• 한국임상수의학회지
• /
• 제27권3호
• /
• pp.232-239
• /
• 2010

개에서 자연발생한 유선종양으로부터 채취, 배양된 세포주 2개를 확립하고 특성을 분석하였다. 9세 령의 퍼그 종 개와 동일연령의 토이푸들 종의 개에 발생한 종양을 무균 상태를 유지하여 수술적으로 채취한 후 primary culture를 실시하였다. 두 종양의 조직병리검사에서는 각각 선암종과 혼합암종이 진단되었으며, 이후 두 마리 모두 전이로 인해 폐사하였다. 배양된 종양세포는 1년 이상의 기간 동안 60회 이상 계대를 반복하면서 형태학적으로 일관성을 유지하였고, 특성분석을 위해 광학현미경검사, 성장곡선 산출, 배가 시간 계산, 누드 마우스에 이종이식, 면역조직 화학검사를 실시하였다. 각 세포주는 다각형의 긴 세포형태를 보였으며, 세포질 연결을 형성하였으며, 배가 시간은 각각 47.1 시간과 18.6 시간이었다. 암컷 누드마우스의 등 부위에 피하이식 후 4주 이내에 10마리 중 9마리에서 촉진이 가능한 종괴의 형성이 확인되었으며, 면역조직화학검사 시 한 세포주에서는 keratin과 cytokeratin 8에서 다른 세포주에서는 smooth muscle actin과 cytokeratin 8에서 강한 염색성이 확인되었다. 두 세포주는 개의 유선종양의 시험관내, 체내 연구에 있어 모두 유용하게 사용될 수 있을 것으로 생각된다.

• 한국동물학회:학술대회논문집
• /
• 한국동물학회 1996년도 한국생물과학협회 국제학술대회
• /
• pp.222.2-222
• /
• 1996

No Abstract, See Full Text

• 한국식물학회:학술대회논문집
• /
• 한국식물학회 2000년도 춘계학술발표대회:발표눈문요지록
• /
• pp.18-18
• /
• 2000

• Journal of Mechanical Science and Technology
• /
• 제20권3호
• /
• pp.297-309
• /
• 2006

This paper deals with a novel structure for single-cell characterization which makes use of bimorph micro thermal actuators combined with electrical sensor device and integrated microfluidic channel. The goal for this device is to capture and characterize individual biocell. Quantitative and qualitative characteristics of bimorph thermal actuator were analyzed with finite element analysis methods. Furthermore, optimization for the dimension of cantilevers and integrated parallel probe systems with microfluidic channels is able to be realized through the virtual simulation for actuation and the practical fabrication of prototype of probes. The experimental value of probe deflection was in accordance with the simulated one.

• 한국어병학회지
• /
• 제22권3호
• /
• pp.305-316
• /
• 2009

Haemocyte characterization in the surf clam, Mectra veneriformis was carried out based on morphological, cytochemical, and phagocytic characteristics. The haemocytes were classified into two cell types, granulocytes and agranulocytes on the basis of presence of cytoplasmic granules. Granulocytes were then classified again into 2 types, large eosinophilic granulocytes and small eosinophilic granulocytes after staining with May-Grünwald Giemsa. In electron microscopy, both types of granulocytes contained electron-dense and electron-lucent cytoplasmic granules. Agranulocytes (hyalinocytes) were also divided into two cell types, large agranulocytes and small agranulocytes based on their sizes. Both cell types did not have granules in cytoplasm. Granulocyte and agranulocyte were negative for the enzyme activities of alkaline phosphatase, peroxidase, and $\beta$-glucuronidase but positive for phenoloxidase and acid phosphatase activities. Both types of haemocytes have phagocytic activity, with the exception of small agranulocyte, and granulocytes seemed more active in this respect than agranulocytes. This present study is the first study to characterize haemocytes of M. veneriformis.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2227-2230
• /
• 2008

Crossover of nitrogen from cathode to anode is inevitable in typical membranes used in PEM fuel cells. This crossovered nitrogen accumulates in anode recirculation system and excessive buildup of nitrogen in the recirculating anode gas lowers the hydrogen concentration and finally affects the performance of fuel cell stacks. In this study, characterization of nitrogen gas crossover was investigated in PEM fuel cell stacks. The mass spectroscopy (MS) has been applied to measure the amount of the crossovered nitrogen at the exit of anode. Results show that anode and cathode stoichiometric number ($SR_c$) have a big effect of nitrogen crossover.

• Transactions on Electrical and Electronic Materials
• /
• 제14권3호
• /
• pp.160-163
• /
• 2013

We investigated the effect of light intensity and wavelength of a solar cell device by using photoconductive atomic force microscopy (PC-AFM). The $POCl_3$ diffusion doping process was used to produce a p-n junction solar cell device based on a Poly-Si wafer and the electrical properties of prepared solar cells were measured using a solar cell simulator system. The measured open circuit voltage ($V_{oc}$) is 0.59 V and the short circuit current ($I_{sc}$) is 48.5 mA. Also, the values of the fill factors and efficiencies of the devices are 0.7% and approximately 13.6%, respectively. In addition, PC-AFM, a recent notable method for nano-scale characterization of photovoltaic elements, was used for direct measurements of photoelectric characteristics in local instead of large areas. The effects of changes in the intensity and wavelength of light shining on the element on the photoelectric characteristics were observed. Results obtained through PC-AFM were compared with the electric/optical characteristics data obtained through a solar simulator. The voltage ($V_{PC-AFM}$) at which the current was 0 A in the I-V characteristic curves increased sharply up to 1.8 $mW/cm^2$, peaking and slowly falling as light intensity increased. Here, $V_{PC-AFM}$ at 1.8 $mW/cm^2$ was 0.29 V, which corresponds to 59% of the average $V_{oc}$ value, as measured with the solar simulator. Also, while light wavelength was increased from 300 nm to 1,100 nm, the external quantum efficiency (EQE) and results from PC-AFM showed similar trends at the macro scale, but returned different results in several sections, indicating the need for detailed analysis and improvement in the future.

• 한국재료학회지
• /
• 제28권11호
• /
• pp.680-684
• /
• 2018

We investigate the effect of light intensity and wavelength of a solar cell device using photoconductive atomic force microscopy(PC-AFM). A $POCl_3$ diffusion doping process is used to produce a p-n junction solar cell device based on a polySi wafer, and the electrical properties of prepared solar cells are measured using a solar cell simulator system. The measured open circuit voltage($V_{oc}$) is 0.59 V and the short circuit current($I_{sc}$) is 48.5 mA. Moreover, the values of the fill factors and efficiencies of the devices are 0.7 and approximately 13.6 %, respectively. In addition, PC-AFM, a recent notable method for nano-scale characterization of photovoltaic elements, is used for direct measurements of photoelectric characteristics in limited areas instead of large areas. The effects of changes in the intensity and wavelength of light shining on the element on the photoelectric characteristics are observed. Results obtained through PC-AFM are compared with the electric/optical characteristics data obtained through a solar simulator. The voltage($V_{PC-AFM}$) at which the current is 0 A in the I-V characteristic curves increases sharply up to $18W/m^2$, peaking and slowly falling as light intensity increases. Here, $V_{PC-AFM}$ at $18W/m^2$ is 0.29 V, which corresponds to 59 % of the average $V_{oc}$ value, as measured with the solar simulator. Furthermore, while the light wavelength increases from 300 nm to 1,100 nm, the external quantum efficiency(EQE) and results from PC-AFM show similar trends at the macro scale but reveal different results in several sections, indicating the need for detailed analysis and improvement in the future.

• Transactions on Electrical and Electronic Materials
• /
• 제13권1호
• /
• pp.35-38
• /
• 2012

In this study, we have attempted to characterize the photovoltaic effect in real-time measurement of photoinduced current in a poly-Si-based solar cell using photoconductive atomic force microscopy (PC-AFM). However, the high contact resistance that originates from the metal-semiconductor Schottky contact disturbs the current flow and makes it difficult to measure the photoinduced current. To solve this problem, a thin metallic film has been coated on the surface of the device, which successfully decreases the contact resistance. In the PC-AFM analysis, we used a metal-coated conducting cantilever tip as the top electrode of the solar cell and light from a halogen lamp was irradiated on the PC-AFM scanning region. As the light intensity becomes stronger, the current value increases up to $200{\mu}A$ at 80 W, as more electrons and hole carriers are generated because of the photovoltaic effect. The ratio of the conducting area at different conditions was calculated, and it showed a behavior similar to that generated by a photoinduced current. On analyzing the PC-AFM measurement results, we have verified the correlation between the light intensity and photoinduced current of the poly-Si-based solar cell in nanometer scale.

• Journal of the Korean Physical Society
• /
• 제73권11호
• /
• pp.1794-1798
• /
• 2018

We have grown famatinite $Cu_3SbS_4$ films by using sulfurization of Cu/Sb stack film. Sulfurization at $500^{\circ}C$ produced famatinite $Cu_3SbS_4$ phase, while $400^{\circ}C$ and $450^{\circ}C$ sulfurization exhibited unreacted and mixed phases. The fabricated $Cu_3SbS_4$ film showed S-deficiency, and secondary phase of $Cu_{12}Sb_4S_{13}$. The secondary phase was confirmed by X-ray diffraction, Raman spectroscopy, photoluminescence and external quantum efficiency measurements. We have also fabricated solar cell in substrate type structure, ITO/ZnO/(Zn,Sn)O/$Cu_3SbS_4$/Mo/glass, where $Cu_3SbS_4$ was used as a absorber layer and (Zn,Sn)O was employed as a Cd-free buffer. Our best cell showed power conversion efficiency of 0.198%. Characterization results of $Cu_3SbS_4$ absorber indicates deep defect (due to S-deficiency) and low shunt resistance (due to $Cu_{12}Sb_4S_{13}$ phase). Thus in order to improve the cell efficiency, it is required to grow high quality $Cu_3SbS_4$ film with no S-deficiency and no secondary phase.