• Journal of Astronomy and Space Sciences
• /
• 제34권4호
• /
• pp.281-288
• /
• 2017

The first Korea lunar orbiter, Korea Pathfinder Lunar Orbiter (KPLO), has been in development since 2016. After launch, the KPLO will execute several maneuvers to enter into the lunar mission orbit, and will then perform lunar science missions for one year. Among these maneuvers, the lunar orbit insertion (LOI) is the most critical maneuver because the KPLO will experience an extreme velocity change in the presence of the Moon's gravitational pull. However, the lunar orbiter may have a delayed LOI burn during operation due to hardware limitations and telemetry delays. This delayed burn could occur in different captured lunar orbits; in the worst case, the KPLO could fly away from the Moon. Therefore, in this study, the burn delay for the first LOI maneuver is analyzed to successfully enter the desired lunar orbit. Numerical simulations are performed to evaluate the difference between the desired and delayed lunar orbits due to a burn delay in the LOI maneuver. Based on this analysis, critical factors in the LOI maneuver, the periselene altitude and orbit period, are significantly changed and an additional delta-V in the second LOI maneuver is required as the delay burn interval increases to 10 min from the planned maneuver epoch.

• 대한통합의학회지
• /
• 제10권4호
• /
• pp.11-21
• /
• 2022

Purpose : The purpose of this study is to identify the degree of occupational therapist's professional ethics and to examine the correlation between professional ethics, job stress, and burnout. It also investigates the effects of the occupational therapist's professional ethics on job stress, and burn out, so that we can find a way to reduce them in occupational therapists. Methods : We conducted surveys from June 1 to July 5, 2022. The general characteristics were examined using a frequency analysis. Professional ethics, job stress, and burn out were examined using descriptive statistics. The correlation among them was analyzed with the Pearson correlation coefficient. To find out what factors affect job stress and burn out, we also conducted a multiple regression analysis. Results : First, professional ethics was averaged at 3.57±.34. Second, a significant negative correlation in professional ethics was found between job stress and burn out (p<.01). As a result of the correlation between occupational ethics sub-factors and job stress and burnout, factors excluding nonleisure and self-reliance showed a statistically significant correlation (p<.01, p<.05). Third, professional ethics sub-factor was affected job stress and burn out (p<.01, p<.05). The sub-factors affecting job stress were hard work (𝛽=.-461, p<.01), delay of gratification (𝛽=.-267, p<.01), and relation with coworker (𝛽=.-245, p<.01) and morality (𝛽=.-165, p<.05); and those influencing burnout were delay of gratification (𝛽=-.240, p<.01), relation with coworker (𝛽=-.223, p<.01), centrality of work (𝛽=-.189, p<.01) and hard work (𝛽=-.184, p<.05). Conclusion : The results of this study confirmed the importance of professional ethics affecting job stress and burn out. Through follow-up research, it will be necessary to develop and apply programs to improve professional ethic of occupational therapists in the future.

• 화약ㆍ발파
• /
• 제31권1호
• /
• pp.76-86
• /
• 2013

전자뇌관을 사용하여 근접 보안물건에 대한 터널발파 진동제어를 위해서는 근거리 발파진동 특성에 대한 이해가 필요하다. 본 논문에서는 터널발파 진동의 결정에 있어서, 심발부와 확대부의 영향을 분석하였다. 분석을 위한 계측자료는 "원주~강릉 복선전철 제${\bigcirc}{\bigcirc}$공구 노반건설공사" ${\bigcirc}{\bigcirc}{\bigcirc}$ 터널 현장의 기존 도로 하부통과 구간에서 획득하였다. 이에, 0.01%의 높은 시차 정밀도를 가진 터널용 전자발파시스템을 활용하여, 최대 지발당 장약량을 정밀하게 유지함으로써 뇌관 오차에 의한 진동 증폭현상을 제거하고, 진동제어에 유리한 심빼기 발파방법으로 번 컷(Burn-Cut)을 채택하였다. 그 결과, 심발부의 진동수준이 가장 높다는 일반적인 발파 상식과 달리 확대부의 진동수준이 상대적으로 더욱 높은 것으로 나타났다. 결과적으로, 근접 거리의 터널 발파진동은 전자뇌관을 심발부에 적용함으로서 저감시킬 수 있으며, 전체 영역에 전자뇌관을 사용할 경우 더욱 효과적으로 발파진동을 감소시킬 수 있을 것으로 판단된다.

• 전자공학회논문지B
• /
• 제31B권9호
• /
• pp.1-9
• /
• 1994

This paper analyzes the faults and their mechanism of CMOS ICs using IDDQ testing technique and evalutes the reliability of the chips that fail this test. It is implemented by the three testing phases, initial test, burn-in and life test. Each testing phase includes the parametric test, functional test, IDDQ test and propagation delay test. It is shown that the short faults such as gate-oxide short, bridging can be only detected by IDDQ testing technique and the number of test patterns for this test technique is very few. After first burn-in, the IDDQ of some test chips is decreased, which is increased in conventional studies and in subsequent burn-in, the IDDQ of all test chips is stabilized. It is verified that the resistive short faults exist in the test chips and it is deteriorated with time and causes the logic fault. Also, the new testing technique which can easily detect the rsistive short fault is proposed.

• 한국자동차공학회논문집
• /
• 제12권2호
• /
• pp.45-53
• /
• 2004

An experimental study was carried out to obtain the fundamental data about the effects of radicals induced injection on premixture combustion. A constant volume combustor divided to the sub-chamber and the main chamber was used. The volume of the sub-chamber is set up to occupy less than 1.5％ of that of whole combustion chamber. Radial twelve narrow passage holes are arranged between the main chamber and the sub-chamber. The products including radicals generated by spark ignition in the sub-chamber will derive the simultaneous multi-point ignition in the main chamber. While the equivalence ratio of pre-mixture in the main chamber and the sub-chamber is uniform. We have examined the effects of the sub-chamber volume, the diameter of passage hole, and the equivalence ratio on the combustion characteristics by means of burning pressure measurement and flame visualization. In the case of radical ignition method(RI), the overall turning time including the ignition delay became very short and the maximum burning pressure was slightly increased in comparison with those of the conventional spark ignition method(SI), that is, single chamber combustion without the sub-chamber. The combustible lean limit by RI method is extended to more ER=0.25 than that by SI method. Therefore the decrease of every emission including NOx and the improvement of fuel consumption is anticipated due to lean burn.

• 화약ㆍ발파
• /
• 제13권4호
• /
• pp.5-27
• /
• 1995

본 논문은 '95년 10월 27일 경주 Kolon Hotel에서 제25차 한일 기술사 공동 Symposium에서 발표된 내용이다.

• 한국추진공학회지
• /
• 제24권2호
• /
• pp.14-27
• /
• 2020

본 연구는 점화제와 지연제에 대한 시차 주사 열량 측정법을 통하여 반응 속도식 및 발열량을 추출하여 노화에 따른 반응 특성을 분석하기 위한 정밀 수치계산을 수행하였다. 연소 실험을 수행하여 수분이 관여된 노화에서 점화제와 지연제에서 명확한 연소 중단을 확인하였다. 이 결과를 수치계산과 비교하여 노화가 점화제와 지연제 전반에 성능 감소 및 오작동 요인으로 작용됨을 확인하였다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제23권4호
• /
• pp.44-48
• /
• 2021

In order to obtain ultra-high resolution MRI images, research and development of 11 T or higher superconducting magnets have been actively conducted in the world, recently. The high-temperature superconductor (HTS), first discovered in 1986, was very limited in industrial application until mid-2010, despite its high critical current characteristics in the high magnetic field compared to the low-temperature superconductor. This is because HTS magnets were unable to operate stably due to the thermal damage when a quench occurred. With the introduction of no-insulation (NI) HTS magnet winding technology that does not burn electrically, it could be expected that the HTS magnets are dramatically reduced in weight, volume, and cost. In this paper, a 6 T-class NI HTS magnet for basic characteristic analysis was designed, and a distributed equivalent circuit model of the NI coils was configured to analyze the charging current characteristics caused by excitation current, and the charge delay phenomenon and loss were predicted through the development of a simulation model. Additionally, the critical current of the NI HTS magnets was estimated, considering the magnetic field, its angle and temperature with a given current. The loss due to charging delay characteristics was analyzed and the result was shown. It is meaningful to obtain detailed operation technology to secure a stable operation protocol for a 6T NI HTS magnet which is actually manufactured.

• 기술사
• /
• 제15권2호
• /
• pp.3-15
• /
• 1982

The study on prevention measures for vibration and excavation of tunnel for the #3, #4, Seoul Subway. In the Seoul subway tunnel blasting, the drilling pattern and prevention method to seismic vibration are as follows as well as for adaptions of NATM, the supportings of roof and wall holes are arranged with control blasting. 1. The blasting is executed basically using the low velocity explosive such as slurry, Nitrate ammonium explosive, and F-I and F-II explosive for control blasting substituting of existing dynamite. 2. The cut holes are arranged with burn cut pattern and also must be arranged with M/S electrical delay caps substituting of ordinary do]ay caps. 3. Jack leg drills are used in Five Job sites and a jumbo drill in one job site. 4. In performance of safety work and in maintenance of building safety. The drilling length for blasting will not exceed 1.20 meter for round so that the vibration value shall carry below 0.3cm/sec. The harmonizing of better powder, better drilling machine and better technique is only the way of improving tunnelling efficiency and less vibration will help the dereasing of accidence.

• 한국분무공학회지
• /
• 제23권2호
• /
• pp.96-101
• /
• 2018

The purpose of this study is to investigate the effect of water injection on combustion characteristics of gasoline direct injection (GDI) engine with turbo-charger under low-load operating condition. The test engine used in this study has four-cylinder and 10.2 of compression ratio. In order to study the effect of water injection ratio on combustion characteristics, the water was injected into the intake port from 10% to 50%, based on fuel injection quantity. From the experiment, it revealed that the water injection induced the improvement of fuel economy because of the advance of spark-timing by the reduction of in-cylinder temperature. In addition, the water injection caused the prolong of extension of the ignition delay and slight increase of burn duration.