• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2006년도 춘계학술논문 발표대회 제6권1호
• /
• pp.39-42
• /
• 2006

Recently, more highly effective construction materials are needed for the reasonable and economical structure system is required as the construction structures become more multi storied, large-sized and diversified. That is to say, the highly qualified concrete, the molt universal construction material is positively promoted as a part of plan to establish the effective space according to the dead load of structures and diminish of segment profile and to build up the economic structures. In particular, it is tendency of that the study for high strength concrete increases and construction example of reinforced concrete (RC) using the high strength concrete partially increases. However, the high strength concrete has the problems such high brittleness and low ductility. Specially, for the high strength concrete, it has different strength from normal concrete as the internal temperature goes up steadily due to high heat of hydration by the quantities of highly level of cement, so the concrete which is mixed with various scible materials is used. This study conducted a basic experiment to conclude an adequate selection of materials and to calculate an optimal mixing proportion of those materials to produce High-strength concrete. And also we conducted an experiment to find out basic properties of this concrete such as slump-flow, strength.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.213-214
• /
• 2023

Positioning information of workers is important for safety management at construction sites. Among the various indoor positioning technologies, geomagnetic fields-based technology is more economical and has less error than other technologies. However, there is a problem that the installation and dismantling of materials such as formwork at construction sites can cause degradation in positioning performance. Therefore, in this study, the distortion of the geomagnetic field near euro-form was quantitatively measured and the application method of geomagnetic field-based indoor positioning technology on formwork stage was presented. The results showed that the distortion occurred within 10cm of the wall and column form, but positioning accuracy could be affected up to 60cm from the form due to the characteristic of geomagnetic field-collecting technology. Therefore, applying this technology to the formwork stage requires complementary measures, such as using other positioning techniques up to 60 cm near the formwork, or excluding distorted area when positioning. It is expected that this study can contribute to the efficient safety management of workers by suggesting ways to prevent an increase in positioning error when applying geomagnetic field sequence-based indoor positioning technology during the formwork stage.

• 농촌계획
• /
• 제19권1호
• /
• pp.189-207
• /
• 2013

This study aimed to draw the plan elements and characteristics that should be considered in case when developing guidelines to build up roads in rural villages. Drawing the construction elements necessary for building up roads through the advanced researches, the survey was conducted for relevant experts in order to evaluate the importance of each plan element of route plan, design & construction and operation & management. The result determined total 105 contents that should be considered in case when building up roads in rural villages. The study on building up roads in rural villages as a strategy to vitalize rural areas means universal roads that connect each village with rural amenities in various values like walking tour road, visit roads and observation roads. It is considered that the development of guidelines for building up roads in rural villages could be used as a basic data to build up roads where nature, culture and history of rural areas can be effectively experienced and enjoyed.

• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.1491-1496
• /
• 2009

Because of the development of advanced construction technology, the inner environments of building become more and more complicated, which may result in many problems. The administer may forget where they put up the certain picture, and search for it all over the building, or they underestimate the number of the visitors, and find the situation is out of control, while the pedestrian may get lost, and after making their efforts, they found they turned back to the origin point again. So it is very necessary to establish an indoor spatial database. On one hand, it is able to assist administrator to manage the property and human flow inside the building, on the other hand it could help the pedestrian find the way easily especially when they are not familiar with the building or there is an emergency. This paper focused on how to create the indoor spatial database including both static database and moving objects database. The static database is built on the basis of 3D building models, and the moving objects database gets information from many kinds of cameras and sensors installed in the building. And at the same time the paper discussed the practical use of indoor spatial database mainly in three aspects including consistency management, building restructure, and pedestrian navigation.

• 건축역사연구
• /
• 제16권3호
• /
• pp.57-74
• /
• 2007

Jeoksimto which was build up as the reinforcement establishment made with the soil under the cornerstone in the site of tile-capped building is the representative construction technique which become popular in the Sabi capital era after the Wungjin capital era. Especially from the fact that no site of tile-capped building with this Jeoksimto has been found in the Silla area, we can see the originality Baekje technique. We can analogize the specialization of Josagong (造寺工) (craftsman building the temple) and the diversity of technique, on the basis of the technique raising the ground level which is different with the middle gate site of Neung-sa and the Hall enshrining Buddha site in Buyeo. Moreover, we can have the confidence the dispatch of craftsman and the transmission of building technique from the Buyeo area to the Iksan area through the fact that the construction techniques of Jeoksimto in both area are almost the same. However the concerns in the construction archaeology are necessary because almost no study for Jeoksimto has been conducted and the term of Jeoksimto also is unfamiliar even if excavation of Baekje Jeoksimto in the several remains.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.405-410
• /
• 2009

This paper presents a case study that achieved both of serviceability and safety of the building through soil reinforcement and restoration around foundations subjected to serious differential settlement using D-ROG method. The building which has one basement floor and three ground floors is founded on soft ground and differential settlement occurred to the maximum extent of 678mm. The foundation type of the building is a independent mat foundation. Soil profiles consist of landfill layer, alluvial layer, weathered rock, and soft rock. The bearing layer consisting of gravel and weathered rock is located 16.0~17.0m below the bottom of the building. As a result of soil reinforcement and restoration, the recovery ratio of more than 90% can be attained with the maximum set-up of 657mm.

• 한국건축시공학회지
• /
• 제10권6호
• /
• pp.137-143
• /
• 2010

사용되는 새로운 원가 관리 방안으로 시장 상황에 따라 제품의 가격을 고정하고, 고정된 제품가격에서 기업의 이익과 비용을 차감함으로써 산출하는 시장 지향적 원가산출 방법이다. 본 논문은 프로젝트 개발에서부터 원가 관리의 개념을 도입하는 Target Costing의 개념을 고찰함을 목적으로 한다. "낭비의 최소화, 가치의 최대화"는 프로젝트의 기획 단계에서 건물의 적정 설계 가이드라인을 설정함으로써 얻을 수 있다. 이러한 효과적 예산 관리 방법은 한국의 호화청사 건설 문제를 타개 방안이 될 수 있을 것이다.

• 대한건축학회논문집:구조계
• /
• 제35권7호
• /
• pp.187-195
• /
• 2019

In December 2015, The Paris Agreement was adopted to undertake ambitious efforts to combat climate change. Korean government announced its goal of reducing the country's greenhouse gas emissions by up to 37% below business as usual projections by 2030 in 2015. The purpose of this study was to set up the calculation methodology of GHG emission($CO_{2e}$) in building sector and to estimate the annual GHG emission in building sector based on national energy consumption statistic. The GHG emission from buildings is about 135.8 million ton $CO_{2e}$ as of 2015, taking up about 19.6% of Korea's entire emission and is about 144.7 million ton $CO_{2e}$ in 2017. The GHG emission of building sector is increasing at annual rate of 2.0% from 2001 to 2017. The GHG emission from electricity consumption in buildings is 91.8 million ton $CO_{2e}$ in 2017, is the highest $CO_2$ emission by energy source. The results show that the intensity of GHG emission of residential building sector is $40.6kg-CO_{2e}/m^2{\cdot}yr$ and that of commercial building sector is $68.4kg-CO_{2e}/m^2{\cdot}yr$.

• 한국건설관리학회논문집
• /
• 제25권3호
• /
• pp.37-46
• /
• 2024

최근 스마트 건설기술 중 현상에 대한 정확하고 빠른 정보수집이 가능한 3D 레이저 스캐닝 기술이 주목받고 있다. 3D 레이저 스캐닝 기술은 건설현장에서 현실과 가장 유사한 정보를 획득할 수 있다. 본 연구에서는 3D 레이저 스캐닝 기술을 활용하여 수집할 수 있는 포인트 클라우드 데이터를 건설현장 진도측정에 적용 가능성에 대하여 새로운 부재 식별방법을 실제 건물에 적용하여 제시하고자 한다. 연구 수행을 위해 BIM으로부터 부재 식별을 위한 위치 정보를 수집, 수집된 위치 정보의 인식 여유 범위를 설정하여 포인트 클라우드 데이터로부터 건물을 구성하고 있는 부재 식별을 진행하였다. 연구결과 포인트 클라우드 데이터로부터 건물을 구성하고 있는 기둥, 보, 벽 그리고 슬라브를 식별할 수 있음을 확인하였다. 식별결과는 실제 건물에 시공이 완료된 부재를 모두 확인할 수 있었으며, 이를 프로젝트 BOQ의 부재별 단가와 연동하여 기성 산출에 활용할 수 있다. 또한, 연구를 통해 획득한 포인트 클라우드 데이터는 건설현장의 품질관리 모니터링 및 건물의 유지관리를 위한 정확한 자료로써 활용될 수 있다. 연구결과는 추후 프로젝트 활용을 위해 사용되는 건설 정보의 적시성 및 정확성 향상에 기여할 수 있을 것으로 사료된다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 춘계 학술논문 발표대회
• /
• pp.24-25
• /
• 2014

Up to now, most the fenestration industry is consisted of glazing and window frame in Korea. According to the Fenestration Energy Consumption Efficiency Rating System and Energy Saving Design Standards of Buildings, u-value of fenestration is defined as the value of calculation with glazing and frame. For this reason, when applying for a building permit, in most cases, the official approval test report of the set of windows and doors is used. Nevertheless, in windows construction progresses, most construction manager take delivery of the glazing and frame separately. For those reason, windows and doors are constructed regardless of the report of the Fenestration Energy Consumption Efficiency Rating System in most construction fields. From now on, the research of the connection method between reality of policy and reality of construction fields should be carried out.