• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2004.03a
• /
• pp.77-83
• /
• 2004

최근 통신, 전자, 제어, 기계등의 첨단기술을 적용하여 도로와 차량 그리고 운전자의 일체화를 통한 교통체계의 효율화, 첨단화, 정보화를 실현하기 위한 ITS(Intelligent Transport System)연구가 많이 진행되고있다. 그러나 이러한 ITS에서의 기본적인 자료인 도로위치정보의 정확도가 낮은 단계인 자료로서 시스템을 구축하고 있다. 또한 기존도로의 설계자료나 수치지도가 없는 지역인 경우가 많아 그 자료들을 획득하는데 많은 비용이 소모된다. 따라서 본 연구에서는 GPS 측위기법과 수치사진측량의 기법으로 도로중심선을 추출하여 보다 정확한 기법을 제시하고자한다.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2004.03a
• /
• pp.543-550
• /
• 2004

컴퓨터의 발전에 따라 현재 제4세대 수치사진측량의 활용도가 광범위하게 진행되고 있다. 특히 비디오동영상을 이용하여 실용적이며, 비전문가들도 활용할 수 있는 부분들이 증가하고 있다. 이러한 현시점에서 국가산업의 중추적인 시설물 도로분야에서 도로안전진단과 유지관리목적으로 도로정보획득 및 도로정보수집에 많은 연구를 하고 있다. 따라서, 본 연구에서는 실용성, 경제성이 있는 비전문가용인 디지털비디오 동영상을 이용하여 도로중심선의 3차원 위치정보를 추출하여 도로정보화사업의 기본적인 자료로 제공되리라 판단된다.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.03a
• /
• pp.779-786
• /
• 2002

To find a long term horizontal movement of superstructure caused by seasonal thermal change, several types of gages are installed such as soil earth pressuremeter behind stub abutment and jointmeter between approach slab and relief slab. As results, maximum passive earth pressure behind integral bridge abutments centerline with lateral movement of superstructure is about 1/6 of classic Rankine's earth pressure. And its distribution is not triangular but rectangular shape due to shape behind integral bridge abutments.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.03a
• /
• pp.63-65
• /
• 2008

CFD cold-flow analysis results of the air-blast swirl nozzle for the small aircraft engine combustor are shown. Two major recirculation zones are observed near the nozzle. The centerline recirculation zone velocity profile of CFD is compared with the experimental results.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1249-1251
• /
• 2003

In this paper, a framework for creating road network from road edges is proposed. The present framework mainly includes two modules: road modeler and network generator. Road modeler creates the road polygons from the original road edges, and network generator performs converting road polygons to road network with good connectivity at all intersections. A prototype system is also built, and some experimental results are also presented to demonstrate the effectiveness of the proposed framework.

• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.4
• /
• pp.81-89
• /
• 2014

In Korea, National spatial data infrastructure has implemented in order to integrated manage and share the national spatial information producted by public agencies and local governments. The necessities of systematic quality management are raised, because information, which is generated by different agencies, is integrative managed by national level. In this paper, the establishment of BPR(Business Process Reengineering) for national spatial data infrastructure quality management system. Quality management business is defined as quality management object definition, quality measuring, evaluation and analysis, and quality enhancement process. Next, activities for each process are designed. For the quality management business, business rule(BR) is required for determining error. We derive the BR for six objects(legal-dong, railway boundary, railway centerline, road boundary, road centerline, building) among the basic spatial information. Other information's BR can be generated by using the derivation method described in this paper. Based on the BPR of this paper and derived BR, national spatial data infrastructure quality management system can be implemented in the future.

• Journal of Cadastre & Land InformatiX
• /
• v.44 no.1
• /
• pp.127-138
• /
• 2014

It can be effective to extract and apply the updated information from the newly updated map data for updating road data of topographic map. In this study, update target data and update reference data are overlaid and the update objects are explored using network matching technique. And the network objects are classified into five matching and update cases and the update processes for each case are applied to the test data. For this study, road centerline data of digital topographic map is used as an update target data and road data of Korean Address Information System is used as an update reference data. The buffer-based network matching method is applied to the two data and the matching and update cases are classified after calculating the overlaid ratio of length. The newly updated road centerline data of digital topographic map is generated from the application of update process for each case. As a result, the update information can be extracted from the different map dataset and applied to the road network data updating.

• Journal of the Korean Society of Systems Engineering
• /
• v.13 no.1
• /
• pp.33-39
• /
• 2017

This paper describes the system engineering approach for the heat transfer analysis of plus7 fuel rod for APR1400 using, a commercial software, ANSYS. The fuel rod is composed of fuel pellets, fill gas, end caps, plenum spring and cladding. The heat is transferred from the pellet outward by conduction through the pellet, fill gas and cladding and further by convection from the cladding surface to the coolant in the flow channel. The goal of this paper is to demonstrate the temperature and heat flux change from the fuel centerline to the cladding surface when having maximum fuel centerline temperature at 100% power. This phenomenon is modelled using the ANSYS FEM code and analyzed for steady state temperature distribution across the fuel pellet and clad and the results were compared to the standard values given in APR1400 SSAR. Specifically the applicability of commercial software in the evaluation of nuclear fuel temperature distribution has been accounted. It is note that special codes have been used for fuel rod mechanical analysis which calculates interrelated effects of temperature, pressure, cladding elastic and plastic behavior, fission gas release, and fuel densification and swelling under the time-varying irradiation conditions. To satisfactorily meet this objective we apply system engineering methodologies to formulate the process and allow for verification and validation of the results acquired. The close proximity of the results obtained validated the accuracy of the FEM analysis of the 2D axisymmetric model and 3D model. This result demonstrated the validity of commercial software instead of proprietary in-house code that is more costly to develop and maintain.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.29 no.3
• /
• pp.253-260
• /
• 2016

In this paper, the optimal seismic design method for inducing the beam-hinge collapse mechanism of steel moment frames is presented. This uses the non-dominated sorting genetic algorithm II(NSGA-II) as an optimal algorithm. The constraint condition for preventing the occurrence of plastic hinges at columns is used to induce the beam-hinge collapse mechanism. This method uses two objective functions to minimize the structural weight and maximize the dissipated energy. The proposed method is verified by the application to nine story steel moment frame example. The minimum column-to-beam strength ratio to induce the beam-hinge collapse mechanism are investigated based on the simulation results. To identify the influence of panel zone on the minimum column-to-beam strength ratio, three analytic modeling methods(nonlinear centerline model without rigid end offsets, nonlinear centerline model with rigid end offsets, nonlinear model with panel zones) are used.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.4
• /
• pp.397-402
• /
• 2013

In this study, we carried out the each lines of section, using GC (green silicon carbide) whetstone, the SCM415 material which separated by after and before heat treatments process, in 3+2 axis machining centers for integrated grinding after cutting end mill works, the spindle speed 8000 rpm and feed rate 150 mm/min. For the analysis of the centerline average roughness (Ra), we measured by 10 steps stages. Using Finite element analysis, we found the result of the load analysis effect of the assembly parts, when applied the 11 kg's load on both side of the ATC (Automatic tool change) arm. The result is as follows. For the centerline average roughness (Ra) in the non-heat treatment work pieces, are appeared the most favorable in the tenth section are $0.510{\mu}m$, that were shown in the near the straight line section which is the smallest deformation of curve. In addition, the bad surface roughness appears on the path is to long by changing angle, the more inclined depth of cut, because the chip discharging is not smoothly.