• 대한토목학회논문집
• /
• 제31권1A호
• /
• pp.1-7
• /
• 2011

이 연구는 일정표면적 기둥의 좌굴하중에 관한 연구이다. 기둥단면의 변화깊이의 형상함수로는 선형 변단면을 채택하였다. 이러한 기둥의 좌굴형상을 지배하는 상미분방정식을 유도하기 위하여 축방향 압축력을 받는 기둥의 동적 평형방정식을 이용하였다. 수치해석 예에서는 회전-회전, 회전-고정, 고정-고정의 지점조건을 고려하였다. 수치해석의 결과로 각종 기둥변수들이 좌굴하중에 미치는 영향을 분석하였다. 특히, 일정표면적으로부터 최대 좌굴하중을 발생시킬 수 있는 기둥의 최강단면비와 그에 대응하는 최강좌굴하중을 산정하였다. 기둥 축에 횡방향 내부지점을 설치하여 좌굴하중을 증가시킬 수 있는 무변위 위치를 찾기 위하여 기둥의 좌굴형상을 산출하였다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2006년도 정기 학술대회 논문집
• /
• pp.689-696
• /
• 2006

This paper deals with the geometrical non-linear analyses of the buckled columns. Differential equations governing elasticas of the buckled columns are derived, in which both effects of taper type and shear deformation are included. Three kinds of taper types such as breadth, depth and square tapers are considered. Differential equations are solved numerically to obtain the elasticas and buckling loads of such columns. End constraint of both clamped ends and both hinged ends are considered. The effects of shear deformation on the elastica of the buckled column and buckling load of column are investigated extensively. Experimental studies are presented that complement theoretical results of non-linear responses of the elasticas.

• 대한토목학회논문집
• /
• 제29권1A호
• /
• pp.53-60
• /
• 2009

이 논문은 양단회전 후좌굴 변단면 기둥의 기하 비선형 해석에 관한 연구이다. 기둥의 변단면은 변화폭, 변화깊이, 정방형 변단면으로 채택하였다. Bernoulli-Euler 보 이론을 이용하여 후좌굴 기둥의 정확탄성곡선을 지배하는 미분방정식을 유도하였다. 이 미분방정식은 두 개의 미지수를 가지며 이러한 미분방정식을 풀 수 있는 수치해석 방법을 개발하였다. 후좌굴 기둥의 수치해석 결과로 평형경로, 정확탄성곡선 및 합응력을 산정하였다. 실험을 통하여 후좌굴 거동의 이론을 검증하였다.

• Earthquakes and Structures
• /
• 제24권2호
• /
• pp.97-109
• /
• 2023

This experimental study investigates the effectiveness of applying carbon fiber reinforced polymer (CFRP) jackets for the retrofit of short reinforced concrete (RC) columns with inadequate transverse reinforcement and stirrup spacing to longitudinal rebar diameter equal to 12. RC columns scaled at 1/3, with round and square section, were subjected to axial compression up to failure. A damage scale is introduced for the assessment of the damage severity, which focusses on the extent of buckling of the longitudinal rebars. The damaged specimens were subsequently repaired with unidirectional CFRP jackets without any treatment of the buckled reinforcing bars and were finally re-tested to failure. Test results indicate that CFRP jackets may be effectively applied to rehabilitate RC columns (a) with inadequate transverse reinforcement constructed according to older practices so as to meet modern code requirements, and (b) with moderately buckled bars without the need of previously repairing the reinforcement bars, an application technique which may considerably facilitate the retrofit of earthquake damaged RC columns. Factors for the estimation of the reduced mechanical properties of the repaired specimens compared to the respective values for intact CFRP-jacketed specimens, in relation to the level of damage prior to retrofit, are proposed both for the compressive strength and the average modulus of elasticity. It was determined that the compressive strength of the retrofitted CFRP-jacketed columns is reduced by 90% to 65%, while the average modulus of elasticity is lower by 60% to 25% in respect to similar undamaged columns jacketed with the same layers of CFRP.

• 대한토목학회논문집
• /
• 제28권6A호
• /
• pp.827-833
• /
• 2008

이 논문은 elastica형 아치의 자유진동에 관한 연구이다. Elastica형 아치의 선형은 항상 일정한 곡선길이를 갖는 후좌굴 기둥의 정확탄성곡선을 이용하였다. 이 Elastica형 아치의 곡률항을 일반아치의 자유진동을 지배하는 미분방정식에 적용하여 고유진동수 및 진동형을 산출하였다. 수치해석 예에서는 회전-회전, 회전-고정 및 고정-고정의 지점조건을 고려하였다. 회전관성이 고유진동수에 미치는 영향을 분석하고, 아치의 높이비 및 세장비와 고유진동수와의 관계를 그림에 나타내었다. Elastica형 아치와 포물선형 아치의 고유진동수를 비교한 결과, elastica형 아치의 고유진동수가 포물선 아치의 고유진동수보다 매우 크게 나타나는 동적 특성을 보였다. 진동형의 전형적인 예를 그림에 나타내었다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2001년도 가을 학술발표회 논문집
• /
• pp.369-374
• /
• 2001

This paper deals with the buckling loads of column with rotation end restricted by rotational spring. The ordinary differential equations governing the buckling loads of such column is derived as nondimensional forms, and also its boundary conditions are derived. The buckled column model is based on the classical Bemoulli-Euler beam theory. The Runge-Kutta method and Regula-Falsi method are used to perform the integration of the differential equations and to determine the eigenvalue. The numerical methods developed herein for the buckling loads of the such column are found to be efficient and reliable. It is expected that the results obtained herein can be practically utilized in the structural engineering field.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2006년도 정기 학술대회 논문집
• /
• pp.935-940
• /
• 2006

Numerical methods are developed for solving the elastica and buckling load of cantilever column with constant volume, subjected to a compressive end load. The linear, parabolic and sinusoidal tapers with the regular polygon cross-sections are considered, whose material volume and span length are always held constant. The differential equations governing the elastica of buckled column are derived. The Runge-Kutta method is used to integrate the differential equations, and the Regula-Falsi method is used to determine the horizontal deflection at free end and the buckling load, respectively. The numerical methods developed herein for computing the elastica and the buckling loads of the columns are found to be efficient and reliable.

• Structural Engineering and Mechanics
• /
• 제28권2호
• /
• pp.221-238
• /
• 2008

Numerical solution to buckling analysis of beams and columns are obtained by the method of differential quadrature (DQ) and harmonic differential quadrature (HDQ) for various support conditions considering the variation of flexural rigidity. The solution technique is applied to find the buckling load of fully or partially embedded columns such as piles. A simple semi- inverse method of DQ or HDQ is proposed for determining the flexural rigidities at various sections of non-prismatic column ( pile) partially and fully embedded given the buckling load, buckled shape and sub-grade reaction of the soil. The obtained results are compared with the existing solutions available from other numerical methods and analytical results. In addition, this paper also uses a recently developed technique, known as the differential transformation (DT) to determine the critical buckling load of fully or partially supported heavy prismatic piles as well as fully supported non-prismatic piles. In solving the problem, governing differential equation is converted to algebraic equations using differential transformation methods (DT) which must be solved together with applied boundary conditions. The symbolic programming package, Mathematica is ideally suitable to solve such recursive equations by considering fairly large number of terms.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1996년도 가을 학술발표회 논문집
• /
• pp.3-10
• /
• 1996

Numerical methods are developed for solving the buckling loads and the elastica of clamped- free columns of circular cross-section with constant volume. The column model is based rut the Timoshenko beam theory. The Runge-Kutta and Regula-Falsi methods, respectively, are used to solve the governing differential equations and to compute the eigenvalues. Extensive numerical results, including buckling loads, elastica of buckled shapes and effects of shear de-formation, are presented in non-dimensional form for elastic columns whose radius of circular cross-section varies both linearly and parabolically with column length.

• 한국소음진동공학회논문집
• /
• 제16권10호
• /
• pp.1074-1081
• /
• 2006

This paper deals with the dynamic stability analysis of clamped-hinged columns with constant volume. Numerical methods are developed for solving natural frequencies and buckling loads of such columns, subjected to an axial compressive load. The parabolic taper with the regular polygon cross-section is considered, whose material volume and column length are always held constant. Differential equations governing both free vibrations and buckled shapes of such columns are derived. The Runge-Kutta method is used to integrate the differential equations, and the Regula-Falsi method is used to determine natural frequencies and buckling loads, respectively. The numerical methods developed herein for computing natural frequencies and buckling loads are found to be efficient and robust. From the numerical results, dynamic stability regions, dynamic optimal shapes and configurations of strongest columns are reported in figures and tables.