• Journal of Information Display
• /
• v.10 no.1
• /
• pp.37-44
• /
• 2009

AiPi technology incorporates an embedded clock and control scheme with a point-to-point bus topology, thereby having the smallest possible number of interface lines between a timing controller and column drivers. A point-to-point architecture boosts the data rate and reduces the number of interface lines, because impedance matching can be easily achieved. An embedded clock and control scheme is implemented by means of multi-level signalling, which results in a simple clock/data recovery circuitry. A 46" AiPi-based 10-bit FHD prototype requires only 20 interface lines, compared to 38 lines for mini-LVDS. The measured maximum data rate per data pair is more than 800 Mbps.

• Proceedings of the KIPE Conference
• /
• 2002.11a
• /
• pp.213-217
• /
• 2002

Power devices for high power drivers that need high switching speed (IGCT, HVIGBT) have been continuously developed. However, serial and parallel connections using several much cheaper, lower power capacity of devices than an expensive high power device are very useful methods in the aspect of cost down and high power application. Even the current and voltage unbalance problem is occurred at each devices. This unbalance characteristics are mainly caused by the differences of physical characteristics of each devices and the line inductance (stray inductance) of bus bars that consist of current path. This paper deals simulation analysis of serial connection of IGCTs and parallel connection of IGCTs using physical model of devices. And also, introduces the method to reduce the voltage and current unbalance problem.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.2
• /
• pp.369-377
• /
• 2017

The city of Busan implemented the 'Bus Quasi-Public Operating System' as a part of the Public Transit Activation Policy. Although the reorganization of routes and fares had temporarily increased the number of passengers, it is facing a downtrend currently. This implies the limited capability of increasing the use of the city buses only by adjusting the systematic components of the system. Thus, the research aims to analyse the effect of improving the 'kindness service' as an alternative way to vitalize the use of city buses. The analysis uses the survey encompassing sixteen 'kindness service' factors that was collected from the passengers and the drivers of the city buses in Busan, and some of the notable findings are followed. According to the analysis of determining the level of importance on the 'kindness service' factors, four major categories were derived; a category to maintain/reinforce the kindness service, a category to make incremental improvement, a category to encourage improvement, and a category to make focusing improvement. Using the categories, the study then performed the cluster analysis on 33 city bus companies in Busan to determine the differences between the companies. Consequently, the companies were grouped into four; two groups (14 companies) showing more importance on the kindness service while the other two groups (19 companies) showing less. In addition, multivariate an analysis of variance (MANOVA) identified the significant differences of the four categories among the groups of companies, and the findings were taken into consideration on further improvement plans of kindness service in the city buses of Busan.

• Journal of environmental and Sanitary engineering
• /
• v.21 no.1 s.59
• /
• pp.12-20
• /
• 2006

This paper was conducted concerning the degree of indoor air quality in public transport vehicles such as taxicabs, buses and subway trains, as sampled through the active participation of drivers and passengers in Seoul between 13th August 2005 and 2nd November 2005. The results were summarized as follows: 1. Among the measured substances especially respirable particulate matters ($PM_{10}$), total bacteria counts (TBC) and carbon dioxide ($CO_2$) exceeded the standard level of $150{\mu}g/m^3,\;800CFU/m^3$ and 1000ppm. 2. The concentration of carbon dioxide ($CO_2$) in taxi recorded 2491ppm, which is more than the standard amount of 1000ppm. This level was comparatively higher than all other public transportation methods. Total bacteria counts (TBC) in bus and subway recorded $1082CFU/m^3\;and\;1856CFU/m^3$, respectively. 3. The drivers who regularly work long hours showed the higher concern about contamination of the air inside the public transport vehicles and they considered it to be worse than the air outside. In contrast, the general public showed less concern about the air quality inside the public transport vehicles. However, they too acknowledged that the quality of the air inside the public transport vehicles was poor. In regards to the degree of indoor air quality in the public transport vehicles, a counterplan must be implemented urgently to effectively combat the excessive levels of $PM_{10}$, microorganism and $CO_2$. We need to gather more conclusive evidence pertaining to other possible contaminants and influencing factors.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.2D
• /
• pp.191-203
• /
• 2008

According to a characteristic analysis of traffic accidents of industrial vehicles (RTSA 2007), the occurrence rate and lethality per 10,000 vehicles is 6.7 times higher and 5.3 times higher than that of non-industrial vehicles respectively. For the recent 10 years, in contrast to the 1.5% decrease of the annual rate of entire traffic accidents, the accident rate of industrial vehicles have been increasing 2.0% on the annual average. For the recent 10 years, the accidents of a freight truck and bus have been steadily falling off. But, in the case of a taxi, it has constantly been rising 5.6%. In these situations, the countermeasures to decrease the accident rate are suggested by grasping the inclination of taxi drivers through Q analysis which is character and psychology analysis method.

• Journal of the Microelectronics and Packaging Society
• /
• v.17 no.4
• /
• pp.73-76
• /
• 2010

A two-facet approach was used to investigate the parametric performance of functional high-speed DDR3 (Double Data Rate) DRAM (Dynamic Random Access Memory) die placed in different types of BGA (Ball Grid Array) packages: wire-bonded BGA (FBGA, Fine Ball Grid Array), flip-chip (FCBGA) and lead-bonded $microBGA^{(R)}$. In the first section, packaged live DDR3 die were tested using automatic test equipment using high-resolution shmoo plots. It was found that the best timing and voltage margin was obtained using the lead-bonded microBGA, followed by the wire-bonded FBGA with the FCBGA exhibiting the worst performance of the three types tested. In particular the flip-chip packaged devices exhibited reduced operating voltage margin. In the second part of this work a test system was designed and constructed to mimic the electrical environment of the data bus in a PC's CPU-Memory subsystem that used a single DIMM (Dual In Line Memory Module) socket in point-to-point and point-to-two-point configurations. The emulation system was used to examine signal integrity for system-level operation at speeds in excess of 6 Gb/pin/sec in order to assess the frequency extensibility of the signal-carrying path of the microBGA considered for future high-speed DRAM packaging. The analyzed signal path was driven from either end of the data bus by a GaAs laser driver capable of operation beyond 10 GHz. Eye diagrams were measured using a high speed sampling oscilloscope with a pulse generator providing a pseudo-random bit sequence stimulus for the laser drivers. The memory controller was emulated using a circuit implemented on a BGA interposer employing the laser driver while the active DRAM was modeled using the same type of laser driver mounted to the DIMM module. A custom silicon loading die was designed and fabricated and placed into the microBGA packages that were attached to an instrumented DIMM module. It was found that 6.6 Gb/sec/pin operation appears feasible in both point to point and point to two point configurations when the input capacitance is limited to 2pF.

• Journal of Korean Society of Transportation
• /
• v.28 no.4
• /
• pp.157-166
• /
• 2010

The aim of this paper was to estimate efficiency using a directional distance function to compare performances of bus agencies to determine if they have made efforts to operate efficiently and reduce emissions and accidents since public transportation reforms 2004. Drivers, mechanics, staff, buses, and fuel were used as input data and vehicle-kilometers (a desirable output), accident costs, and emission costs (undesirable outputs) as output data during June 2005. As a result, the efficiency with undesirable outputs was lower than the efficiency without undesirable outputs. However, the number of efficient agencies was more in case of the consideration of undesirable outputs. The reason is that the number of agencies whose possibility to reduce undesirable outputs are less than the possibility to reduce inputs was increasing, while the efficiency deviation among agencies was larger in case of the consideration of undesirable outputs. Meanwhile, the increase of CNG buses and operating speed and the improvement of mechanical efficiency had positive influence on the efficiency.

• Journal of the Institute of Convergence Signal Processing
• /
• v.5 no.1
• /
• pp.40-45
• /
• 2004

This paper presents the parallel distributed control scheme for shaping of the bent glass. The designed system consists of a PC, a main controller and 11 servo-controllers, the precision motion controllers. Each elements are connected by using RS-232C and 8-bit data bus. In order to guarantee the stability and the control performance, we use a precision PID motion controller and a H-bridge on the servo-drivers. PC calculates position values of 11 DC motors by using the pre-determined curvature value and offers the user interface environment operator. The main controller provides the control instructions and parameter values to 11 servo-controllers by chip enable signal, simultaneously. Using the received commands and parameter values, the servo-controllers control the positions of the DC motors based on PID control scheme.

• Journal of Korean Institute of Industrial Engineers
• /
• v.41 no.5
• /
• pp.499-510
• /
• 2015

The purpose of this research is to identify new service opportunities for enhancing driving safety of intra-city buses based on driving behavior analysis. Service opportunity identification involves finding target customers of service (to whom), motivations for service (why), service contents (what), and service delivery process (when, where). This paper presents an analysis of driving behaviors using the operational data of intra-city buses in conjunction with traffic accident data and drivers' driving history data. This paper also presents four identified service opportunities based on the data analysis results. This research would contribute to enhancing driving safety of intra-city buses in Korea and serve as a basis for developing new services for driving safety enhancement.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.4
• /
• pp.723-728
• /
• 2022

This study is a method for evaluating and quantifying driver's dangerous driving behavior. The quantification method calculates various driving information in real time after starting the vehicle operation such as the time that the vehicle has been continuously driven without a break, overspeed, rapid acceleration, and overspeed driving time. These quantified risk of driving behavior values can be individually provided as a safe driving index, or can be used to objectify the evaluation of a group of drivers on roads, or vehicle groups such as cargo/bus/passenger vehicles.