• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.366-367
• /
• 2006

In general, HF chemistry lifts off the particles during scrubbing after polishing and effectively removes particles. It is sometimes impossible to apply HF chemistry on W plug due to the degradation of electrical characteristics of a device. In this paper, a post W CMP cleaning process is proposed to remove residue particles without applying HF chemistry. After W CMP, recessed plugs are created, therefore they easily trap slurry particles during CMP process. These particles in recessed plug are not easy to remove by brush scrubbing when $NH_4OH$ chemistry is used for the cleaning because the brush surface can not reach the recessed area of plugs. Buffing with oxide slurry was followed by W CMP due to its high selectivity to W. The buffing polishes only oxide slightly which creates higher plug profiles than surrounding oxide. Higher profiles make the brush contact much more effectively and result in a similar particle removal efficiency even in $NH_4OH$ cleaning to that in HF brush scrubbing.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.04a
• /
• pp.197-202
• /
• 2004

As a part of environmental pollution prevention and resources recycling, the regeneration of waste tire has been largely contributed to national industry. But, the worker has been evaded this regeneration process by reason of the best mischievous process condition among 3D industries. So, the first, the process condition of regenerating waste tire was analyzed. The second, the equipment or system was developed for the improvement of working strength and environment. The last, researchers intend to solve these problems

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.10a
• /
• pp.175-180
• /
• 2004

As a part of environmental pollution prevention and resources recycling, the regeneration of waste tire has been largely contributed to national industry. But, the worker has been evaded this regeneration process by reason of the best mischievous process condition among 3D industries. So, the first, the process condition of regenerating waste tire was analyzed. The second, the equipment or system was developed for the improvement of working strength and environment. The last, researchers intend to solve these problems

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.227-228
• /
• 2013

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.1622-1625
• /
• 2002

This paper studies the bifurcation of combinatorial oscillations in coupled Duffing’s circuits when symmetry is broken. The system consists of two periodic farced circuits coupled by a linear resistor, These two periodic external forces are sinusoidal voltage sources with various phase-shift. We investigate the relation between phase-shift and periodic solutions by analyzing many bifurcation diagrams.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.6 no.1
• /
• pp.37-42
• /
• 2010

The stay cylinder weld at the steam generator of Korean Standard Nuclear Power Plants is safety class I component and is subjected to be inspected by the volumetric examination such as ultrasonic method. As accessibility of this area is limited due to the narrow space and high radiation, the existing manual inspection method involves various difficulties. Moreover operators may be exposed to internal contamination by contaminated dust during the surface buffing process to improve the inspection reliability of this area. Recently the new automatic inspection system for stay cylinder welds has been developed. The inspection system basically consists of a driving assembly, data acquisition device and signal processing units. The driving assembly is classified by 1) the scanner for inspecting and buffing the weld, 2) pillars for guiding the scanner and 3) the base frame for loading and supporting pillars. The scanner has 4 sensor modules to inspect in 4 refracted angles and 4 incident directions. These components can be inserted into the skirt of the stay cylinder through the manway hole and assembled easily by one-touch in the skirt. Data acquisition device and signal processing units developed in previous works are also newly upgraded for better processing of data analysis and evaluation. The system has been successfully demonstrated not only in the mock-up but also in the field. In this paper, newly developed inspection system for the stay cylinder weld of the steam generator is introduced and their field applications are discussed.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.15 no.6
• /
• pp.720-729
• /
• 2005

In this paper, we design the indirect adaptive controller using Wavelet Neural Network(WNN) for unknown nonlinear systems. The proposed indirect adaptive controller using WNN consists of identification model and controller. Here, the WNN is used in both Identification model and controller The WNN has advantage of indicating the location in both time and frequency simultaneously, and has faster convergence than MLPN and RBFN. There are several training methods for WNN, such as GD, GA, DNA, etc. In this paper, we present the Extended Kalman Filter(EKF) based training method. Although it is computationally complex, this algorithm updates parameters consistent with previous data and usually converges in a few iterations. Finally, ore illustrate the effectiveness of our method through computer simulations for the Buffing system and the one-link rigid robot manipulator. From the simulation results, we show that the indirect adaptive controller using the EKF method has better performance than the GD method.

• Journal of Adhesion and Interface
• /
• v.17 no.1
• /
• pp.1-6
• /
• 2016

In this study, to replace a complicated process such as in the rubber component used in the adhesive of the shoe buffing, pretreatment with primers, we studied mechanical properties and adhesive properties with rubber compound added propanamine and 1,6-Hexanediamine. The adhesive properties rubber specimen added propanamine did not occurrence, but The adhesive properties rubber specimen added 1,6-Hexanediamine was occurrence. Also, the contact angle was decreased compared to not added NBR. And rubber compound added 6-Hexanediamine was smaller than the contact angle was evaluated in comparison to the added propanamine. $NH_2$ group on the rubber surface were confirmed with a peak at $1450{\sim}1550cm^{-1}$ in FT-IR spectrum. Rubber compound added propanamine and 1,6-Hexanediamine was reduced mechanical properties and decreased NBS resistance.

• Journal of the Korean Home Economics Association
• /
• v.40 no.2
• /
• pp.39-56
• /
• 2002

The purpose of this study was to review criticallu the current slates of researches in the area of consumer culture and to suggest several ways in which it can be improved. After analyzing 87 articles in major journals which have published during the 1980s, 1990s, the major findings are as follows: First, the articles in this field has increased sharply in latter half of 1990s. Second, the subjects of these researches can be divided into three. They are general consumption culture(including consumption value), abnormal consumer behavior(including overconsumption, addictive buying and conspicuous consumption) and pro-environmental consumer behavior. Third, the adolescents is most frequently researched. Fourth, same as other areas the major methodology is positivistic one which focuses the survey analysis to investigate the relationships of many variables. Implications are also discussed with respect to future research.

• Journal of the Korean institute of surface engineering
• /
• v.28 no.1
• /
• pp.23-33
• /
• 1995

AISI 304 stainless steel has high resistance to corrosion due to the presence of a self-healing chromium oxide film on the surface, which also accounts for the difficulty in plating. Surface cleaning of this alloy is of fundamental importance in gold plating since its effectiveness puts an upper limit on the quality of the final coating. The cleaning of AISI 304 stainless steel was investigated with elimination of artificial passive oxide film and degreasing of remaining buffing wax as stearic acid. The familiar cleaning methods i.e. ultrasonic cleaning, electro-cleaning and activation treatment were fabricated in this study. Activation treatment showed best cleaning efficiency for elimination of passive oxide film among these methods, which was also confirmed by AES (Auger electron spectrometer) analysis. However, the best condition of cleaning was obtained by combining these methods. Electrocleaning time, for degreasing the stearic acid layer, was decreased with increasing amount of added KCN.