• 전기전자학회논문지
• /
• 제7권2호
• /
• pp.218-222
• /
• 2003

전자파 방사 및 측정 시험설비로 표준 시험장인 야외시험장을 사용하고 있으나 시험장 구축의 어려움으로 이를 대체할 수 있는 대용시험장을 사용하여 측정시험을 할 수 있도록 하고 있다. 본 논문에서는 최적화된 측정시스템을 구성하기 위한 대용시험시설인 GTEM CELL(Gigahertz Transverse Electro Magnetic Cell)의 구조분석 및 설계를 하기 위하여 내부도체(Septum)의 넓이 및 두께 변화에 따른 내부도체의 특성임피던스 변화를 살펴보았다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.109-112
• /
• 2007

In this paper, a mathematical modeling was developed to simulate 1kW class air cooled Polymer Electrolyte Membrane Fuel Cell(PEMFC) system. The proposed modeling was conducted under SIMULINK based environment. The model ing was developed based on the thermodynamic and chemical equilibrium. The objective is to design and implement the entire fuel cell system model ing including the system controller modeling. The fuel cell process and the control system modeling should have to be connected with each other simultaneously， therefore the two types of modeling influences each other when the system simulator run. The fuel cell modeling libraries are simulated using the SIMULINK under the thermodynamic and chemical equilibrium base. The PID controller application was designed and developed to test the process modeling and verify it. This the prototype development of the fuel cell system to design and test more complicate fuel cell systems, like the residential power generation system. The simulation results was compared to the real PEMFC system performance. We have achieved the reasonable accordance with the Lab test and the simulation results.

• 전자공학회논문지A
• /
• 제31A권6호
• /
• pp.199-208
• /
• 1994

This paper proposes a delay fault test technique for ICs and PCBs with the boundary-scan architectures supporting ANSI/IEEE Std 1149.1-1990. The hybrid delay fault model, which comprises both of gate delay faults and path delay faults, is selected. We developed a procedure for testing delay faults in the circuits with typical boundary scan cells supporting the standard. Analyzing it,we concluded that it is impractical because the test clock must be 2.5 times faster than the system clock with the cell architect-ures following up the state transition of the TAP controller and test instruction set. We modified the boundary-scan cell and developed test instructions and the test procedure. The modified cell and the procedure need test clock two times slower than the system clock and support the ANSI/IEEE standard perfectly. A 4-bit ALU is selected for the circuits under test. and delay tests are simulated by the SILOS simulator. The simulation results ascertain the accurate operation and effectiveeness of the modified mechanism.

• 대한약침학회지
• /
• 제5권1호
• /
• pp.61-79
• /
• 2002

Objective: The purpose of this study was to investigate acute and subacute toxicity and sarcoma-180 anti-cancer effects of Herbal acupuncture with Anneniacae amarum semen (Haeng-in) in mice and rats. Method: Balble mice were injected intraperitoneany with Haeng-In extract for $LD_{50}$ and acute toxicity test. Sprague-Dawley rats were injected intraperitoneally with Haeng-In extract for subacute toxicity test. TheAnneniacae amarum semen Herbal-Acupuncture was injected on Chung-wan (CV12) of mice with Sarcoma-180 cancer cell line. Results: 1. $LD_{50}$ was uncountable as none of the subjects expired from the treatment groups during the test. 2. The clinical signs and the body weight of mice treated with 0.1cc and 0.2cc Haeng-In extract were not affected during the acute toxicity test. 3. In acute toxicity test of serum biochemical values of mice, total protein and albumin were decreased in treatment group Ⅰ. Glucose was increased, and total cholesterol was decreased in treatment groups. GPT was increased in treatment group Ⅰ. 4. In subacute toxicity test, toxic symptoms were not detected in the treatment groups. 5. In subacute toxicity test, the body weight was increased in treatment groups on 14th and 21st day. 6. In subacute toxicity test. liver weight was increased in treatment group Ⅱ, and spleen weight was increased in treatment group Ⅱ. Lung weight was increased in an the treatment groups.(p<0.05) 7. In subacute toxicity test, severe tissue injury was found in lung and liver, especially treatment group Ⅰshowed more significant lung damage compared to treatment group l. 8. In subacute toxicity test, WBC. MCH and MCHC were increased in an the treatment groups, RBC, HGB and HCT were decreased in treatment group H(p<0.05). 9. In subacute toxicity test of serum biochemical values of rats, triglyceride was decreased in all the treatment groups. ALP was decreased in treatment group Ⅰ. and creatinine was decreased in treatment group Ⅱ. BUN/CR was increased in treatment group Ⅱ(p<0.05). 10. Median survival time of Sarcoma-180 cancer cell treated with Haeng-In was increased in all the treatment groups by twenty percent, compared to the control group(p<0.05). 11. Natural killer cell activity about the Sarcoma-180 cell was decreased at the ratio of 100:1 but was increased at the ratio of 10:1. In treatment group Ⅱ, increase was found at the ratio of 100:1 and 50:1 (p<0.05). 12. Interleukin-2 productivity of the Sarcoma-180 cell was decreased in treatment group I, but was increased in treatment group Ⅱ(p<0.05). Conclusion: According to the results, we can conclude Herbal-acupuncture with Anneniacae amarum semen caused toxicity, and had effects in Sarcoma-180 cancer cell.

• 한국수정란이식학회지
• /
• 제11권1호
• /
• pp.41-50
• /
• 1996

This experiment was carried out to investigate the ovarian responses of the ovulation point, ovarian weight and size, the number of ovarian follicles and collected embryos, and to study the effects of the developmental stages (oocytes, 2-4 cell. 8-16 cell and morulae), additional levels of Ficoll (0, 15, 30%) on the survival rate (FDA-test) of rat embryos frozen in vitrification solution (20% glycerol + 10% ethylene glycol + 10% sucrose). Sunanarized results was as follows; 1. The mean ovulation point per head was 7, and the weight of ovaries was 0.03g. The size of ovary was 5.9 mm(L) and 4.6 mm(W), and the number of ovarian follicles over and below 2 mm was 4.7 and 8.7, respectively. The number of the collected embryos per head was 5.5 (79%). 2. 2. The FDA score of embryos frozen in 20 G 10 E 10 S without Ficoll was 2.8 (oocyte), 2.6 (2-4 cell), 3.9 (8-16 cell) and 3.6 (morula), respectively. However, there were no significant differences among treatments. 3. The FDA score of embryos frozen in 20 G 10 E 10 S with 15% Ficoll was 3.4 (oocyte), 4.0 (2-4 cell), 4.7 (8-16 cell) and 4.8 (morulae), respectively (P>0.05). 4. The FDA score of embryos frozen in 20 G 10 E 10 S with 30 % Ficoll was 3.7 (oocyte), 3.2 (2-4 cell), 4.4 (8-16 cell) and 4.4 (morulae), respectively (P>0.05). 5. As shown in the above results, the higher survival rate was obtained in the treatment of 15% Ficoll than that of 30%. And the survival rate (FDA-test)of the oocytes and 2-4 cell stages of the rat embryos was lower than that of 8~16 cell and morulae stages. It was considered that 8-16 cell and morulae could be available for the successful freezing by vitrification of rat embryos with 15% Ficoll except for oocytes.

• 멤브레인
• /
• 제32권6호
• /
• pp.496-513
• /
• 2022

본 연구에서는 음이온 교환막 수전해 시스템에 적용가능성을 확인하고자 상용 음이온 교환막인 FAA-3-50, Neosepta-ASE, Sustainion grade T, Fujifilm type 10의 관련 물성을 평가하였다. 음이온교환막을 이용하는 특성상 음이온교환기의 확인을 위하여 SEM/EDX를 이용하여 상용막의 모폴로지와 표면의 원소를 분석하여 상용막이 포함하고 있는 작용기의 분포를 확인하였다. 또한, UTM과 TGA를 이용하여 기계적 강도 및 열분해온도를 측정하여 수전해의 구동조건을 만족하는지 확인하였다. 음이온 교환막으로서의 성능을 파악하기 위하여 중요한 특성인 이온교환용량과 이온전도도를 측정하였으며, 알칼리 환경에서 구동되기 때문에 각각의 상용막의 내알칼리성을 확인하기 위한 내구성 테스트를 진행하여 비교하였다. 최종적으로 막-전극 접합체를 제조하여 수전해 single cell test를 진행하여 60℃, 70℃, 80℃의 온도 조건에서 cell 성능을 확인하였고 장기 cell test로 다른 온도에서 20 cycle 측정하여 수전해 성능을 비교하여 상용막의 음이온 교환막 수전해에 적용가능성을 비교하여 확인하였다.

• 에너지공학
• /
• 제21권3호
• /
• pp.249-253
• /
• 2012

본 연구에서는 열충격 시험을 통하여 Cell 레벨에서의 효율저하 특성을 분석하였다. 열충격 시험은 PV모듈의 시험 규격인 KS C IEC-61215를 이용하여 보다 가혹한 조건인 $-40^{\circ}C$에서 $120^{\circ}C$의 조건으로 500사이클을 수행하였다. I-V 측정을 통하여 효율을 분석한 결과, 열충격 시험 전 13.9%에서 열충격 시험 후 11.0%로 효율이 저하 됐으며, 감소율은 20.9%로 나타났다. EL촬영을 통해 표면을 분석한 결과 Ribbon접합부 및 Gridfinger의 손상으로 확인 됐으며, 보다 정확한 효율 저하의 원인을 분석하기 위해 단면분석을 실시한 결과, 표면손상으로 확인 되었던 위치의 Cell 내부에서도 Crack을 확인할 수 있었다. 또한, FF(Fill Factor)값을 분석한 결과 열충격 시험 전 72.3%에서 시험 후 62.0%로 11.8%의 감소율을 보였다. 따라서, 경년 시 나타나는 효율저하는 I-V 특성 곡선의 변화에 따라 병렬저항($R_{SH}$)이 감소하여 Cell자체의 소모전력 증가 및 표면 손상, Cell 내부의 Crack에 기인하여 가속된다고 판단된다.

• Current Photovoltaic Research
• /
• 제8권4호
• /
• pp.114-119
• /
• 2020

In this study, Mitigation of Potential-induced degradation (PID) for PERC solar cells using SiO2 Structure of ARC layer. The conventional PID test was conducted with a cell-level test based on the IEC-62804 test standard, but a copper PID test device was manufactured to increase the PID detection rate. The accelerated aging test was conducted by maintaining 96 hours with a potential difference of 1000 V at a temperature of 60℃. As a result, the PERC solar cell of SiO2-Free ARC structure decreased 22.11% compared to the initial efficiency, and the PERC solar cell of the Upper-SiO2 ARC structure decreased 30.78% of the initial efficiency and the PID reliability was not good. However, the PERC solar cell with the lower-SiO2 ARC structure reduced only 2.44%, effectively mitigating the degradation of PID. Na+ ions in the cover glass generate PID on the surface of the PERC solar cell. In order to prevent PID, the structure of SiNx and SiO2 thin films of the ARC layer is important. SiO2 thin film must be deposited on bottom of ARC layer and the surface of the PERC solar cell N-type emitter to prevent surface recombination and stacking fault defects of the PERC solar cell and mitigated PID degradation.

• 한국융합학회논문지
• /
• 제13권3호
• /
• pp.197-202
• /
• 2022

CZTS 태양전지는 Cu, Zn, Sn, Se, S으로 구성된 흡수층을 사용하는 박막 태양전지로, In, Ga이 사용되는 CIGS 태양전지보다 저렴하며 Pb, Cd이 사용된 페로브스카이트, CdTe 태양전지보다 친환경적이다. 본 연구에서 우리는 유연기판인 Mo foil 위에 제작된 유연 CZTS 태양전지를 지정된 곡률만큼 휘게 하는 bending test를 진행하였다. 태양전지에 압축응력이 가해지는 inner benidng과 인장응력이 가해지는 outer bending의 방향에서 실험은 진행되었으며, 50 mmR의 곡률 반경으로 진행된 1,000 회의 굽힘 횟수 동안 태양전지의 효율은 최고 12.7%까지 감소하였으며, 두 방향 모두에서 효율 감소의 가장 큰 원인은 병렬저항의 큰 감소로 나타났다.

• ETRI Journal
• /
• 제26권6호
• /
• pp.520-534
• /
• 2004

As the density of memories increases, unwanted interference between cells and the coupling noise between bit-lines become significant, requiring parallel testing. Testing high-density memories for a high degree of fault coverage requires either a relatively large number of test vectors or a significant amount of additional test circuitry. This paper proposes a new tiling method and an efficient built-in self-test (BIST) algorithm for neighborhood pattern-sensitive faults (NPSFs) and new neighborhood bit-line sensitive faults (NBLSFs). Instead of the conventional five-cell and nine-cell physical neighborhood layouts to test memory cells, a four-cell layout is utilized. This four-cell layout needs smaller test vectors, provides easier hardware implementation, and is more appropriate for both NPSFs and NBLSFs detection. A CMOS column decoder and the parallel comparator proposed by P. Mazumder are modified to implement the test procedure. Consequently, these reduce the number of transistors used for a BIST circuit. Also, we present algorithm properties such as the capability to detect stuck-at faults, transition faults, conventional pattern-sensitive faults, and neighborhood bit-line sensitive faults.