• 상하수도학회지
• /
• 제16권6호
• /
• pp.710-716
• /
• 2002

A General Pipe Break Prediction Model that incorporates linear and exponential models in its form is developed. The model is capable of fitting pipe break trends that have linear, exponential or in between of linear and exponential trend by using a weighting factor. The weighting factor is adjusted to obtain a best model that minimizes the sum of squared errors of the model. The model essentially plots a best curve (or a line) passing through "cumulative number of pipe breaks" versus "break times since installation of a pipe" data points. Therefore, it prevents over-predicting future number of pipe breaks compared to the conventional exponential model. The optimal replacement time equation is derived by using the Threshold Break Rate equation by Loganathan et al. (2002).

• Genomics & Informatics
• /
• 제17권4호
• /
• pp.40.1-40.9
• /
• 2019

While studies aimed at detecting and analyzing indels or single nucleotide polymorphisms within human genomic sequences have been actively conducted, studies on detecting long insertions/deletions are not easy to orchestrate. For the last 10 years, the availability of long read data of human genomes from PacBio or Nanopore platforms has increased, which makes it easier to detect long insertions/deletions. However, because long read data have a critical disadvantage due to their relatively high cost, many next generation sequencing data are produced mainly by short read sequencing machines. Here, we constructed programs to detect so-called unmapped regions (UMRs, where no reads are mapped on the reference genome), scanned 40 Korean genomes to select UMR long deletion candidates, and compared the candidates with the long deletion break points within the genomes available from the 1000 Genomes Project (1KGP). An average of about 36,000 UMRs were found in the 40 Korean genomes tested, 284 UMRs were common across the 40 genomes, and a total of 37,943 UMRs were found. Compared with the 74,045 break points provided by the 1KGP, 30,698 UMRs overlapped. As the number of compared samples increased from 1 to 40, the number of UMRs that overlapped with the break points also increased. This eventually reached a peak of 80.9% of the total UMRs found in this study. As the total number of overlapped UMRs could probably grow to encompass 74,045 break points with the inclusion of more Korean genomes, this approach could be practically useful for studies on long deletions utilizing short read data.

• Journal of Information Technology Applications and Management
• /
• 제12권2호
• /
• pp.15-27
• /
• 2005

Text categorization systems generally use single words (unigrams) as features. A deceptively simple algorithm for improving text categorization is investigated here, an idea previously shown not to work. It is to identify useful word pairs (bigrams) made up of adjacent unigrams. The bigrams it found, while small in numbers, can substantially raise the quality of feature sets. The algorithm was tested on two pre-classified datasets, Reuters-21578 for English and Korea-web for Korean. The results show that the algorithm was successful in extracting high quality bigrams and increased the quality of overall features. To find out the role of bigrams, we trained the Na$\"{i}$ve Bayes classifiers using both unigrams and bigrams as features. The results show that recall values were higher than those of unigrams alone. Break-even points and F1 values improved in most documents, especially when documents were classified along the large classes. In Reuters-21578 break-even points increased by 2.1%, with the highest at 18.8%, and F1 improved by 1.5%, with the highest at 3.2%. In Korea-web break-even points increased by 1.0%, with the highest at 4.5%, and F1 improved by 0.4%, with the highest at 4.2%. We can conclude that text classification using unigrams and bigrams together is more efficient than using only unigrams.

• 전자공학회논문지B
• /
• 제31B권4호
• /
• pp.115-122
• /
• 1994

Roberige had proposed a method of linear approximation using strips. This method is known to be fast relatively, and the distance between the given curve and calculated straight line is not greater than an allowable error. But this method generates many break points. Later, Leng and Yang proposed the dynamic strip algorithm with the rotation of strips which reduced the number of greak points at the sacrifice of the speed. The method using the seperate rotation of two strip lines proposed in this paper is faster than Leng and Yang's but generates almost the same number of break points as Leng and Yang's.

• 한국컴퓨터정보학회논문지
• /
• 제17권2호
• /
• pp.87-94
• /
• 2012

기계적 제동방식이 사용되는 전동차는 공기제동과 전기제동을 혼합한 방식으로 최근 녹색성장을 지향하면서 효율개선 및 환경문제 해결을 위한 많은 방법들이 제시되고 있다. 기계적인 제동은 분진, 소음 등의 환경문제와 함께 브레이크 슈와 라이닝 등의 소모품을 교체해야하는 경제적 문제를 가지고 있다. 이러한 단점을 보완하기 위하여 고속 영역에서 정지에 이르는 광범위한 영역에 이르기까지의 전기제동을 필요로 하게 되었다. 본 연구는 구배에 의한 부하토오크를 추정하여 전동차를정지시키는방법에대해연구되어졌으며낙차에따른 토오크를 추정하여 제동하는 방법의 특성을 확인하였다.

• 대한조선학회논문집
• /
• 제58권2호
• /
• pp.90-96
• /
• 2021

In this study, the method of determining the state of grid points in the adaptable surface particle method based on grid system developed as a free-surface tracing method was improved. The adaptable surface particle method is a method of determining the state of the grid point according to the shape of the free-surface and obtaining the intersection of the given free-surface and grid line where the state of the grid point changes. It is difficult to determine the state of grid points in the event of rapid flow, such as collision or separation of free-surfaces, and this study suggests a method for determining the state of current grid points using the state of surrounding grid points where the state of grid point are known. A grid layer value was assigned sequentially to a grid away from the free-surface, centering on the boundary cell where the free-surface exists, to identify the connection information that the grid was separated from the free-surface, and to determine the state of the grid point sequentially from a grid away from the free-surface to a grid close to the free-surface. To verify the improved method, a numerical analysis was made on the problem of dam break in which a sudden collision of free-surface occurred and the results were compared, and the results were relatively reasonable.

• 보건행정학회지
• /
• 제13권4호
• /
• pp.84-98
• /
• 2003

This research objective is to determine the optimal price break points for n­block tariff, because comparing non­linear pricing with uniform pricing on the basis of profit, n­block tariff outperforms two­part tariff, all unit discount price schedule, and uniform pricing. Although the merits of non­linear pricing are well documented, the attempt to practice the non-linear pricing in medical service sector has been relatively rare. The determination of the parameters under n­block tariff is the interesting decision making agenda for marketers. Under n­block tariff, the marketers should decide the optimal price break points and the optimal marginal price for each price zone. The results can be summarized as follows: The researchers found that mixture model can be the feasible methodology for determining the optimal number of n­block tariff and identifying the optimal segmentation criteria. We demonstrate the feasibility and the superiority of the mixture model by applying it to the database of medical examination. The results appear that the number of patients per month can be the optimal segmentation variable. And 6­block tariff is the optimal price break for this medical service.

• 한국측량학회지
• /
• 제29권5호
• /
• pp.441-448
• /
• 2011

최근 디지털 항공사진을 이용한 수치도화가 보편화 되었으며 이로 인해 지표에 대한 3차원 데이터를 정확하게 획득하고 있다. 도화원도는 도화사가 지표를 육안으로 확인하여 제작한 신뢰 있는 3차원 데이터이며 등고선과 표고점 이외에도 지형지물에 대해 3차원 좌표를 가지고 있는 점, 선으로 표현되었을 뿐 아니라 레이어로 분류되어 활용성이 매우 크다. 본 연구에서는 도화원도를 이용해 정밀하고 정확한 수치표고모델을 제작하고자 한다. 이를 위해 수치지형도에서 등고선과 표고점 레이어를 추출하였고 도화원도에서 Break Line을 추출하여 각각 수치표고모델을 제작하였으며 이 두 결과를 비교하였다. 비교를 위해 주거지, 산지, 농경지, 제방 등 경사가 완만하거나 복잡한 지형을 연구지역으로 선정하여 최적의 수치표모델이 제작될 때까지 반복적으로 레이어를 삭제하면서 Break Line을 추출하였다. 그 결과 도화원도에서 등고선과 표고점 레이어를 비롯해 8개의 도로 레이어 및 2개의 경계 레이어를 Break Line으로 추출하였으며 이를 이용해 더욱 정밀한 수치표고모델을 획득할 수 있었다. 또한 교차하거나 접하는 Break Line을 편집하여 복잡하고 변위가 급격한 지형에서 수치표고모델의 왜곡현상을 최소화할 수 있었다.

• Journal of Biosystems Engineering
• /
• 제15권3호
• /
• pp.177-185
• /
• 1990

The break of rotary blade is occured from a stress concentration of the inside of blade by the outside impulsive load. In order to examine its inside stress and stress concentration of rotary blade, a epoxy plate which is suitable to applicate by photoelastic system is used to experiment. These results are summarized as follow. 1. Refer to the existence of bolt hole and a size of its of rotary blade, a stress concentration which cause the break of rotary blade is not exposed. 2. It is expected to be break to section of hold of rotary blade and the break of this is due to that there are concentrated by shearing force, bending moment and bending stress. 3. When the crack which caused from processing are set up to any location, the stress concentration taken to the creak point. 4. Without regard to the location of the reaction points of rotary blade, the bending stress which is greated than the bending moment is occured within about 6 em toward the center line of bolt hole and it was possible to break that section.

• 한국수소및신에너지학회논문집
• /
• 제26권1호
• /
• pp.35-44
• /
• 2015

This paper deals with the economic analysis of domestic fuel cell vehicles considering subsidy and hydrogen price in 2015 and 2025. We selected TFCV (Tucson fuel cell vehicle) and TDV (Tucson diesel vehicle) to identify the economic feasibility of fuel cell vehicles compared with conventional internal combustion engine vehicles. We made some sensitivity analysis by changing input factors such as the size of the subsidy, the hydrogen price and the discount rate. Also, we made a break-even point analysis on hydrogen prices that equalize the economic feasibility of TFCV and TDV in 2025. As a result, TFCV is not economical in 2015 due to the relatively high prices of hydrogen and vehicles. If the sale prices of TFCV are 30,000,000 won and 35,000,000 won in 2025, then the break-even points of hydrogen prices are equal to 7,483 won/kg and 5,043 won/kg.