification and of generating product BOM, and proposes an efficient management scheme for the change process of product BOM information due to changes of product specification and engineering. Also, to show the effectiveness of the proposed product BOM management scheme, a product BOM management system is implemented for the ship engine division of 'H' company, one of customer-oriented make-to-order manufacturing enterprises.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.329-329
• /
• 2022

Accurate characterization of terrestrial precipitation variation from high spatial resolution satellite sensors is beneficial for urban hydrology and microscale agriculture modeling, as well as natural disasters (e.g., urban flooding) early warning. However, the widely-used top-down approach for precipitation retrieval from microwave satellites is limited in several hydrological and agricultural applications due to their coarse spatial resolution. In this research, we aim to apply a novel bottom-up method, the parameterized SM2RAIN, where precipitation can be estimated from soil moisture signals based on an inversion of water balance model, to generate high spatial resolution terrestrial precipitation estimates at 0.01º grid (roughly 1-km) from the C-band SAR Sentinel-1. This product was then tested against a common reanalysis-based precipitation data and a domestic rain gauge network from the Korean Meteorological Administration (KMA) over central South Korea, since a clear difference between climatic types (coasts and mainlands) and land covers (croplands and mixed forests) was reported in this area. The results showed that seasonal precipitation variability strongly affected the SM2RAIN performances, and the product derived from separated parameters (rainy and non-rainy seasons) outperformed that estimated considering the entire year. In addition, the product retrieved over the mainland mixed forest region showed slightly superior performance compared to that over the coastal cropland region, suggesting that the 6-day time resolution of S1 data is suitable for capturing the stable precipitation pattern in mainland mixed forests rather than the highly variable precipitation pattern in coastal croplands. Future studies suggest comparing this product to the traditional top-down products, as well as evaluating their integration for enhancing high spatial resolution precipitation over entire South Korea.

• Kyungpook Mathematical Journal
• /
• v.49 no.3
• /
• pp.435-450
• /
• 2009

On page 366 of his lost notebook [15], Ramanujan recorded a cubic continued fraction and several theorems analogous to Rogers-Ramanujan's continued fractions. In this paper, we derive several general formulas for explicit evaluations of Ramanujan's cubic continued fraction, several reciprocity theorems, two formulas connecting V (q) and V ($q^3$) and also establish some explicit evaluations using the values of remarkable product of theta-function.

• Natural Product Sciences
• /
• v.7 no.2
• /
• pp.60-62
• /
• 2001

Ulmus davidiana, Formitella fraxinea, and Aloe vera extracts were detected to have inhibitory effects against topoisomerase I at treatment of $5{\mu}g$. Ulmus davidiana and Aloe vera extracts were found to show inhibitory effect similar to camptothecin, Formitella fraxinea extract was found to have weak activity. We also found the potential use of those extracts as a radiation sensitizer. Radiosensitizing effect at combination treatment was increased more than 2 times at single treatment of radiation, Ulmus davidiana or Formitella fraxinea extracts. Ulmus davidiana and Formitella fraxinea extracts were found to have significant radiosensitizing effect on test tumor cell line. But, Aloe vera extract was not detected to have activity as a radiosensitizer. Ulmus davidiana and Formitella fraxinea extracts are potent radiosensitizers on tumor cell lines and should be considered for further study of active compounds.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.242-248
• /
• 1987

Recently, a quite large number of investigation is published on the subject of Flexible Manufacturing System which can cope with the volatile market demand and the variety of product. Minimum requirement of designing FMS is depicted and by investigating the communication system between the machine tool and the cell control computer, ana between the central computer and the cell control computer, when it is formed as a sub-system of an FEM, the software can be evolved to the control software of the total Flexible Manufacturing System. It is developed the communication system between the central computer and the cell control computer which is the basic structure of the control architecture of FMS under the concept of DNC (Direct Numerical Control). It is used CYBER 180-830 as the central computer, and GMC-1100 computer as the cell control computer, and the main basic program is developed and tested, thus forming a DNC system which can be used in educational environment.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.5 no.1
• /
• pp.131-134
• /
• 2002

Mulberry being the only food of silkworm, Bombyx mori L., is of great economic importance to the silk industry, The success in cocoon production mainly depends on the supply of quality leaves in sufficient quantity. In mulberry, where the economic product is leaf, the uptake of nitrogen from soil is very heavy and high responses to application of nutrients have been reported. Nitrogen supports vegetative growth particularly the leaf biomass. Variation in nitrogen harvest index and other physiological and yield contributing traits were estimated in five mulberry genotypes. Considerable variation was observed for nitrogen harvest index, protein yield per plant and harvest index. The correlation studies indicated the protein yield per plant was significantly correlated with leaf yield, nitrogen content in leaf, nitrogen harvest index and harvest index. The broad sense heritability estimates revealed that harvest index showed highest heritability (88.07%) followed by nitrogen content (82.52%), protein yield (70.28%) and nitrogen harvest index (66.52%).

• Journal of the Korean Society of Tobacco Science
• /
• v.31 no.2
• /
• pp.95-106
• /
• 2009

Semiquantitative analysis by ICP-MS has proven to be a powerful tool for fast screening, in addition, it does not require the element of interest to be present in the calibration standard, making it especially useful for the analysis of unknown samples. In this study, seven cigarette samples were analyzed by the rapid semi-quantitative analysis method based on the ICP-MS. For each cigarette sample, cut tobacco, cigarette paper, filter (before and after smoking), and smoke condensate were analyzed. The accuracy of the analysis technique was evaluated by comparing results obtained from Calibration Check Standard(CCS) and calibration method. Relative Percentage Error(RPE) value of all elements measured for three CCS showed a stable result of less than ${\pm}20%$. Compared to full quantitative analysis by calibration method, the results for cigarette samples showed average error within ${\pm}15%$.

• Journal of the Korean Chemical Society
• /
• v.57 no.5
• /
• pp.591-598
• /
• 2013

A series of chiral prolinamide compounds with pyridine-2, 6-dicarboxylic acid moieties derived from L-proline have been designed and synthesized, their catalytic properties for direct asymmetric aldol reactions were also studied in this article. These catalysts gave the aldol product in high yield (87%) and high enantioselectivity, up to 85%, of the anti-structure at room temperature but gave disappointing results at a lower temperature or when additive was added. Conditions, including solvents, temperature and additives were screened for the reactions. Moreover, the influence of presence of water on yield and stereoselectivity was also discussed.