• Korean Chemical Engineering Research
• /
• 제49권6호
• /
• pp.697-703
• /
• 2011

축전식 탈염(CDI)은 높은 비표면적을 갖는 전극에 전기화학적 원리로 이온을 흡착하여 제거하는 기술이다. CDI 기술은 낮은 전위에서 작동하기 때문에 에너지 소비가 작고, 전극을 재생할 때 산, 염기 혹은 염을 사용하지 않기 때문에 환경친화적인 기술이다. 본 연구에서 우리는 CDI 기술의 동향을 알아보기 위해 특허와 논문을 조사했다. 데이터베이스는 WIPS와 Scopus를 사용하여 얻었으며 전극기술, 모듈기술 및 응용기술에 따라 조사되었다. CDI의 기술 동향은 연도별, 국가별, 출원인별, 기술별로 조사되었다.

• 전기의세계
• /
• 제21권3호
• /
• pp.31-40
• /
• 1972

This study intends to investigate the optimal switching modes of a double-capacitive thermal system under different constraints on the state and the control variable, by the application of the Pontryagin's Minimum Principle. Throughout the development, the control effort is assumed to have two modes of state: M or zero and the terminal times being fixed. In the first part of this study, the Principle is discussed under various conditions for this particular problem, with different criterion functions and in the same time imposing a certain constraints; i) on the terminal states, ii) on functions of the terminal states. Depending upon the upper bound value of the control vector, possible driving modes of the states are studied from which particular optimal driving modes are extracted so as to meet the specified constraints and boundary conditions imposed in the problem. Numerical solutions are evaluated for an over0damped, double-capacitive thermal plant and the optimal solutions: the switching mode, the optimal switching time, and the control effort are compared with the analytical results, in the second part of this work, to confirm the development.

• 로봇학회논문지
• /
• 제11권3호
• /
• pp.140-145
• /
• 2016

In this paper, we fabricate arrayed-type flexible capacitive touch sensor using liquid metal (LM) droplets (4 mm spatial resolution). Poly-4-vinylphenol (PVP) layer is used as a dielectric layer on the electrode patterned Polyethylene naphthalate (PEN) film. Bonding tests between hydroxyl group (-OH) on the PVP film and polydimethylsiloxane (PDMS) are conducted in a various $O_2$ plasma treatment conditions. Through the tests, we can confirm that non-$O_2$ plasma treated PVP layer and $O_2$ plasma treated PDMS can make a chemical bond. To measure dynamic range of the device, one-cell experiments are conducted and we confirmed that the fabricated device has a large dynamic range (~60 pF).

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제11권1호
• /
• pp.23-32
• /
• 2011

A 40 fJ/c-s, 1 V, 10-bit SAR ADC is presented for energy constrained wearable body sensor network application. The proposed 10-bit dual sampling capacitive DAC topology reduces switching energy by 62% compared with 10-bit conventional SAR ADC. Also, it is more robust to capacitor mismatch than the conventional architecture due to its cancelling effect of each capacitive DAC. The proposed SAR ADC is fabricated in 0.18 ${\mu}m$ 1P6M CMOS technology and occupies 1.17 $mm^2$ including pads. It dissipates only 1.1 ${\mu}W$ with 1 V supply voltage while operating at 100 kS/s.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.476-477
• /
• 2007

This paper described the partial discharge (PD) measurement techniques for diagnosing gas-insulated switches in overhead power distribution system. A capacitive voltage probe to detect PD pulse was designed and fixed on the surface of a bushing. We also designed a coupling network to attenuate AC voltage by 270 dB, and a low-noise amplifier having the gain of 40 dB and 500 kHz~20 MHz 3 dB. From the calibration, it was calculated that the sensitivity of the measurement system was 0.94mV/pC. In the application experiment, we could measure a PD pulse of 45 pC.

• 한국전기전자재료학회논문지
• /
• 제21권1호
• /
• pp.85-89
• /
• 2008

An objective of this paper is to develop a partial discharge (PD) measurement device for monitoring gas insulated switches installed in power distribution system. A capacitive voltage probe was studied and designed to detect PD pulse without an electrical connection. The PD measurement device consists of the capacitive voltage probe attached outside of a bushing, a coupling network which attenuates AC voltage by 270 dB, and a low noise amplifier with the gain of 40 dB in ranges of 500 kHz${\sim}$20 MHz. The sensitivity of the prototype device calculated by a calibrator was 1.98 m V /pc. An application experiment was carried out in a 25.8 kV gas insulated switch and the peak pulse of 76.7 pC was detected. From the experimental results, it is expected that the PD measurement device can be applied to online monitoring system of gas insulated switches.

• Journal of Electrical Engineering and Technology
• /
• 제4권1호
• /
• pp.123-130
• /
• 2009

The partial discharge (PD) measurement is a very effective method to assess the winding insulation condition of high-voltage machines, since most of the insulation failure processes are directly or indirectly caused by PD. On-line PD measurements, which can detect insulation defects of winding in the early stages on rotating machines in operation, have been accepted as the most important technique. The epoxy mica capacitive coupler is currently and extensively used for on-line detection of PD pulses of high-voltage rotating machines. To evaluate the feasibility of developing a capacitive coupler that is easier to manufacture at a lower cost compared to epoxy mica couplers, a 100pF capacitive coupler made of ceramic material is designed, fabricated and tested for on-line PD measurements of 23 kV electrical machines. A series of electrical tests and accelerated aging tests are performed on the ceramic coupler to evaluate the performance requirements, long-term reliability and thermal stability for in field application. The test results show that the newly developed ceramic coupler provides equal and improved performance at a lower cost compared to epoxy mica couplers, and estimated voltage life is anticipated to surpass 100 years.

• Journal of Advanced Marine Engineering and Technology
• /
• 제36권1호
• /
• pp.149-156
• /
• 2012

본 논문에서는 기존의 PACD (Periodically Arrayed Capacitive Devices) 선로구조가 가지는 고 손실 특성의 문제점을 개선하기 위하여, 단파장 특성이 있는 Inverted PACD 구조를 제안하였다. Inverted PACD 선로구조의 손실특성은 종래의 PACD 구조와 비교하여 훨씬 개선되었으며, 구체적으로 ${\lambda}$/4의 길이를 가지는 Inverted PACD 선로구조의 손실특성은 4GHz에서 0.41dB이다. 그리고 상기 Inverted PACD 선로구조는 종래의 마이크로스트립 선로보다 단파장 특성을 보여주었으며, 구체적으로 종래의 전송선로 파장의 11.85%로 파장이 대폭 축소되었다. MMIC용 초소형 수동소자로서의 응용가능성을 제시하기 위하여, Inverted PACD 선로구조를 이용하여 GaAs MMIC상에 임피던스 변환기를 제작 및 측정하였다. 그 결과 Inverted PACD 선로구조를 이용하여 제작한 임피던스 변환기의 크기는 0.012 $mm^2$이며, 종래의 임피던스 변환기 크기의 1.7%의 면적을 차지하였다. 상기 임피던스 변환기는 2.25~6.5GHz 대역에서 -10dB 이하 반사손실과 -1dB이하의 삽입손실 등 양호한 RF 특성을 보여주었다.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2022년도 춘계학술발표대회
• /
• pp.137-138
• /
• 2022

1. 생체 인증만을 이용하여 인증절차를 구성하여 장점을 극대화 한다. 2. 사용자를 인증하는 새로운 인증 방법을 고안하고, 융합 할 수 있다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제36권1호
• /
• pp.157-165
• /
• 2012

본 연구에서는 MMIC 상에서 온칩용 수동소자의 개발을 위해서, 주기적으로 배치된 용량성 소자를 이용한 단파장 전송선로를 연구하였다. PACD 구조의 전송선로는 기존의 마이크로스트립 전송선로에 비해, 단파장 특성과 낮은 특성 임피던스를 나타내었다. PACD 구조의 전송선로 구조는 기존의 마이크로스트립 전송선로 파장의 8%의 파장 단축효과를 나타낸다. MMIC 상에서의 온칩용 수동소자로서의 적합성을 판단하기 위하여 이론적으로 PACD 선로구조의 손실특성, 유효유전율, 전파상수, 대역폭 등의 기본 특성을 분석하였다. 위의 결과들을 통하여 PACD 구조의 전송선로는 MMIC 상에서 온칩용 수동소자로서의 특성에 효과적임을 알 수 있다.