• Journal of Korean Institute of Industrial Engineers
• /
• v.21 no.1
• /
• pp.103-118
• /
• 1995

This paper is concerned with developing flow control method for a dynamic multistage manufacturing system with interstage buffers and unreliable machines. For the effective control of proposed manufacturing system, the three-level hierarchical scheme is introduced. At the top level, we collect the system data and then, design the buffer sizes and hedging points. Short-term production rates are calculated at the middle level. At the bottom level, actual dispatching times are determined by Clear the Largest Buffer Level rule. The control method utilizes the material and the space in the buffers to alleviate the propagation of a failure to other machines in the system and keeps the production close to demand. Finally, a numerical example is provided to illustrate the mathematical control method developed and implemented in a dynamic manufacturing environment.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.4
• /
• pp.301-308
• /
• 2015

In this paper, we propose an LTBC (Low Tension and Load Balance Control) scheme to improve a coiling shape control by reduction the tension fluctuation by the torque disturbance in the down coiler process of hot strip mills. The proposed controller is a combination of an LTC to control the overload at load-on in the mandrel and an LBC to regulate the load balance of the upper and bottom pinch roll. A tension calculation model is suggested with the concept of the tension deviation. The effectiveness of the proposed control scheme is verified from simulation under a disturbance of the pinch roll torque. Using a field test, we show that the performance of the shape and tension control is improved by the LTBC control.

• Journal of Bio-Environment Control
• /
• v.8 no.1
• /
• pp.49-55
• /
• 1999

This study aims at analyzing environment factors of two tier cropping systems and suggesting effective structures of two tier cropping systems. The environment factors in two tier cropping systems are temperature, relative humidity, solar radiation, temperature of nutrient solution, and wind velocity. Especially, The most important factors are the solar radiation and the solar incident area between the two tiers. During the experiment, observations were made of the two levels in the plastic greenhouse. The highest temperatures were 38.3$^{\circ}C$ in the top level and, 35.5$^{\circ}C$ in the bottom level, respectively. The temperature of the nutrient solution between the two levels showed little difference. The relative humidity in the top level was 60~7o% and that in the bottom 65~80%, exhibiting that the bottom is approximately 10% higher. Change of photosynthetic photon flux density and solar radiation both have a tendency to be similar. The wind velocities for both levels were recorded at 0.1m.s$^{-1}$ in the afternoon and 0.05m.s$^{-1}$ in the evening. The solar incident areas in the bottom level increased by approximately 25% at an East-West position and 17.7% at a South-North position, respectively.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2002.11a
• /
• pp.147-153
• /
• 2002

Due to the growth of population and industrial development at the coastal cities, there has been much increase in necessity to effective control of the wastes into the coastal water and river. The amount of disposal at those waters has been increased rapidly and it is necessary for us to track of it in order to keep the water clean. The investigation and research related to the water quality in this region have been conducted continuously but the systematic survey of the disposed wastes at the bottom was neglected and/or minor. In this study we surveyed the status of disposed waste distribution at the bottom coastal water and river from the scanned images. The intensity of sound received by the side scan sonar tow vehicle from the sea floor provides information as to the general distribution and characteristics of the superficial wastes. The port and starboard side scanned images produced from a transducer borne on a tow fish connected by tow cable to a tug boat have the area with width of 22m∼112m, and band of 44m∼224m. All data are displayed in real-time on a high-resolution color display (1280 ${\times}$ 1024 pixels) together with position information by DGPS. From the field measurement and analysis of the recorded images, we could draw the location and distribution of bottom disposals. Furthermore, we made a database system which might be fundamental for planning the waste reception and process control system.

• Journal of the Korea Concrete Institute
• /
• v.23 no.6
• /
• pp.773-780
• /
• 2011

In this study, thermal stress analysis are carried out considering material properties, curing condition, ambient temperature, and casting date of the mass concrete placed in bottom slab and side wall of the in-ground type LNG tank as a super massive structure. Also, based on the numerical results, cracking possibility is predicted and counter measures to prevent the cracking are proposed. For the tasks, two optimum mix proportions were selected. From the results of the thermal stress analysis, the through crack index of 1.2 was satisfied for separately caste concrete lots except for the bottom slab caste in 2 separate sequences. For the double caste bottom slab, it is necessary introduce counter measures such as pre-cooling prior to the site construction. Also, another crack preventive measure is to lower the initial casting temperature by $25^{\circ}C$ or less to satisfy 1.2 through crack index criterion. In the $1^{st}$ and $2^{nd}$ caste bottom slab, the surface crack index was over 1.2. Therefore, the surface cracks can be controlled by implementing the curing conditions proposed in this study. Since the side wall's surface crack index was over 1.0, it is safe to assume that the counter preventive measures can control width and number of cracks.

• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.9
• /
• pp.700-706
• /
• 2003

This paper presents a 3D last design system that provides the 3-dimensional last data based on the FFD(Free Form Deformation) method. The proposed system utilizes the control points for deformation factor to convert from the 3D point cloud foot data to the 3D point cloud last data. The deformation factor of the FFD is obtained from the conventional last design technique, and constructed on the FFD lattice based on the bottom view and lateral view of the measured 3D point cloud foot data. In addition, the control points of FFD lattice is decided on the anatomical points of foot. The deformed 3D last obtained from the proposed FFD is saved as a 3D dxf foot data. The experimental results demonstrate that the proposed system have the descent 3D last data based on the openGL window.

• 제어로봇시스템학회:학술대회논문집
• /
• 1986.10a
• /
• pp.238-243
• /
• 1986

Distillation columns are widely used in almost every chemical plant. The use of multivariable control for such units is attractive because of the strong interactions exhibited between outputs and inputs and the desire to control simultaneously both top and bottom products. In this research design of a robust multivariable controller for distillation column was considered; output feedback controller with proportional and integral modes was designed using pole assignment. The transfer function matrix was obtained by fitting the step response realtions between single input double output pairs of variables. This matrix was then converted to linear time invariant state space model by multivariable realization technique. With the proposed multivariable proportional and integral controller applied to the process, the result of the digital computer simulation showed a good performance of asymtotic tracking. The limited experimental performance of this multivariable control was compared with the result from simulation. It was found that the proposed controller performed satisfactorily for the distillation column which separated binary mixture of methanol and water.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2012.04a
• /
• pp.56-59
• /
• 2012

최근 신재생 에너지 분야 가운데 풍력발전에 대한 관심이 높아지면서 관련 산업 분야의 연구 또한 활발히 수행되고 있다. 풍력발전기의 경우 초기 설치에 고가의 비용이 필요하며, 고장 발생 시 일반적으로 풍력발전기의 동작을 멈추게 한다. 본 논문에서는 풍력발전기의 Nacelle에서 발생하는 다양한 센서데이터를 수집하는 Bottom에서의 제어시스템을 다중화하여 고장 발생 시에도 풍력발전기의 중단 없이 지속적으로 에너지 생산이 가능하게 하는 고가용성 데이터베이스 시스템에 관한 것이다. 본 논문을 통해 개발된 고가용성 시스템을 통해 풍력 발전기의 높은 안정성을 보장하며, 수집된 데이터를 분석함으로서 고장에 대한 예측이 가능하다.

• Journal of Power Electronics
• /
• v.13 no.2
• /
• pp.197-205
• /
• 2013

In energy injection resonant AC-AC converters, due to the low frequency effect of the AC input envelope and the low energy injection losses requirement, the constant and steady control of the high frequency AC output envelope is still a problem that has not been solved very well. With the aid of system modeling, this paper analyzes the mechanism of the envelope pit on the resonant AC current. The computing methods for the critical damping point, the falling time and the bottom value of the envelope pit are presented as well. Furthermore, this paper concludes the stability precondition of the system AC output. Accordingly, an optimal control method for the AC output envelope is put forward based on the envelope prediction model. This control method can predict system responses dynamically under different series of control decisions. In addition, this control method can select best series of control decisions to make the AC output envelope stable and constant. Simulation and experimental results for a contactless power transfer system verify the control method.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.1
• /
• pp.16-25
• /
• 1995

The effects of leaf removal time on variation of nodal sink components in determinated soybean ［Glycine max （L.） Merr.］ cultivar 'Danyeobkong' were measured at the experiment field of Chonbuk Provincial Rural Development Administration in 1991. Node order in this experiment was calculated from terminal node to bottom node to clarify the photosynthetic ability of canopy leaves. The upper 5 leaves from terminal node of main stem were removed at 5, 15, 25, 35 and 45 days after flowering(DAF) respectively. In spite of light-receiving increment in lower part of main stem and in branch by removing the upper part leaves of main stem, seed weight of that part was not increased in leaf removal treatment compared with control block. The node position reducing pod went down from terminal to bottom by delaying leaf removal time, and the influence of pod number reduction was bigger in DAF 25 than in DAF 15. But the seed number reduction per pod was the biggest in DAF 35. Cracked seed coat ratio ranged from 25% to 35% in control block, while that of leaf removal block had mostly 10% gap compared with the control block.rol block.