• Polymer(Korea)
• /
• v.34 no.5
• /
• pp.485-489
• /
• 2010

Poly(lactic acid)(PLA) has been modified by electron radiation in the presence of 5 phr glycidyl methacrylate (GMA) to enhance the melt strength of PLA. The modified PLA was prepared by varying the dose of irradiation and was characterized by observing the thermal properties, the melt viscoelastic properties and the gel fraction. The irradiated PLA with 300 kGy in the presence of 5 phr GMA showed drastically improved complex viscosity and storage modulus properties: a complex viscosity of about 210 times higher and a storage modulus of 14500 times higher than those of virgin PLA when measured at a frequency of 0.1 rad/s. Gel fraction study revealed that a branching reaction was more dominant than a crosslinking reaction when the PLA was irradiated with less than 200 kGy.

• KSBB Journal
• /
• v.16 no.2
• /
• pp.188-199
• /
• 2001

A gene encoding the dextransucrase(dsCB) that synthesizes mostly $\alpha-(1\rightarrow6)$ linked dextran with low amount(10%) of $\alpha-(1\rightarrow3)$ branching was cloned and sequenced from Leuconostoc mesenteroides B-742CB. The 6.1 kbp DNA fragment carrying dsCB showed one open reading frame(ORF) composed of 4,536bp. The deduced amino acid sequence shows that it begins from the start codon(ATG) at position 698 of the cloned DNA fragment and extends to the termination condon(TAA) at position 5,223. The enzyme is consisted of 1,508 amino acids and has an calculated molecular mass of 168.6kDa. This calculated Mw was in good agreement with an activity band of 170kDa on non-denaturing SDS-PAGE. A recombinant E. coli DH5 $alpha$ harboring pDSCB produced extracellular dextransucrase in 2% sucrose medium, and synthesized both soluble and insoluble dextran. To compare the properties of enzyme with B-742CB dextransucrase, the acceptor reaction, hydrolysis of dextran and methylation were performed. The expressed enzyme showed the same properties as B-742CB dextransucrease, but its ability to synthesize $\alpha-(1\rightarrow3)$ branching was lower than that of B-742CB dextransucrase. In order to identify the critical amino acid residues known as conserved regions related to catalytic activity, Asp-492 was replaced with Asn. D492N resulted in a 1.6 fold decrease in specific activity.

• Journal of Microbiology and Biotechnology
• /
• v.16 no.1
• /
• pp.102-108
• /
• 2006

The IscA gene, encoding a levansucrase of 424 amino acids (aa) residues, was cloned from the genomic DNA of Pseudomonas aurantiaca S-4380, and overexpressed in Escherichia coli. The recombinant levansucrase overexpressed in E. coli was then used to produce levan from sucrose. Levan crystals with 98% purity could be obtained from the reaction mixture with $62\%$ yield using an alcohol precipitation method. The molecular weight of the levan was $7\times10^5$ daltons. Methylation studies showed that the levan was branched: main linkage C-2,6; branched linkage C-2,1; and degree of branching $6\%$. Three bacterial levans from different strains were incubated with levan fructotransferase (LFTase) from Arthrobacter ureafaciens K2032, which produced $di-\beta-D-fructofuranose$ dianhydride IV (DFA IV); final conversion yields from the levans to DFA IV were $39\%$ in Zymomonas mobilis, $53\%$ in Serratia levanicum, and $59\%$ in P. aurantiaca S-4380 levansucrase. The levan from P. aurantiaca S-4380 levansucrase gave the highest conversion yield of levan to DFAIV so far reported.

• Journal of the Korean Ceramic Society
• /
• v.25 no.3
• /
• pp.261-267
• /
• 1988

$\beta$-Sialon powder was prepared by the reduction-nitridation reaction from the mixture of Wando Pyrophyllite and carbon black at 135$0^{\circ}C$ in $N_2$ atmosphere. $\beta$-SiC powder was added to the prepared $\beta$-Sialon powder to make $\beta$-Sialon-SiC composite. The $\beta$-Sialon-SiC composites were sintered pressurelessly at 175$0^{\circ}C$ for 2h, using $Y_2O_3$ and $ZrO_2$(monoclinic) as sintering aids. Comparatively higher values of the fracture toughness (3.8 MN/㎥/2), M.O.R. (470 MN/$m^2$) and vickers microhardness (13.7 MN/$m^2$) were obtained when 10 wt% $Y_2O_3$ was added as a sintering aid. The improved fracture toughness and M.O.R. are assumed to be the results of crack deflection and crack branching by the second phase SiC particles.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.4
• /
• pp.146-153
• /
• 2007

The detailed chemistry with reaction mechanism of GRI 2.11, which consists of 49 species and 279 elementary reactions, have been numerically conducted to investigate the flame structure and NO emission characteristics in a non-premixed counterflow flame of blended fuel of $H_2/CO_2/Ar$. The combination of $H_2,\;CO_2$, and Ar as fuel is selected to clearly display the contribution of hydrocarbon products to flame structure and NO emission characteristics due to the breakdown of $CO_2$. Radiative heat loss term is involved to correctly describe the flame dynamics especially at low strain rates. All mechanisms including thermal, $NO_2,\;N_2O$, and Fenimore are also taken into account to separately evaluate the effects of $CO_2$ addition on NO emission characteristics. The increase of added $CO_2$ quantity causes flame temperature to fall since at high strain rates diluent effect is prevailing and at low strain rates the breakdown of $CO_2$ produces relatively populous hydrocarbon products and thus the existence of hydrocarbon products inhibits chain branching. It is also found that the ratio of the contribution by Fenimore mechanism to that by thermal mechanism in the total mole production rate becomes much larger with increase in the $CO_2$ quantity and strain rate, even though the absolute quantity of NO production is deceased. Consequently, as strain rate and $CO_2$ quantity increase, NO production by Fenimore mechanism is remarkably augmented.

• Polymer(Korea)
• /
• v.24 no.5
• /
• pp.610-620
• /
• 2000

Vinyl acetate (VAc) was polymerized at 30, 40, and 5$0^{\circ}C$ using 2,2'-azobis (2,4-dimethylvaleronitrile) (ADMVN) and tertiary butyl alcohol (TBA) as the initiator and the solvent, respectively. High molecular weight (HMW) atactic poly(vinyl alcohol) (PVA) was prepared by saponifying the poly(vinyl acetate) (PVAc) synthesized. The effect of polymerization conditions were investigated in terms of conversion, degree of branching for acetyl group of PVAc, and molecular weight of both PVAc and PVA. The polymerization rate of VAc in TBA was proportional to the 0.49th power of ADMVN concentration in good accordance with the theoretical value of 0.5. HMW-PVA with high yield could be obtained successfully, probably due to lower polymerization temperature and decreased chain transfer reaction rate which was achieved by adopting ADMVN and TBA. PYAc having average degree of polymerization (P$_{n}$) of 10000~13000 was obtained at the conversion of 35~70%. Saponification of so prepared PVAc yielded PVA having P$_{n}$ of 2400~6100. The syndiotactic diad content increased with decreasing polymerization temperature and increasing VAc concentration due to a steric hindrance effect of TBA during polymerization.

• Korean journal of food and cookery science
• /
• v.27 no.5
• /
• pp.507-522
• /
• 2011

In this study, samples of wheat flour and dough were prepared by adding of 1, 3, or 5% branched dextrin, which is produced from the amylopectin of waxy corn starch using a cyclization reaction with a branching enzyme. The samples were then evaluated qualitatively in terms of farinogram, viscogram, and extensogram characteristics. The fermentation power of dough expansion, extensogram characteristics, specific volume, baking loss, external/internal surface appearance, and sensory qualities were also examined after 4 weeks of storage at -20$^{\circ}C$ to determine the effect on freeze-thaw stability and quality improvement of branched dextrins in the soft roll bread formulation. Furthermore, the samples along with a control were compared regarding their quality characteristics, including changes in moisture content, water activity, color, and textural characteristics during a storage period of 4 days at 20$^{\circ}C$ to determine the effect on preventing retrogradation of the branched dextrin. As the branched dextrin content increased, area and extensibility increased, whereas water absorption, fermentation power of dough expansion, resistance/extensibility ratio, baking loss, and brownness of the crust decreased. However, the control group presented significantly higher peak viscosity, resistance, specific volume, taste, overall acceptability, moisture content, water activity, springiness, cohesiveness, and resilience values than those of the branched dextrin samples, whereas lightness, hardness, and chewiness showed the reverse effect. As the storage period increased, lightness, hardness, and chewiness increased, whereas cohesiveness decreased. In conclusion, the results indicate that adding 1~3% branched dextrin into a soft roll bread formulation from frozen dough had no positive effect on freeze-thaw stability or preventing retrogradation but may provide good nutritional properties.

• Journal of Veterinary Science
• /
• v.23 no.5
• /
• pp.73.1-73.8
• /
• 2022

Background: Lumpy skin disease (LSD), a disease transmitted by direct and indirect contact with infected cattle, is caused by the Lumpy skin disease virus (LSDV). The disease affects cattle herds in Africa, Europe, and Asia. The clinical signs of LSD range from mild to the appearance of nodules and lesions in the skin leading to severe symptoms that are sometimes fatal with significant livestock economic losses. Objectives: This study aimed to characterize LSDV strains in the blood of infected cattle in Thailand based on the GPCR gene and determine the phylogenetic relationship of LSDV Thailand isolates with published sequences available in the database. Methods: In total, the blood samples of 120 cattle were collected from different farms in four provinces in the northeastern part of Thailand, and the occurrence of LSDV was examined by PCR based on the P32 antigen gene. The genetic diversity of LSDV based on the GPCR gene was analyzed. Results: Polymerase chain reaction assays based on the P32 antigen gene showed that 4.17% (5/120) were positive for LSDV. All positive blood samples were amplified successfully for the GPCR gene. Phylogenetic analysis showed that LSDV Thailand isolates clustered together with LSDVs from China and Russia. Conclusions: The LSD outbreak in Thailand was confirmed, and a phylogenetic tree was constructed to infer the branching pattern of the GPCR gene from the presence of LSDV in Thailand. This is the first report on the molecular characterization of LSDV in cattle in Thailand.

• Restorative Dentistry and Endodontics
• /
• v.24 no.1
• /
• pp.100-115
• /
• 1999

The purpose of this study was to investigate the distribution of calcitonin gene-related peptide containing nerve fibers in rat pulp after dentinl injury by means of immunohistochemistry and confocal laser scanning microscope. The Spague-Dawley rats weighing about 250-300gm were used. The animals were devided into normal control and experimental groups. Experimental animals were sacrified 1, 2, 4, 7, 10, 21days after dentinal injury (dentin cutting, and then acid etching with 35% phosphoric acid) on the maxillary molar teeth. The maxillary teeth and alveolar bone were removed and immersed in the 4% paraformaldehyde in 0.1M phosphate buffer (pH 7.4), then were decalcified with 15% formic acid for 10 days. Serial frozen $50{\mu}m$ thick sections were cut on a cryostat. The rabbit CGRP antibody was used as a primary antibody with a dilution of 1:2000 in 0.01M PB. The sections were incubated for 48 hours at $4^{\circ}C$, and placed into biotinylated antirabbit Ig G as a secondary anti body with dilution of 1:200 in 0.01M PB and incubated in ABC(avidin-biotin complex). The peroxidase reaction was visualized by incubating the sections in 0.05% 3,3 diaminobenzidine tetrahydrochloride containing 0.02% $H_2O_2$. For the confocal laser scanning microscopic examination, Primary antibody reaction was same as immunoperoxidase stainning, but fluorescein isothiocyanate(FITC)-conjugate antirabbit IgG as a secondary antibody was used. The confocal laser scanning microscope was used for the examination. A series of images of optical sections was collected with a 20x objective at $3{\mu}m$ intervals throughout the depth of specimen. FITC fluerescence was registrated through a 488nm and 568nm excitation filter, and images were saved on optical disk. The stereoscopic images and three dimentionnal images were reconstructed by computer software, and then were analyzed. The results were as follows : 1. In normal control group, CGRP containing nerve fibers were coursed through the root with very little branching, and then formed a dense network of terminals in coronal pulp. 2. A slight increase in CGRP containing nerve fibers at 1 and 2day postinjury was noted subjacent to the injury site. In the 4day group, there were an extensive increase in the number of reactive fibers, followed by a partial return toward normal levels at 7~10 day postinjury, and return by 21days. 3. The sprouting of the CGRP containing nerve fibers was evident within 2day after dentinal injury, and by 4days there was a maximal increased, but was decreased at 7days and returned to normal 10~21 day postinjury. 4. In confocal laser scanning microscopic exammination, the distinct distribution pattern and sprouting reaction of CGRP containing nerve fibers were observed in stereoscopic images and three dimentional images. These results suggest that CGRP containing nerve fiber can be important role in the response to dental injury and pain regulation.

• Clean Technology
• /
• v.26 no.3
• /
• pp.204-210
• /
• 2020

In this study, the ignition characteristics of bio jet fuel (Bio-7629, Bio-5172) produced by F-T process and petroleum-based jet fuel (Jet A-1) were compared and analyzed. The ignition delay time of each fuel was measured by means of a combustion research unit (CRU) and the results were explained through an analysis of the properties and composition of the fuel. The ignition delay time of Bio-5172 was the shortest while that of Jet A-1 was the longest because Jet A-1 had the highest surface tension and Bio-5172 had the lowest viscosity in terms of fuel properties that could affect the physical ignition delay time. As a result of the analysis of the constituents' type and ratio, 22.8% aromatic compounds in Jet A-1 could generate benzyl radical, which had low reactivity during the oxidation reaction, affecting the increase of ignition delay time. Both Bio-7629 and Bio-5172 were composed of paraffin only, with the ratio of n-/iso- being 0.06 and 0.80, respectively. The lower the degree of branching is in paraffin, the faster the isomerization of peroxy radical is produced during oxidation, which could determine the propagation rate of the ignition. Therefore, Bio-5172, composed of more n-paraffin, possesses shorter ignition delay time compared with Bio-7629.