• 대한화학회지
• /
• 제34권6호
• /
• pp.561-568
• /
• 1990

수용액에서 가벼운 란탄족 금속이온의 전기화학적 거동을 직류 폴라로그래피, 펄스차이 폴라로그래피 및 순환 전압전류법으로 연구하였다. La$^{3+}$, Pr$^{3+}$ 및 Nd$^{3+}$의 환원은 0.1 M LiCl 지지전해질에서 3전자가 관여하는 비가역적인 반응이었다. Sm$^{3+}$의 환원은 0.1 M TMAI 지지전해질에서 1전자에 이어 2전자가 관여하는 비가역적인 반응이었으며, Eu$^{3+}$의 환원은 0.1 M LiCl 지지전해질에서 1전자에 이어 2전자가 관여하는 유사가역반응 및 비가역반응이었다. 펄스차이 폴라로그래피에 의하면 pH 4 이하에서는 수소이온의 촉매효과에 의하여 가수분해된 란탄족 금속이온 (Ln(OH)$^{2+}$)은 란탄족 금속이온(Ln$^{3+}$)보다 양전위에서 환원되었으며, 봉우리 전류의 크기는 Eu$^{3+}$ < Sm$^{3+}$ < Nd$^{3+}$ < Pr$^{3+}$ < La$^{3+}$ 순으로 증가하였다. 순환 전압전류법에서 주사속도 변화에 대한 전류함수의 크기는 [H$^{+}$]/[Ln$^{3+}$]의 비에 의존하였으며, pH 및 란탄족 금속이온의 농도가 낮을수록 수소이온에 의한 반응 또는 촉매전류가 증가하였다.

• 에너지공학
• /
• 제23권3호
• /
• pp.150-156
• /
• 2014

본 연구는 바나듐 레독스 흐름전지에서 속도 결정단계인 양극 반응($[VO]^{2+}/[VO_2]^+$)을 개선하여 바나듐 반응의 속도를 증가시켜 흐름전지 성능을 향상시키고자 하는 목적으로 진행하엿다. 이를 위해, 다공성 촉매인 CMK3를 사용하여 일반적으로 사용되는 탄소 (Vulcan(XC-72)) 및 상용 Pt/C 촉매 (Johnson-Matthey사 Pt 20wt.%)와 그 성능을 비교하였다. 반응성은 순환주사전류법으로, 구조적 특성은 TEM과 BET&BJH을 이용하여 분석하였다. 또한, 완전지 실험을 통하여 전기화학적으로 나타난 결과가 어떻게 충방전에 적용되는지 확인하였다. 결과, CMK3는 Vulcan(XC-72)보다 6배 향상된 촉매 활성과 2배 이상 향상된 반응가역성이 나타남을 확인하였고, CMK3의 다공성 구조로 인해 Vulcan(XC-72) 보다 큰 표면적을 가지고 있음을 확인하였다. 아울러, CMK3는 백금 촉매가 없음에도, 상용 Pt/C 촉매의 85% 이상의 반응성과 가역성을 나타내었다. 완전지 실험에서 충방전 곡선은 CMK3를 적용한 흐름전지가 오히려 상용 Pt/C 촉매를 적용한 흐름전지보다 좋은 모습을 나타내었다.

• 전기화학회지
• /
• 제11권3호
• /
• pp.176-183
• /
• 2008

본 연구에서는 8족 금속 원소인 osmium을 중심금속으로 4가지의 착물을 합성하였다. 합성한 착물은 ${[Os(bpy)}_2{(ap-im)Cl]}^{+/2+}$, ${[Os(dme-bpy)}_2{(ap-im)Cl]}^{+/2+}$, ${[Os(dmo-bpy)}_2{(ap-im)Cl]}^{+/2+}$, ${[Os(dcl-bpy)}_2{(ap-im)Cl]}^{+/2+}$이다. 합성된 착물을 순환전압전류법을 포함한 다양한 전기화학분석방법을 이용하여 전기적 성질을 조사하여 작용기에 따른 전위의 변화를 다음의 전위구간에서 $E_p$:$-0.06\;V{\sim}0.313\;V$ vs. Ag/AgCl 확인하였다. 합성한 화합물을 전기적 흡착방법으로 고정된 금나노입자(gold nano-particles)를 전극 위에 자기조립방식으로 고정화를 시켰다. 당과 당 분해효소(Glucose Oxidase, GOx)에 의한 촉매반응의 전류를 확인하였고, glucose농도에 따른 변화하는 전류의 양도 확인하였다. 마지막으로 고정된 4가지의 osmium complex는 서로 다른 전위로 인하여 촉매전류의 양이 달라지는 것을 알 수 있었고, 이로 인해 redox complex의 전위가 촉매반응에 미치는 영향을 확인 할 수 있었다.

• 분석과학
• /
• 제29권1호
• /
• pp.35-42
• /
• 2016

A new nano-composite carbon ink for the development of disposable dopamine (DA) biosensors based on screen-printed carbon electrodes (SPCEs) is introduced. The method developed uses SPCEs coupled with a tyrosinase modified nano-composite carbon ink. The ink was prepared by an “in-house” procedure with reduced graphene oxide (rGO), Pt nanoparticles (PtNP), and carbon materials such as carbon black and graphite. The rGO-PtNP carbon composite ink was used to print the working electrodes of the SPCEs and the reference counter electrodes were printed by using a commercial Ag/AgCl ink. After the construction of nano-composite SPCEs, tyrosinase was immobilized onto the working electrodes by using a biocompatible matrix, chitosan. The composite of nano-materials was characterized by X-ray photoelectron spectroscopy (XPS) and the performance characteristics of the sensors were evaluated by using voltammetric and amperometric techniques. The cyclic voltammetry results indicated that the sensors prepared with the rGO-PtNP-carbon composite ink revealed a significant improvement in electro-catalytic activity to DA compared with the results obtained from bare or only PtNP embedded carbon inks. Optimum experimental parameters such as pH and operating potential were evaluated and calibration curves for dopamine were constructed with the results obtained from a series of amperometric detections at −0.1 V vs. Ag/AgCl. The limit of detection was found to be 14 nM in a linear range of 10 nM to 100 µM of DA, and the sensor’s sensitivity was calculated to be 0.4 µAµM⁻¹cm⁻².

• 한국재료학회지
• /
• 제21권3호
• /
• pp.180-185
• /
• 2011

This study is aimed to increase the activity of cathodic catalysts for PEMFCs(Polymer Electrolyte Membrane Fuel Cells). we investigated the temperature effect of 20wt% Pt/C catalysts at five different temperatures. The catalysts were synthesized by using chemical reduction method. Before adding the formaldehyde as reducing agent, process was undergone for 2 hours at the room temperature (RT), $40^{\circ}C$, $60^{\circ}C$, $80^{\circ}C$ and $100^{\circ}C$, respectively. The performances of synthesize catalysts are compared. The electrochemical oxygen reduction reaction (ORR) was studied on 20wt% Pt/C catalysts by using a glassy carbon electrode through cyclic voltammetric curves (CV) in a 1M H2SO4 solution. The ORR specific activities of 20wt% Pt/C catalysts increased to give a relative ORR catalytic activity ordering of $80^{\circ}C$ > $100^{\circ}C$ > $60^{\circ}C$ > $40^{\circ}C$ > RT. Electrochemical active surface area (EAS) was calculated with cyclic voltammetry analysis. Prepared Pt/C (at $80^{\circ}C$, $100^{\circ}C$) catalysts has higher ESA than other catalysts. Physical characterization was made by using X-ray diffraction (XRD) and transmission electron microscope (TEM). The TEM images of the carbon supported platinum electrocatalysts ($80^{\circ}C$, $100^{\circ}C$) showed homogenous particle distribution with particle size of about 2~3.5 nm. We found that a higher reaction temperature resulted in more uniform particle distribution than lower reaction temperature and then the XRD results showed that the crystalline structure of the synthesized catalysts are seen FCC structure.

• 한국재료학회지
• /
• 제18권11호
• /
• pp.583-591
• /
• 2008

In this study, two series of CNT/$TiO_2$ electrodes were prepared. The decrease of surface area compared with that of the pristine carbon nanotubes (CNTs) indicated the blocking of micropores on the surface of the CNTs; was further supported by scanning electron microscopy (SEM) and field emission SEM (FE-SEM) observations. The X-ray diffraction (XRD) results showed that the CNT/$TiO_2$ composites contained a mix of anatase and rutile forms of $TiO_2$ particles when the precursor was $TiO_2$ powder, whereas when the precursor was Ti ($OC_4H_7$) (TNB), the composites contained only the typical single and clear anatase $TiO_2$ particles. The energy dispersive X-ray spectroscopy (EDX) spectra showed the presence of C, O and Ti peaks for all samples. It was found that catalytic decomposition of methylene blue (MB) solution could be attributed to synthetic effects between the $TiO_2$ photocatalysis and electro-assisted CNTs network, and that photoelectrocatalytic oxidation increased with an increase of CNT composition. It was also found that the photoelectrocatalytic oxidation efficiency for MB is higher than that of photocatalytic oxidation. Moreover, the CNT/$TiO_2$ composites catalyst prepared by the impregnation method demonstrates higher photoelectrocatalytic activity than the mechanical mixture with the same CNT content.

• Carbon letters
• /
• 제6권1호
• /
• pp.41-46
• /
• 2005

Plasma carbon blacks of 20~30 nm diameter were synthesized by direct decomposition of natural gas using a hybrid plasma torch system with 50 kW direct current and 4 MHz of radio frequency. The insulating rector which inside diameter of 400 mm and length of 1500 mm, respectively was kept at 300~$400^{\circ}C$ during the preparation. The ultimate analysis of plasma carbon blacks reveals that the raw plasma carbon blacks contains a large quantity of volatile which is mainly consist of hydrogen. Therefore devolatilization of raw plasma carbon blacks were carried out at $900^{\circ}C$ for one hour under nitrogen atmosphere. The devolatilization leads to the decrease in electrical resistivity and surface oxygen functional groups of plasma carbon black significantly. In order to investigate the plasma carbon as a catalyst support, devolatilized plasma black at $900^{\circ}C$ (DPB) supported PtAu catalyst was synthesized by sodium boronhydride reduction method. Electrochemical measurements and direct formic acid fuel cell test indicated that catalytic activity of DPB supported PtAu catalyst for formic acid oxidation was similar to that of Vulcan XC-72 of commercial carbon black supported one.

• 한국재료학회지
• /
• 제21권8호
• /
• pp.419-424
• /
• 2011

Pt nanoparticle catalysts incorporated on $RuO_2$ nanowire support were successfully synthesized and their electrochemical properties, such as methanol electro-oxidation and electrochemically active surface (EAS) area, were demonstrated for direct methanol fuel cells (DMFCs). After fabricating $RuO_2$ nanowire support via an electrospinning method, two different types of incorporated Pt nanoparticle electrocatalysts were prepared using a precipitation method via the reaction with $NaBH_4$ as a reducing agent. One electrocatalyst was 20 wt% Pt/$RuO_2$, and the other was 40 wt% Pt/$RuO_2$. The structural and electrochemical properties of the Pt nanoparticle electrocatalysts incorporated on electrospun $RuO_2$ nanowire support were investigated using a bright field transmission electron microscopy (bright field TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and cyclic voltammetry. The bright field TEM, XRD, and XPS results indicate that Pt nanoparticle electrocatalysts with sizes of approximately 2-4 nm were well incorporated on the electrospun $RuO_2$ nanowire support with a diameter of approximately 50 nm. The cyclic voltammetry results showed that the Pt nanoparticle catalysts incorporated on the electrospun $RuO_2$ nanowire support give superior catalytic activity in the methanol electro-oxidation and a higher electrochemically active surface (EAS) area when compared with the electrospun Pt nanowire electrocatalysts without the $RuO_2$ nanowire support. Therefore, the Pt nanoparticle catalysts incorporated on the electrospun $RuO_2$ nanowire support could be a promising electrode for direct methanol fuel cells (DMFCs).

• 한국분말재료학회지
• /
• 제23권2호
• /
• pp.95-101
• /
• 2016

Carbon nanofiber (CNF) composites coated with spindle-shaped $Fe_2O_3$ nanoparticles (NPs) are fabricated by a combination of an electrospinning method and a hydrothermal method, and their morphological, structural, and chemical properties are measured by field-emission scanning electron microscopy, transmission electron microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy. For comparison, CNFs and spindle-shaped $Fe_2O_3$ NPs are prepared by either an electrospinning method or a hydrothermal method, respectively. Dye-sensitized solar cells (DSSCs) fabricated with the composites exhibit enhanced open circuit voltage (0.70 V), short-circuit current density ($12.82mA/cm^2$), fill factor (61.30%), and power conversion efficiency (5.52%) compared to those of the CNFs (0.66 V, $11.61mA/cm^2$, 51.96%, and 3.97%) and spindle-shaped $Fe_2O_3$ NPs (0.67 V, $11.45mA/cm^2$, 50.17%, and 3.86%). This performance improvement can be attributed to a synergistic effect of a superb catalytic reaction of spindle-shaped $Fe_2O_3$ NPs and efficient charge transfer relative to the one-dimensional nanostructure of the CNFs. Therefore, spindle-shaped $Fe_2O_3$-NP-coated CNF composites may be proposed as a potential alternative material for low-cost counter electrodes in DSSCs.

• Bulletin of the Korean Chemical Society
• /
• 제31권11호
• /
• pp.3109-3114
• /
• 2010

Flexible composite films of $V_2O_5$ and conductive polypyrrole ($V_2O_5$/PPy) were grown by facile electrochemical polymerization, wherein an anodization potential was applied to the substrate electrode in an electrolyte solution containing pyrrole monomer and dispersed $V_2O_5$ particles. The coating of polypyrrole (PPy) on the surface of $V_2O_5$ particles was induced by the oxidative catalytic action of $V_2O_5$ during the electrochemical polymerization of pyrrole. PPy in the composite film connects the isolated $V_2O_5$ particles. This results in the formation of conductive networks in the composite film cathode, thereby enhancing the Li+ ion diffusion to the surface of the isolated $V_2O_5$ particles and thus increasing the accessibility of the $Li^+$ ions. The specific capacity tests of the Li rechargeable batteries revealed that the discharge capacity of this composite film cathode was higher, i.e., $497\;mAhg^{-1}$, than that of $V_2O_5$/PPy powder or pristine $V_2O_5$.