• Microbiology and Biotechnology Letters
• /
• v.23 no.6
• /
• pp.702-709
• /
• 1995

Degradation Of $\kappa $-carrageenan-based film by microorganisms screened from carrageenan source and activated sludge of a carrageenan producing factory was investigated by measuring changes of pH, viscosity, total sugar and total organic carbon (TOC) of the medium containing $\kappa $-carrageenan as a carbon source. Initially fifteen strains of microorganism were isolated from carrageenan source and activated sludge and then three organisms among them were selected based on the ability of growing in the medium including 0.3% $\kappa $-carrageenan as a sole carbon source. They were identified as Escherichia coli, Saccharomyces cerevisiae and Aspergillus niger. As indices of biodegradability Of $\kappa $-carrageenan based film, the changes of pH, viscosity, total sugar, and TOC of the carrageenan film-based medium were tested by the cultivation of single or mixed strains of the identified organisms. Mixed culture showed the highest biodegradability, which resulted in the changes of pH from 6.5 to 3.0, viscosity from 164 cps to 15.6 cps, total sugar content from 2.35 g/l to 0.53 g/l and TOC from 5721 ppm to 232 ppm after 30 days of cultivation. The biodegradability determined as the reduction rate of TOC by pure cultures of Asp. niger, E. coli, Sacch. cerevisiae and mixed culture of the three organisms were 94%, 86%, 80% and 96%, respectively.

• Korean Journal of Food Science and Technology
• /
• v.30 no.4
• /
• pp.855-861
• /
• 1998

Composite films based on ${\kappa}-carrageenan$ and chitosan were prepared, and tensile strength (TS), elongation (E), and water vapor permeability (WVP) of the films were measured. The molecular weight of ${\kappa}-carrageenan$ and chitosan was measured by a light-scattering instrument and was $5.1{\times}10^5,{\;}and{\;}1.71{\times}10^5$, respectively. TS of ${\kappa}-carrageenan$ and chitosan free film was 30.2 MPa and 21.0 MPa, respectively. TS of composite film was not related to the amount of the ascorbic acid. E of composite film was lower than those of the free films of ${\kappa}-carrageenan$ and chitosan. WVP of composite film was lower than that of chitosan film and was similar to WVP of ${\kappa}-carrageenan$ film.

• Korean Journal of Food Science and Technology
• /
• v.29 no.6
• /
• pp.1184-1190
• /
• 1997

Corn zein coated carrageenan films were manufactured by immersing preformed ${\kappa}-carrageenan$ films into solution of different concentrations of corn zein (CZ) solids (10, 20, and 30% in 95% ethyl alcohol) with polyethylene glycol (20% w/w of CZ), glycerol (24% w/w of CZ). For all types of films, water vapor permeability (WVP), water solubility (WS), swelling ratio (SR), tensile strength (TS), percent elongation at break (E), heat sealing strength (HS), and Hunter color values (L, a, and b) were determined. WVP of corn zein coated ${\kappa}-carrageenan$ films decreased significantly (p<0.05) as the concentration of com zein increase. Coating with corn zein also decreased film WS and SR linearly with the concentration of corn zein. TS of corn zein coated carrageenan films decreased linearly with corn zein concentration. All the com rein coated carrageenan films showed heat sealing properties even though their sealing strength was less than half of corn zein film. Obviously corn zein coating affected color of ${\kappa}-carrageenan$ films, which was mainly caused by increase in yellowness (Hunter b-value).

• Journal of Microbiology and Biotechnology
• /
• v.11 no.2
• /
• pp.193-198
• /
• 2001

Preparation of antibacterial biopolymer film which is suitable for food packaging film was investigated using K-carrageenan as a base material. K-Carrageenan showed good biodegradability and film-forming characteristic but poor mechanical properties under humid condition. Also, various bacteria grew well on its surface. The poor mechanical properties could be improved by mixing with alginate at a 1:1 ratio and crosslinking with $CaCl_2$ solution. Antibacterial property coul be provided by modifying the K-carrageenan film surface with acrylic acid plasma followed by ion-exchange with $Ag^+$ ions. Such prepared film still showed good biodegradability by various fongi.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.26 no.3
• /
• pp.125-131
• /
• 2020

Carrageenan-based functional films were prepared by adding two different types of sulfur nanoparticles (SNP) synthesized from sodium thiosulfate (SNPSTS) and elemental sulfur (SNPES). The films were characterized using Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction spectroscopy (XRD), and thermal gravimetric analysis (TGA). Also, film properties such as UV-visible light transmittance, water contact angle (WCA), water vapor permeability (WVP), mechanical properties, and antibacterial activity were evaluated. SNPs were uniformly dispersed in the carrageenan matrix to form flexible films. The addition of SNP significantly increased the film properties such as water vapor barrier and surface hydrophobicity but did not affect the mechanical properties. The carrageenan/SNP composite film showed some antibacterial activity against foodborne pathogenic bacteria, L. monocytogenes and E. coli.

• Korean Journal of Food Science and Technology
• /
• v.30 no.2
• /
• pp.379-384
• /
• 1998

Biodegradable carrageenan films and carrageenan-coated papers were developed and their characteristics of lipid permeation was investigated for possible substitution of PE-coated papers used in packaging of oily or greasy foods. Both carrageenan coated papers and free carrageenan films were highly resistant to lipid penetration. Among the carrageenans tested, ${\kappa}-carrageenan$ film showed the most resistant followed by ${\lambda}-$ and i-carrageenan films. The resistance to lipid increased as the thickness of ${\kappa}-carrageenan$ layer increased. Carrageenan coated papers with $4\;and\;5\;kg/ream\;(278m^2)$ showed the lipid resistance comparable to that of the PE-coated paper. Free films also showed the same trends of the lipid resistance as the carrageenan coated papers, but the degree of lipid resistance was approximately ten times higher than that of carrageenan coated paper. Degree of lipid penetration of carrageenan films and carrageenan-coated papers increased exponentially against time. ${\kappa}-carrageenan$ coated papers over 4 kg/ream showed to have an adequate lipid barrier property for being utilized for packaging greasy food products.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.5 no.1
• /
• pp.6-12
• /
• 1999

This study was conducted to investigate the application of edible films to Raymyun soup packaging. The sorption isotherm curve and BET monolayer moisture content of Raymyun soup were estimated as a basic experiment. Also, the mechanical properties, water vapor permeability, and solubility of the films were investigated. Methylcellulose, sodium caseinate, and K-carrageenan films were used as edible films and glycerol and polyethylene glycol(MW 400) were used as plasticizers. In case tensile strength, methylcellulose films was 68.56 MPa and sodium caseinate film was 7.11 MPa. The elongations of sodium caseinate, methylcellulose, and K-carrageenan film were 115.41%, 23.79% and 0.60%, respectively. The water vapor permeabilties values of methylcellulose, sodium caseinate, and K-carrageenan film between 50% and 70% RH were $0.25-0.38ng{\cdot}m/m^2{\cdot}sec{\cdot}Pa,\;0.62-0.84ng{\cdot}m/m^2{\cdot}sec{\cdot}Pa\;and\;0.31-0.55ng{\cdot}m/m^2{\cdot}sec{\cdot}Pa$, respectively. For the solubility of films, sodium caseinate film showed the highest solubility and methylcellulose film showed the lowest solubility.

• Korean Journal of Food Science and Technology
• /
• v.29 no.2
• /
• pp.390-393
• /
• 1997

${\kappa}-Carrageenan-based$ film prepared by mixing 2% ${\kappa}-carrageenan$, 0.1% KCl, 0.75% polyethylene glycol, and 0.75% glycerol was examined to be used as a potential packaging material for mackerel mince for preventing moisture loss and lipid oxidation. Mackerel mince patties were vacuum-packaged with the film and stored at $20^{\circ}C,\;10^{\circ}C,\;0^{\circ}C,\;and\;-15^{\circ}C$; nonpackaged patties were also stored at $0^{\circ}C$. Weight reduction, peroxide value (PV), and thiobarbituric acid (TBA) value were measured during storage. The packaged or nonpackaged samples stored at $20^{\circ}C,\;10^{\circ}C,\;and\;0^{\circ}C$ showed a 60% weight reduction between 2 and 15 days of storage, while the weight reduction of the samples stored at $-15^{\circ}C$ was about 3% after 25 days. The nonpackaged samples stored at $0^{\circ}C$ showed a steady increase in lipid oxidation with the PV reaching 23 mequivalent peroxide (PO)/㎏ on day 20 and with the TBA value at 0.4 mole malonaldehyde (MA)/g on day 5. The PV and TBA values of the samples vacuum-packaged with the carrageenan-based film were below 2 mequivalent PO/㎏ and below 0.1 mole MA/g, respectively, regardless of storage temperature throughout the storage of 28 days.

• Korean Journal of Food Science and Technology
• /
• v.28 no.3
• /
• pp.545-551
• /
• 1996

Water-vapor transmission rate and water-vapor permeability of carrageenan-based edible film with three different thicknesses of 0.05, 0.08 and 0.11 mm were measured to investigate the potential applicability of the films to powder foods at five different temperatures (20, 25, 30. 35 and $4^{\circ}C$) and three different relative humidities (50. 70 and 90% RH). Water-vapor transmission rate of the carrageenan-based film was gound to be 2.3 times higher than that of polyethylene (PE) film and water-vapor permeability of the film was 45-230 times higher than that of PE film. Water-ydpor permeability of the film seemed to increase linearly with the film thicknees like other hydrophilic edible films. Water-vapor transmission rate were found to be dependent on the temperature. Activation energies of the water-vapor transmission rate of the film were found to be between 7.898 and 12.8702 kj/mol depending on the film thickness. The water-vapor transmission rate of the film showed the typical kinetic compensation effect between activation energies and preexponential factors. which was proved by the linear increase in the value of logarithms of preecponential factor.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.1 no.1
• /
• pp.38-50
• /
• 1995

Tensile strength (TS) of ${\kappa}-carrageenan$ films without salt was 22-32 MPa and was the highest among ${\kappa},\;{\lambda}\;and\;{\iota}-carrageenan$ films. ${\kappa}-carrageenan$ films had high mechanical barrier properties as they are compared with TS of polyethylene films which are 13-28 MPa. TS of ${\iota}-carrageenan$ films without salt was 5-9 MPa and was the lowest among the films. Mechanical properties (TS and elongation) were affected by the concentration of plasticizers. Especially, elongation of ${\kappa}-carrageenan\;and\;{\iota}-carrageenan$ drastically increased as the concentration of plasticizer increased. Mechanical properties (TS and elongation) were greatly affected by various concentration and kind of salts. TS of Film-A (0.375 g plasticizer/g carrageenan) of ${\kappa}-carrageenan$ films which contains 0.1% (w/w) potassium chloride increased to 45 MPa which was the highest among the TS of biopolymer films which have been developed.