• 대한전자공학회논문지SP
• /
• 제45권6호
• /
• pp.125-132
• /
• 2008

감시 및 로보트 분야 등에서 다양하게 사용되는 전방향(omnidirectional) 카메라 시스템은 넓은 시야각을 제공한다. 전방향 카메라의 사영모델과 외부변수를 추정하는 대부분의 기존 연구에서는 사전에 설정된 영상 간의 대응관계를 가정한다. 본 논문에서는 두 장의 전방향 영상으로부터 투영곡선을 자동으로 정합하여 카메라의 외부변수를 추정하는 새로운 알고리즘이 제안된다. 먼저 두 영상에서 대응되는 특징점으로부터 에피폴라 구속조건을 계산하여 초기 카메라 변수를 계산한다. 검출된 특징점과 투영곡선을 대상으로 능동적(active) 정합방법으로 대응관계를 결정한다. 최종 단계에서 대응 투영곡선을 구성하는 양 끝점의 에피폴라(epipolar) 평면과 3차원 벡터의 각도 오차를 최소화하는 카메라 변수를 추정한다. 합성영상과 어안렌즈(fisheye lens)로 취득된 실제 영상을 대상으로 제안된 알고리즘이 기존 방법에 비해 카메라의 외부변수를 정확하게 추정함을 확인하였다.

• 한국컴퓨터정보학회논문지
• /
• 제14권6호
• /
• pp.41-49
• /
• 2009

본 논문에서는 광학식 모션캡처 장비를 위한 다중 카메라 보정 방법을 제안한다. 이 방법은 DLT(Direct linear transformation) 알고리즘을 이용하여 7개의 마커가 있는 3축 보정틀의 영상을 획득하여 1차 카메라 보정을 한다. 그리고 2개의 마커가 있는 보정봉을 측정하고자 하는 영역에서 움직여서 2차 카메라 보정을 실시한다. 1차 카메라 보정에서는 카메라 보정뿐만 아니라 렌즈 왜곡 계수를 계산하여 2차 카메라 보정에서의 최적화를 위한 초기해로 사용한다. 2차 카메라 보정에서는 보정봉에 있는 마커사이의 거리가 일정하기 때문에 계산된 마커 거리와 실제 마커 거리의 차가 최소화 되도록 최적화를 수행한다. 제안한 방법에 의한 다중 카메라 보정 방법을 검증하기 위하여 재투영에러를 계산하였고 3축 보정틀에 있는 마커사이의 거리와 보정봉에 있는 마커사이의 거리를 계산하여 다른 상용장비의 값과 비교하였다. 3축 보정틀에 있는 마커를 복원하여 에러를 비교한 결과 평균오차가 상용장비의 1.7042mm에 비해 0.8765mm로 51.4% 수준으로 나타났고, 보정봉에 있는 마커를 복원하여 에러를 비교한 결과 상용장비의 평균에러 1.8897mm에 비해 2.0183mm로 0.1286mm 크게 나타났다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2019년도 학술발표회
• /
• pp.155-155
• /
• 2019

The Agricultural Policy/Environmental eXtender (APEX) models have been developed for assessing agricultural management efforts and their effects on soil and water at the field scale as well as more complex multi-subarea landscapes, whole farms, and watersheds. National Academy of Agricultural Sciences, Wanju, Korea, has modified a key component of APEX application, named APEX-Paddy for simulating water quality with considering appropriate paddy management practices, such as puddling and flood irrigation management. Calibration and validation are an anticipated step before any model application. Simple techniques are essential to assess whether or not a parameter should be adjusted for calibration. However, very few study has been done to evaluate the ability of APEX-Paddy to simulate the impact of multiple management scenarios on nutrients loss. In this study, the observation data from experimental fields at Iksan in South Kora was used in calibration and evaluation process during 2013-2015. The APEX auto- calibration tool (APEX-CUTE) was used for model calibration and sensitivity analysis. Four quantitative statistics, the coefficient of determination ($R^2$),Nash-Sutcliffe(NSE),percentbias(PBIAS)androotmeansquareerror(RMSE)were used in model evaluation. In this study, the hydrological process of the modified model, APEX-Paddy, is being calibrated and tested in predicting runoff discharge rate and nutrient yield. Field-scale calibration and validation processes are described with an emphasis on essential calibration parameters and direction regarding logical sequences of calibration steps. This study helps to understand the calibration and validation way is further provided for applications of APEX-Paddy at the field scales.

• 한국정보통신학회논문지
• /
• 제22권2호
• /
• pp.261-269
• /
• 2018

본 논문은 플렌옵틱 영상에 CCD 카메라 모델을 적용하여 플렌옵틱 카메라의 내부 파라미터를 구하는 편리한 방법을 제안한다. 플렌옵틱 카메라 캘리브레이션에 사용되는 영상은 일반적으로 CCD 카메라 캘리브레이션에서 사용하는 체크보드패턴을 사용한다. CCD 카메라 모델에 기반 하여 플렌옵틱 카메라 모델의 행렬식을 구하고 이를 통해 초점거리, 주점, 베이스라인, 가상카메라와 물체사이의 거리를 나타내는 4가지 방정식을 공식화한다. 그리고 비선형 최적화 기법을 수행하여 방정식의 해를 찾는다. 구해진 추정치는 실제 매개 변수와 비교하고 구해진 파라미터를 이용해 재 투영 오차율을 구한다. 실험 결과 제안한 방법을 통해 구한 매개 변수는 실제와 매우 유사한 값을 가지며 재투영 오차율은 수용할 수 있는 정도로 나타난다.

• 한국전자통신학회논문지
• /
• 제8권12호
• /
• pp.1923-1932
• /
• 2013

본 논문에서는 광각 카메라로 촬영한 영상에서 생기는 영상의 왜곡 문제를 해결하기 위하여, 카메라 모델의 추정과 검증을 통하여 광각 카메라 영상에서의 방사형 왜곡을 보정하는 방법을 제안한다. 먼저, 교정 패턴으로부터 렌즈의 초점 거리와 주점의 위치 등으로 구성된 내부 파라미터와 회전과 위치 정보로 구성된 외부 파라미터를 찾음으로써 카메라의 왜곡 모델을 추정한다. 다음으로, 추정된 카메라 모델로부터 역으로 코너점을 다시 추출하여 검증하고, 마지막으로, 검증된 카메라 모델을 이용하여 영상의 왜곡을 보정한다. 일반 웹 카메라와 광각 카메라로부터 격자 모양의 교정 패턴을 촬영한 영상을 이용하여 방사형 왜곡을 보정하는 실험을 수행한 결과, 제안된 방법이 80% 이상의 개선 성능을 보임을 확인하였다.

• 한국해양공학회지
• /
• 제36권4호
• /
• pp.251-269
• /
• 2022

The process-based XBeach model has numerous empirical parameters because of insufficient understanding of hydrodynamics and sediment transport on the nearshore; hence, it is necessary to calibrate parameters to apply to various study areas and wave conditions. Therefore, the calibration process of parameters is essential for the improvement of model performance. Generally, the trial-and-error method is widely used; however, this method is passive and limited to various and comprehensive parameter ranges. In this study, the Generalized Likelihood Uncertainty Estimation (GLUE) method was used to estimate the optimal range of three parameters (gamma, facua, and gamma2) using morphological field data collected in Maengbang beach during the four typhoons that struck from September to October 2019. The model performance and optimal range of empirical parameters were evaluated using Brier Skill Score (BSS) along with the baseline profiles, sensitivity, and likelihood density analysis of BSS in the GLUE tools. Accordingly, the optimal parameter combinations were derived when facua was less than 0.15 and simulated well the shifting shape, from crescentic sand bar to alongshore uniform sand bars in the surf zone of Maengbang beach after storm impact. However, the erosion and accretion patterns nearby in the surf zone and shoreline remain challenges in the XBeach model.

• 한국국방경영분석학회지
• /
• 제36권1호
• /
• pp.29-38
• /
• 2010

In Korea weapon system acquisition processes, it's required a cost estimation report obtained from a commercial cost model. The PRICE model is generally used as a cost estimation model in Korea. However, the model uses American historical R&D data and it's output cost component is different from our cost component of defense accounting system. Also, we found that estimating results show about 10% of difference when we comparing with actual costs in 44 finished weapon acquisition projects. There are some limitations in calibration to increase an accuracy of the PRICE model because it's difficult obtain good real input data, detailed cost and technical data in low level WBS. So, only 8% of the defense R&D projects are calibrated and validation of calibration results is more difficult. Therefore, we studied the standard calibration process and performed the calibration about the MCPLXS/E parameters of the PRICE model based on actual cost data. In order to obtain a good calculation result, we collected the actual material costs from the defense industry companies. Our results can be used for an reference in similar weapon system R&D and production cost estimation cases.

• 오토저널
• /
• 제25권4호
• /
• pp.74-82
• /
• 2003

Future emission legislation requirements especially the need for CO$_2$ reduction lead to more complex powertrain concepts with an increasing number of independent parameters to be calibrated. For gasoline engines concepts with variable valve timing, direct injection or variable charge motion are in development or already on production. Diesel engines with common rail systems offer a wide range of new injection strategies, the application of new exhaust aftertreatment systems leads to additional complexity. Furthermore a clear trend to highly sophisticated transmission concepts requires a perfect interaction of all powertrain components. While the higher complexity requires increasing test and development effort, the development duration is reduced significantly. Consequently, the potential of such systems cannot be fully utilised by traditional development and calibration approaches within the given timeframe. By introduction of intelligent methodologies f3r the calibration of modem powertrains the development becomes more efficient, faster and better in quality. However, even with standardised and automated calibration methods a differentiated brand-specific powertrain character has to be maintained comparable to a "handmade" calibration performed by highly experienced experts.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.413-416
• /
• 1998

Sensitivity and calibration considerations are most important in the design and implementation of real control systems. Ideally parameter changes due to various causes should not appreciably affect the system's performances. But all the values of physical components of the plants and controllers as well as the relevant environmental conditions change in time, thus the output performance can be deteriorated during the operating span of the system. Naturally the duty of calibration or the prevention of performance deterioration due to excessive component sensitivity should be provided to the control system. In this paper, we propose a digital controller which has the capability of calibration and gain adjustment as well as the execution of control law. Specifically the problems of gain adjustment and offset calibration in the light source and CdS sensor module for position measurement in a flexible link system are considerably resolved. The parameters of measurement module are prone to change due to environmental brightness conditions resulting in poor steady state performance of the overall control system. Thus a proper method is necessary to provide correction to the changed values of gain and offset in the position measurement module. The proposed controller, whenever necessary, measures the open-loop characteristics, andthen calculates the offset and sensor gain correction values based on the prepared standard measurements. It is applied to the control of a flexible link system with the gain and offset calibration porblems in the light sensor module for position to show the applicability.

• 환경영향평가
• /
• 제15권6호
• /
• pp.435-441
• /
• 2006

For the calibration of rainfall-runoff model, automatic calibration methods are used instead of manual calibration to obtain the reliable modeling results. When mathematical programming techniques such as linear programming and nonlinear programming are applied, there is a possibility to arrive at the local optimum. To solve this problem, genetic algorithm is introduced in this study. It is very simple and easy to understand but also applicable to any complicated mathematical problem, and it can find out the global optimum solution effectively. The objective of this study is to develope a parameter optimization program that integrate a genetic algorithm and a rainfall-runoff model. The program can calibrate the various parameters related to the runoff process automatically. As a rainfall-runoff model, SWMM is applied. The automatic calibration program developed in this study is applied to the Jangcheon watershed flowing into the Youngrang Lake that is in the eutrophic state. Runoff surveys were carried out for two storm events on the Jangcheon watershed. The peak flow and runoff volume estimated by the calibrated model with the survey data shows good agreement with the observed values.