• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.467-468
• /
• 2009

For the manufacture of the $CuGaS_2$, Cu, Ga and S were vapor-deposited in the named order. Among them, Cu and Ga were vapor-deposited by using the Evaporation method in consideration of their adhesive force to the substrate so that the composition of Cu and Ga might be 1 : 1, while the surface temperature having an effect on the quality of the thin film was changed from R.T.[$^{\circ}C$] to $150[^{\circ}C$] at intervals of 50[$^{\circ}C$]. As a result, at 300[$^{\circ}C$]of the Annealing temperature, their chemical composition was measured in the proportion of 1 : 1 : 2. It could be known from this experimental result that it is the optimum condition to conduct Annealing on the $CuGaS_2$ thin film under a vacuum when the $CuGaS_2$ thin film as an optical absorption layer material for a solar cell is manufactured.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.29 no.4
• /
• pp.618-624
• /
• 2002

Effect of the roasted barley tea in commercial markets on the adherence to the saliva-coated hydroxyapatite(HA) beads and the cell surface hydrophobicity of Streptococcus mutans and Streptococcus sobrinus as cariogenic microorganism was examined in vitro. Adherence activity and hydrophobicity in bacteria tested in all the barley tea samples decreased and the values were different according to the type of tea and the type of treatment. The inhibition of bacterial adsorption to HA beads suggest that barley tea active molecules as catechins and melanoidins may adsorb to a host surface, preventing the tooth receptor from interacting with any bacterial adhesions. The obtained results showed that the barley tea may inhibit bacterial adherence, the first step of the pathogenesis of dental caries in which these microorganism are involved.

• Journal of Korea Foundry Society
• /
• v.14 no.5
• /
• pp.471-479
• /
• 1994

Al-2%Si-2%Mg alloy containing SiC particle in 20, $70{\mu}m$ were prepared by mean of squeeze casting with various pressure 50, 100, 150 and 220MPa respectively. The specimens were made by casting into $50{\Phi}{\times}100{\ell}$ mold under various squeeze conditions(pressures, pressurizing temperature, particle sizes). Mechanical properties(hardness, tensile strength, elongation and wear characteristics) were evaluated at room temperature with those various fabrication factors. It became feasible to make favorable Al-SiCp composite free from casting defects by the injection of Ar gas during melting and 100MPa pressure squeeze casting. However, pressure of 50MPa was not sufficient to avoid completely porosity formation as a result of precessing and shrinkage during solidification. As the particle size is smaller and the squeeze pressure is higher, the hardness and tensile strength at room temperature are higher. Cell size became smaller gradually with increase of squeeze pressure. With increase of squeeze pressure(MPa), wear behaviors of those composites were changed from adhesive into abrasive wear, and the tendency of above behavior became outstanding with increasing sliding speed. The chemical reaction(4Al＋3SiC${\rightarrow}$$Al_4C_3+3Si$) is more accelerated at interface between SiCp and matrix with increase of squeeze pressure. Therefore $Al_4C_3$ intercompound and Si peak intensity is increased at interface.

• Journal of Pharmaceutical Investigation
• /
• v.30 no.4
• /
• pp.247-252
• /
• 2000

The advantages of transdermal administration are avoiding hepatic first pass effect, minimizing inter- and intra-patient variation, maintaining steady-state plasma level to provide long-term therapy from a single dose, and allowing a rapid termination of drug input. Clenbuterol, a selective ${\beta}_2-adrenergic$ receptor stimulant, has been introduced as a potent bronchodilator for patients with bronchial asthma, chronic obstructive bronchial disease. For the development of transdermal systems containing clenbuterol, two limiting factors - long lag time and low flux - must be overcome. In this study, we attempted to select optimal formulation for preparation of clenbuterol patch using hairless mouse skin and flow-through diffusion cell. The flux of clenbuterol increased as the percent of clenbuterol dose dependently in the concentration range of 5-15%. Based on this result, we fixed the concentration of clenbuterol as 15%. The effect of various penetration enhancers on percutaneous absorption of clenbuterol through hairless mouse skin was investigated. Labrafil was the most effective enhancer, which increased the permeability of clenbuterol approximately 4-fold compared with the control without penetration enhancer. Optimal enhancer concentration was 3%. The effect of various adhesives on penetration of clenbuterol was also investigated. Among the adhesives studied, MA-31 was the most effective adhesive. Furthermore, the clenbuterol patch composed of 15% clenbuterol, 3% Labrafil and 82% MA-31, which gave most excellent penetration of drug in in vitro penetration study, maintained therapeutic plasma levels in in vivo study using S.D. rats. These studies demonstrated a good feasibility of clenbuterol administration through the intact skin using a transdermal patch, and show a possibility of the development of clenbuterol patches.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.7
• /
• pp.600-605
• /
• 2007

Process variables for manufacturing the $CuInSe_2$ thin film were established in order to clarify optimum conditions for growth of the thin film depending upon process conditions (substrate temperature, sputtering pressure, DC/RF Power), and then by changing a number of vapor deposition conditions and Annealing conditions variously, structural and electrical characteristics were measured. Thereby, optimum process variables were derived. For the manufacture of the $CuInSe_2$, Cu, In and Se were vapor-deposited in the named order. Among them, Cu and In were vapor-deposited by using the sputtering method in consideration of their adhesive force to the substrate, and the DC/RF power was controlled so that the composition of Cu and In might be 1 : 1, while the surface temperature having an effect on the quality of the thin film was changed from $100^{\circ}C\;to\;300^{\circ}C$ at intervals of $50^{\circ}C$. The diffract fringe of X-ray, which depended upon the substrate temperature and the Annealing temperature of the manufactured $CuInSe_2$ thin film, was investigated. scanning electron microgaphs of represents a case that a sample manufactured at the substrate temperature of $100^{\circ}C$ was thermally treated at $200{\times}350^{\circ}C$. As a result, at $500^{\circ}C$ of the Annealing temperature, their chemical composition was measured in the proportion of 1 : 1 : 2. It could be known that under this condition, the most excellent thin film was formed, compared with the other conditions.

• Journal of Ginseng Research
• /
• v.45 no.1
• /
• pp.75-85
• /
• 2021

Background: Invasive infections due to foodborne pathogens, including Salmonella enterica serovar Typhimurium, are prevalent and life-threatening. This study aimed to evaluate the effects of ginsenoside Rg3 (Rg3) on the adhesion, invasion, and intracellular survival of S. Typhimurium. Methods: The impacts of Rg3 on bacterial growth and host cell viability were determined using the time kill and the 3-(4,5-dimethyl-2-thiazolyl)-2,5-diphenyl-2H-tetrazolium bromide assays, respectively. Gentamicin assay and confocal microscopic examination were undertaken to determine the effects of Rg3 on the adhesive and invasive abilities of S. Typhimurium to Caco-2 and RAW 264.7 cells. Quantitative reverse transcription polymerase chain reaction was performed to assess the expression of genes correlated with the adhesion, invasion, and virulence of S. Typhimurium. Results: Subinhibitory concentrations of Rg3 significantly reduced (p < 0.05) the adhesion, invasion, and intracellular survival of S. Typhimurium. Rg3 considerably reduced (p < 0.05) the bacterial motility as well as the release of nitrite from infected macrophages in a concentration-dependent manner. The expression of genes related to the adhesion, invasion, quorum sensing, and virulence of S. Typhimurium including cheY, hilA, OmpD, PrgK, rsgE, SdiA, and SipB was significantly reduced after Rg3 treatment. Besides, the compound downregulated rac-1 and Cdc-42 that are essential for actin remodeling and membrane ruffling, thereby facilitating Salmonella entry into host cells. This report is the first to describe the effects of Rg3 on "trigger" entry mechanism and intracellular survival S. Typhimurium. Conclusion: Rg3 could be considered as a supplement agent to prevent S. Typhimurium infection.

• Journal of Species Research
• /
• v.11 no.4
• /
• pp.266-277
• /
• 2022

The current surveys of Ulva in the subtidal area around Jeju Island give a chance to discover unrecorded green algal species of the Korean macroalgal flora. As a result of this investigation, we found Ulva adhaerens Matusmoto & Shimada, inhabiting the subtidal regions, up to 15 m deep, and conducted the DNA barcoding on plastid rbcL-3P and tufA regions with describing the morphological characteristics. Our specimens of U. adhaerens forms a monophyletic clade with the Japanese type specimen and U. piritoka Ngāti Kuri, Heesch & W.A. Nelson from New Zealand exhibiting each 0.3% sequence divergences, respectively, in the plastid rbcL-3P. The genetic variation of U. adhaerens clade is 1.0-3.9% in rbcL-3P and 4.8-9.8% in tufA to each Ulva species, including the generic type, U. lactuca Linneaus. The morphology of Korean U. adhaerens specimens is identical to the type specimens of U. adhaerens from Japan having the development of rhizoidal filaments from both of the cell layers of the distromatic blade and the extension of rhizoidal clumps with adhesive trait between blades by extended rhizoidal clumps at the basal blades. The thallus attachment to substrate is by numerous minute discoidal plates made up of rhizoids originating from the inner part of distromatic blades in basal. Although there are still some problems to resolve the relationship between U. adhaerens and U. piritoka in the rbcL dataset and the phylogenetic pattern of the Group II intron of rbcL, we propose the new record of U. adhaerens in Korean macroalgal flora based on the morphological characteristics of Korean specimens. Continued study of the genus Ulva by morphological and molecular assessment will delimit the species of Ulva, elucidate the relationships between them, and uncover the species diversity.

• Composites Research
• /
• v.20 no.5
• /
• pp.26-33
• /
• 2007

Pull-out and shear strengths of insert Joints of sandwich structure were investigated by experiment. Specimens were prepared by cocuring of nomex honeycomb core and carbon-epoxy composite face using an adhesive FM73. A total of 75 specimens with 10 different types depending on the core height and density, face thickness, and loading direction were tested. In the test under pull-out loading, although both the core height and density affect the failure loads, the effect of cell density is more serious. Dominant factor fur failure loads of the joints under shear loading is face thickness and the effect of core height is negligible. In the joint with same dimension, failure loads vary depending on the potted area of the core, particularly in the pull-out test.

• Current Photovoltaic Research
• /
• v.11 no.4
• /
• pp.114-117
• /
• 2023

Transparent Photovoltaic (PV) modules have recently been in the spotlight because they can be applied to buildings and vehicles. However, crystalline silicon (c-Si) solar modules, which account for about 90% of the PV module market, have the disadvantage of applying transparent PV modules due to their unique opacity. Recently, a see-through type PV module using a crystalline silicon solar strap has been developed. However, there is a problem due to a decrease in aesthetics due to the metal ribbon in the center of the see-through type PV module and difficulty bonding the metal ribbon due to the low voltage output of the strap. In this study, to solve this problem, we developed a fabrication process of series connected c-Si solar strap cells using the c-Si solar cells. We succeeded in fabricating a series connected strap with a width of 2-10 mm, and we plan to manufacture an aesthetic see-through type c-Si PV module.

• Biomedical Science Letters
• /
• v.2 no.1
• /
• pp.31-40
• /
• 1996

Escherichia coli is one of the most common etiological agents in urinary tract infection. An important virulence factor is the adhesive capacity of E. coli to uroepithelial cell, mediated by bacterial fimbriae. The Adhesion property has been regarded as an important virulence determinant in urinary tract infections. A total of 60 patients, who were diagnosed microbiologically as urinary tract infections, were examined by immunoblotting and enzyme-linked immunosorbent assay(ELISA). Uropathogenic E. coli with recombinant plasmid were positive for mannose resistant hemagglutination (MRHA). For identification of p-fimbriae subtype in uropathogenic E. coli, In the immunoblot analysis, specific bands in the range of p-fimbriae molecular weight of 17KD-22KD were identified. For the distribution of p-fimbriae subtype in the patient sera, 34/60(56.7%) were positive for $F7_1$, 28/60(46.7%) were positive for $F7_2$, and 30/60(50%) were positive for F13 with immunoblotting method. similar trends were observed in the enzyme-linked immunosorbent assay. Relatively good specificity(92.6%) and sensitivity(90%) were found in the ELISA test system using mixed antigens of purified $F7_1$, $F7_2$, and F13 p-fimbriae, and 60 sera from patients with urinary tract infections. In conclusion The serological tests were convenient method in diagnosis of urinary tract infections. among those ELISA could be recommended in diagnosis of urinary tract infections.