• 제목/요약/키워드: calcium sulfate hemihydrate

검색결과 22건 처리시간 0.024초

가압반응기를 이용한 배연탈황석고로부터 α형 반수석고의 생성 (Preparation of Calcium Sulfate α-Hemihydrate from FGD Gypum in the Autoclave)

  • 박승수;김기형;안희수;박광규
    • 공업화학
    • /
    • 제17권6호
    • /
    • pp.619-624
    • /
    • 2006
  • 유연탄을 연소하는 화력발전소의 탈황설비에서 생산된 배연탈황석고를 대상으로 가압반응기를 이용하여 수열반응을 통한 알파형 반수석고의 생성과정을 살펴보았다. 실험 결과 첨가제를 사용하지 않아도 반응온도 $120{\sim}140^{\circ}C$ 범위 하에서는 용해-재석출 기구에 의하여 알파형 반수석고가 생성되었으나 아스펙트 비가 매우 높은 침상형 결정이 생성되었다. 호박산나트륨을 첨가제로 주입한 결과 결정형상은 침상형에서 각주형으로 변화되었으며 혼수 비(water/powder ratio)는 33%까지 감소하였다. 호박산나트륨의 농도는 20 mM이 적정하였으며 반응도중 성형체의 붕괴를 방지하고 성형체의 기공부피에 의한 모세관 효과를 최대화하기 위한 최적의 성형체 성형압력은 $30kgf/cm^2$이었다.

마이크로파 가열에 의한 부산석고(副産石膏)의 건조 특성 (Drying of By-product Gypsum by Microwave Heating)

  • 김형석;채영배;정수복;장영남
    • 한국광물학회지
    • /
    • 제21권2호
    • /
    • pp.193-200
    • /
    • 2008
  • 배연탈황석고 및 인산부산석고에 함유된 부착수분을 마이크로파에 의한 직접 내부 가열 방법으로 증발시켜 건조하고자 하였다. 700 W, 1,000 W, 1,700 W의 출력인 마그네트론에서 발생된 2.45 GHz의 마이크로파로 배연탈황석고와 인산부산석고를 가열한 결과, 마이크로파 출력의 세기를 700 W에서 1,700 W로 높임에 따라 부착수의 증발시간이 10분에서 3분으로 단축되었고, 이수석고는 베타형 반수석고로 변질되었다. 그러나 베타형 반수석고는 무수석고로 변질되지 않았다.

고강도 혼합분쇄 처리에 의한 인운모로부터 리튬의 수 침출 특성 (Extraction of Lithium from Lepidolite through Intensive Grinding with Calcium Sulfate Hemihydrate Followed by Water Leaching)

  • 김병진;김수윤;이재령
    • 자원리싸이클링
    • /
    • 제26권3호
    • /
    • pp.47-52
    • /
    • 2017
  • 중액선별(HMS, heavy medium separation)을 통해 회수된 인운모(lepidolite) 정광(Li: 2.3%)으로부터 리튬을 수 침출하기 위해 황산칼슘 반수화염(CSH, calcium sulfate hemihydrate, $CaSO_4{\cdot}1/2H_2O$)과 혼합분쇄하여 기계화학적 효과를 연구하였다. 인운모를 CSH와 함께 고강도 분쇄한 결과, 리튬의 침출율이 4.48%에서 93.5%로 급격히 증가하였다. 이는 고강도 혼합분쇄 과정 중 발생되는 기계화학적 효과로 인해 결정구조가 파괴되면서 인운모와 CSH의 혼합물이 새로운 화합물로 형성되어 나타난 결과로 판단된다. 결과적으로 인운모로부터 상온에서 리튬의 수 침출이 가능함을 확인하였다.

Elution profiles of metronidazole from calcium sulfate beads

  • Burasarin Ithisariyanont;Saranya Poapolathep;Amnart Poapolathep;Pareeya Udomkusonsri
    • Journal of Veterinary Science
    • /
    • 제24권6호
    • /
    • pp.74.1-74.15
    • /
    • 2023
  • Background: Antibiotic beads are used to treat local bacterial infections by delivering high drug concentrations to infected tissue. Objectives: This study examined the elution characteristics of metronidazole from metronidazole-calcium sulfate (MCa) and metronidazole-calcium-potassium sulfate (MCaK) beads over 20 days and the antibacterial efficacy of the beads after storage. Methods: The MCa and MCaK beads were prepared by mixing 250 mg of metronidazole and 10 g of calcium sulfate hemihydrate with water and a 3% potassium sulfate solution, respectively. The beads were placed in phosphate-buffered saline for the elution study. The metronidazole eluents were determined using high-performance liquid chromatography. The microstructures were examined by scanning electron microscopy (SEM), and the antimicrobial activity was evaluated by a microbioassay. Results: For the 20-day study, the total amount of metronidazole released was greater in the MCa beads than in the MCaK beads by 6.61 ± 0.48 mg (89.11% ± 3.04%) and 4.65 ± 0.36 mg (73.11% ± 4.38%), respectively. The amounts of eluted drugs from the MCa and MCaK beads were higher than the minimum inhibitory concentration at 0.5 ㎍/mL against anaerobic bacteria at both 20 days and 14 days. SEM showed that calcium crystals on the outer surface had dissolved after elution, and thinner calcium crystals were prominent in the MCaK beads. The MCa and MCaK beads exhibited antibacterial activity after setting, followed by storage at room temperature or 4℃ for 21 days. Conclusions: The MCa beads could release more drug than the MCaK beads, but all eluted metronidazole amounts were effective in controlling bacterial infections. Both metronidazole beads could be stored at ambient temperature or in a refrigerator.

알파형 반수석고 기반 결합재의 pH 및 강도발현 평가 (Evaluation of pH and Compressive Strength Development of Alpha-Calcium Sulfate Hemihydrate-based Binder)

  • 이경호;양근혁
    • 한국건축시공학회지
    • /
    • 제16권1호
    • /
    • pp.59-65
    • /
    • 2016
  • 이 연구에서는 중성(pH 6~7) 수준의 식생용 콘크리트 결합재를 개발하기 위해 알파형 반수석고 기반의 결합재들의 pH 값과 압축강도 발현을 평가하였다. 식생용 콘크리트를 위한 결합재의 경제성 및 강도발현을 고려하여, 알파형 반수석고는 GGBS, FA 및 보통포틀랜드 시멘트를 사용하여 25% 및 50% 치환하였다. 알파형 반수석고를 100% 사용한 모르타르의 압축강도는 시멘트 100% 모르타르에 비해 약 57% 수준으로 있었다. GGBS 및 FA 치환율 증가와 함께 알파형 반수석고 기반 결합재의 압축강도는 감소하였지만 pH 값은 재령에 관계없이 6.5~7.5 수준으로 일정하게 있었다. GGBS 및 FA가 치환된 알파형 반수석고 결합재의 주요 수화생성물은 석고($CaSO_4$)이었으며, 수산화칼슘 [$Ca(OH)_2$]은 나타나지 않았다. 반면 시멘트가 치환된 알파형 반수석고의 pH 값은 $Ca(OH)_2$의 생성으로 인해 약 11.5 이상이었는데, 생성된 $Ca(OH)_2$ 양은 단위 시멘트 양의 약 10% 수준이었다.

백서 치조골 천공결손부에서의 합성골 이식재의 재생효과 (Regenerative Effects of Alloplastic Grafts in Rat Periodontal Fenestration Defects)

  • 강윤경;박준봉;권영혁;허익
    • Journal of Periodontal and Implant Science
    • /
    • 제31권2호
    • /
    • pp.317-332
    • /
    • 2001
  • The purpose of this study was to investigate effects of the natural coral(NC) and the hydroxyapatite/calcium sulfate hemihydrate(HA/CS) on an early stages of wound healing in the rat periodontal fenestration defects. In this experiment, twelve male rats(Mean : 520g in BW) aged 8 to 9 months were used. Experimental periodontal fenestration defects were surgically created with tapered fissure bur at the buccal surface of the left mandibular 1st, 2nd molars. The buccal aspects of molar roots were carefully denuded of their periodontal ligament through a bony window created in the left mandibles of rats under general anesthesia. Each experimental periodontal fenestration defect was grafted with natural coral and HA/CS, randomly. An area without bone graft was assigned for negative control group. At 10,35 days, rats were serially sacrificed via intracardiac perfusion with 2.5% glutaraldehyde and specimens were processed with Hematoxylin-Eosin stain for light microscopic evaluation. The results of this study were as follows : 1. The defect areas were filled with dense connective tissues at 10 days in control group. But in the test(NC, HA/CS)groups, the connective tissues around graft materials were formed more loosely and the response of inflammation by graft materials itself was not found. 2. The defect areas were filled with new osteoid tissues and new cementum was not formed on the cut root surface at 35 days in the control group. 3. New osteoid tissue formation was more prominent at 35 days in control than test groups. 4. The NC and HA/CS particles were encapsulated by loose connective tissues at 10 days and by dense connective tissues at 35 days, respectively. 5. In the test groups, resorption of graft particles was not found through the experimental time. From the above results, natural coral and hydroxyapatite/calcium sulfate hemihydrate may be biocompatible and osteoconductive and have a weak adverse reaction to the periodontal tissues.

  • PDF

상압수용액중에서 인산석고로부터 $\alpha$형 반수석고의 생성에 미치는 염류의 영향 (Effect of Salt on the Formation of $\alpha$-Calcium Sulfate Hemihydrate from by-Product Gypsum of Phosphoric Acid Process in Aqueous Salt Solution at Atmospheric Pressure)

  • 이구종;최상흘
    • 한국세라믹학회지
    • /
    • 제25권1호
    • /
    • pp.66-72
    • /
    • 1988
  • The effect of salts on the formation of ${\alpha}$-hemihydrated gypsum at boiling temperature under atmospheric pressure was studied by the solubility measurement method, and the formation of ${\alpha}$-hemihydrated gypsum from by-product gypsum of phosphoric acid process in the salts solution were investigated. The order of catalytic effect of salt on the formation of ${\alpha}$-hemihydrated gypsum are as follows: NH4Cl>NaCl>NaNO3. In the salts solution of sodium nitrate, sodium chloride, and ammonium chloride, prismatic ${\alpha}$-hemihydrated gypsum was obtained and the crystal form was converted to needle form in complex solution with sulfuric acid. The P2O5 content in gypsum was largely decreased in this atmosphoric solution process.

  • PDF

인공어초 3D 프린터 출력을 위한 저알칼리 모르타르의 강도와 내구성능 (Strength and Durability Characteristics of Low-alkali Mortar for Artificial Reefs Produced by 3D Printers)

  • 이병재;김봉균;김윤용
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제26권1호
    • /
    • pp.67-72
    • /
    • 2022
  • 콘크리트는 강알칼리성으로 인해 철근의 부식을 방지하는 장점이 있으나, 해중에 침지되면 해수의 평균 pH 8~9 보다 높은 pH 12~13의 강알칼리 성분을 용출하여 주변의 미생물 및 해양생물의 생태환경 및 성장에 악영향을 미치게 된다. 따라서 본 연구에서는 3D 프린터로 제작되는 인공어초용 저알칼리 모르타르 배합을 도출하기 위하여 저알칼리 모르타르의 역학적 특성 및 내구성능을 평가하였다. 강도 특성 평가결과 결합재로 실리카퓸, 플라이애시, 알파형반수석고 모두 혼입한 α-35배합에서 Plain 을 제외하고 가장 우수한 특성을 나타내었으며, 인공어초 품질기준인 27MPa를 확보할 수 있는 것으로 나타났다. pH는 알파형반수석고 혼입시 수산화칼슘 생성 억제와 황산칼슘 생성으로 인해 pH저감 효과가 우수한 것으로 나타났다. 염소이온침투저항성 실험결과, 실리카퓸 및 플라이애시 혼입시 일부 내염성이 개선되었으며, 알파형반수석고 와 혼합사용한 α-35 배합에서 3844C의 가장 우수한 염소이온침투저항성을 확인하였다. 길이변화율 측정결과, 알파형반수석고 35%대체시 OPC배합조건보다 33.5% 개선된 수축저항성을 나타내었다.

인산부생석고(燐酸副生石膏)로부터 결정질(結晶質) 이수석고(二水石膏)의 제조(製造) (Synthesis of Crystalline Calcium Sulfate Dihydrate from Phosphogypsum)

  • 박운경;송영준;이중미;이계성;김윤채;신강호;윤시내;박찬훈
    • 자원리싸이클링
    • /
    • 제15권3호
    • /
    • pp.20-29
    • /
    • 2006
  • 본 연구는 인산부생석고를 결정성장시켜 고순도의 결정질 이수석고를 제조하여 다용도의 석고를 얻고자 하였다. $99^{\circ}C$의 수중에서 약 2시간 동안에 이수석고는 $\alpha$형의 반수석고로 탈수가 완료되었다. 수중탈수된 반수석고를 매정제 $Na_2SO_4$를 10wt%, 슬러리 농도는 20%, pH가 $5{\sim}6$, 결정성장온도 $65^{\circ}C$의 조건에서 4시간 동안 결정성장 시키면 장경이 $200{\mu}m$정도인 결정을 얻을 수 있었다. 결정성장이 끝난 슬러리를 325#로 습식사분하여 사상산물로 고순도 결정성장 석고를 얻었으며, 이 때 석고의 회수율은 약 93.9%, 순도는 99% 정도 였다.