• Journal of Mechanical Science and Technology
• /
• v.15 no.6
• /
• pp.743-751
• /
• 2001

A Prototype reaction wheel, named the Hankuk Aviation University (HAU) reaction wheel, has been developed for KAISTSAT satellite series. Torque and force disturbances are inherent in reaction wheels, and thus the force and torque characteristics should be examined for every newly developed reaction wheel. The torque and force disturbance noises in the prototype HAU reaction wheel are measured with a torque-measuring table developed for the present study. A new measuring procedure based on a simple principle is applied for the measurements. The frequency characteristics of the torque and force noises are analyzed by examining the power spectral density. The effect of the torque noise on the attitude stability is also examined through numerical simulations with a single-axis attitude model. The noise-induced attitude error and jitter and found to be well below the specified error limits for the KAISTSAT satellite series.

• Journal of Radiation Protection and Research
• /
• v.26 no.3
• /
• pp.183-190
• /
• 2001

The activity concentration of primordial radionuclides i.e., $^{238}U$ series, $^{232}Th$ series and $^{40}K$, in soil samples collected from Udagamandalam environment, have been measured by employing NaI (Tl) Gamma ray Spectrometer. The absorbed gamma dose rate has also been simultaneously measured by using both Environmental Radiation Dosimeter at each soil sampling location (ambient gamma dose) as well as from the gamma dose derived from the activity concentration of the primordial radionuclides. The results of activity concentration of each radio nuclides in soil, absorbed dose rate in air due to soil activity and possible cosmic radiation at each location along with human effective dose equivalent for Udagamandalam environment are presented and discussed.

• Proceedings of the KIPE Conference
• /
• 2006.06a
• /
• pp.235-238
• /
• 2006

As the screen size of LCD TV increases, an external electrode fluorescent lamp (EEFL) has been suggested to be applicable as backlight source for LCD TV. Since the EEFL has non-linear characteristics, which makes the analysis and design complicated. In this paper, the characteristics of the EEFL are investigated and a full-bridge RLC series-resonant inverter is analyzed and designed for EEFL backlight of 32-inch LCD TV. Finally, the experimental results are shown to validate the analysis and design.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.2 no.1
• /
• pp.1-6
• /
• 2002

A new closed-form expressions to calculate frequency-dependent distributed inductance and the associated distributed series resistance of single interconnect on a lossy silicon substrate (CMOS technology) are presented. The proposed analytic model for series impedance is based on a self-consistent field method and the vector magnetic potential equation. It is shown that the calculated frequency-dependent distributed inductance and the associated resistance are in good agreement with the results obtained from rigorous full wave solutions and CAD-oriented equivalent-circuit modeling approach.

• Journal of electromagnetic engineering and science
• /
• v.19 no.1
• /
• pp.64-70
• /
• 2019

In this study, a compact series-fed center-fed open-stub (SFCFOS) linear array antenna for K-band applications is presented. The antenna is composed of a single-line 10-element linear array. A symmetrical Chebyshev amplitude distribution (CAD) is used to obtain a low sidelobe characteristic against a uniform amplitude distribution (UAD). The amplitude is controlled by varying the width of the microstrip patch elements, and open-ended stubs are arranged next to the last antenna element to use the energy of the radiating signal more effectively. We insert a series-fed stub between two patches and obtain a low mutual coupling for a 4.28-mm center-to-center spacing ($0.7{\lambda}$ at 21 GHz). A prototype of the antenna is fabricated and tested. The overall size of the uniform linear array is $7.04{\times}1.05{\times}0.0563{\lambda}_g^3$ and that of the Chebyshev linear array is $9.92{\times}1.48{\times}0.0793{\lambda}_g^3$. The UAD array yields a ${\mid}S_{11}{\mid}$ < -10 dB bandwidth of 1.33% (20.912-21.192 GHz) and 1.45% (20.89-21.196 GHz) for the CAD. The uniform array design gives a -23 dB return loss, and the Chebyshev array achieves a -30.68 dB return loss at the center frequency with gains of 15.3 dBi and 17 dBi, respectively. The simulated and measured results are in good agreement.

• Safety and Health at Work
• /
• v.7 no.1
• /
• pp.83-85
• /
• 2016

Effective interventions to reduce work-related exposures are available for many types of work-related diseases or injuries. However, knowledge of the impact of these interventions on injury or disease outcomes is scarce due to practical and methodological reasons. Study designs are considered for the evaluation of occupational health interventions on occupational disease or injury. Latency and frequency of occurrence of the health outcomes are two important features when designing an evaluation study with occupational disease or occupational injury as an outcome measure. Controlled evaluation studies-giving strong indications for an intervention effect-seem more suitable for more frequently occurring injuries or diseases. Uncontrolled evaluation time or case series studies are an option for evaluating less frequently occurring injuries or diseases. Interrupted time series offer alternatives to experimental randomized controlled trials to give an insight into the effectiveness of preventive actions in the work setting to decision and policy makers.

• Journal of Korean Society on Water Environment
• /
• v.20 no.3
• /
• pp.223-230
• /
• 2004

The QUAL2E and Box-Jenkins time series model were applied to the Miho river, a main tributary of the Geum river, to predict water quality. The models are widely used to predict water quality in rivers and watersheds because of its accuracy. As results of the study, we concluded as follows: Pollutant loadings in upper stream of Miho river were determined to 57,811 kgBOD/d, 19,350 kgTN/d, and 5,013 kgTP/d. The loading of TN in Mushim river was 19,450 kgTN/d, respectively. As the mass loadings were compared with pollutant sources, it concluded that the farming livestock contributed highly to mass emissions of BOD and TP and the population contributed to TN mass loading. The observed water quality values were applied to the models to verify and the models were used to predict the water quality. The QUAL2E Model predicted the concentrations of DO, BOD, TN and TP with high accuracy, but not for E-Coli. The Box-Jenkins time series model also showed high prediction for DO, BOD and TN. However, the concentrations of TP and E-Coli were poorly predicted. The result shows that the QUAL2E model is more applicable in Miho basin for prediction of water quality compared to Box-Jenkins time series model.

• Journal of the Korean Electrochemical Society
• /
• v.8 no.2
• /
• pp.77-81
• /
• 2005

Porous-composite electrodes have been developed using silica gel, which reduce carbon aerogel usage with high cost. Silica gel powder was added to the carbon aerogel to simplify the manufacturing procedure and to increase the wet-ability, the mechanical strength and the CDI efficiency. Porous composite electrodes composed of carbon aerogel and silica gel powder were prepared by paste rolling method. Carbon aerosol composite electrodes with $10\times10cm^2$ are placed face to face between spacers, and assembled the four-stage series cells for CDI process. Each stage is composed of 45 cells. Four-stage series cells (flow through cells) for CDI process are put in continuous-system reactor containing 1,000ml-NaCl solution bath of 1,000 ppm. The four-stage series cells with carbon aerogel electrodes are charged at 1.2V and are discharged at 0.001V, and then read the current. Conclusively, removal efficiencies of ions using the four-stage series cells composed of carbon aerogel composite electrodes show good removal efficiency of $99\%$ respectively.

• Korean Journal of Remote Sensing
• /
• v.39 no.5_4
• /
• pp.1085-1095
• /
• 2023

Time-series data generated from satellite data are crucial resources for change detection and monitoring across various fields. Existing research in time-series data generation primarily relies on single-image analysis to maintain data uniformity, with ongoing efforts to enhance spatial and temporal resolutions by utilizing diverse image sources. Despite the emphasized significance of time-series data, there is a notable absence of automated data collection and preprocessing for research purposes. In this paper, to address this limitation, we propose a system that automates the collection of satellite information in user-specified areas to generate time-series data. This research aims to collect data from various satellite sources in a specific region and convert them into time-series data, developing an automatic satellite image collection system for this purpose. By utilizing this system, users can collect and extract data for their specific regions of interest, making the data immediately usable. Experimental results have shown the feasibility of automatically acquiring freely available Landsat and Sentinel images from the web and incorporating manually inputted high-resolution satellite images. Comparisons between automatically collected and edited images based on high-resolution satellite data demonstrated minimal discrepancies, with no significant errors in the generated output.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.5
• /
• pp.1703-1706
• /
• 2012

Rice blast is the most serious disease of rice due to its harmfulness and its world wide distribution. $Magnaporthe$ $grisea$ is the cause of rice blast disease and destroys rice enough to feed several tens of millions of people each year. Fungicides are commonly used to control rice blast. But $M.$ $grisea$ acquires resistance to chemical treatments by genetic mutations. 2-Phenylimino-1,3-thiazolines were proposed as a novel class of fungicides against $M.$ $grisea$ in the previous study. To develop compounds with a higher biological activity, a new series of 2-phenylimino-1,3-thiazolines was synthesized and its fungicidal activity was determined against $M.$ $grisea$. The QSAR analysis was carried out on a series of 2-phenylimino-1,3-thiazolines. The QSAR results showed the dependence of fungicidal activity on the structural and physicochemical features of 2-phenylimino-1,3-thiazolines. Our results could be used as guidelines for the study of the mode of action and further design of optimal fungicides.