• 한국세라믹학회지
• /
• 제47권6호
• /
• pp.618-622
• /
• 2010

Cost-effective purification methods of silicon were carried out in order to replace the conventional Siemens method for solar grade silicon. Firstly, acid leaching which is a hydrometallurgical process was preceded with grinded silicon powders of metallurgical grade (~99% purity) to remove metallic impurities. Then, plasma treatments were performed with the leached silicon powders of 99.94% purity by argon plasma at 30 kW power under atmospheric pressure. Plasma treatment was specifically efficient for removing Zr, Y, and P but not for Al and B. Another purification step by EB treatment was also studied for the 99.92% silicon lump which resulted in the fast removal of boron and aluminum. That means the two methods are effective alternative tools for removing the doping elements like boron and phosphor.

• 한국세라믹학회지
• /
• 제46권5호
• /
• pp.467-471
• /
• 2009

Effects of boron and carbon on the densification and thermal decomposition of an AlN-SiC-$TiB_2$ system were investigated. $SiO_2$ was mostly removed by the addition of carbon, while $Al_2O_3$ formed $Al_4O_4C$ and promoted the densification of the systems above $1850^{\circ}C$. Rather porous specimens were obtained without the additives after hot pressing at $2100^{\circ}C$, while densification was mostly completed at $2000^{\circ}C$ by using the additives. The sintering temperature decreased further to $1950^{\circ}C$ by applying spark plasma sintering. The additives promoted the shrinkage of AlN by forming a liquid phase which was originated from the carbo- and boro-thermal reduction of $Al_2O_3$ and AlN.

• 한국광물학회지
• /
• 제18권3호
• /
• pp.227-236
• /
• 2005

밀양점토광상의 알루미늄이 풍부한 다이아스포아 단괴에서 열수변질 기원 전기석은 집합체나 미립으로 산출한다 대부분의 전기석 결정은 미세한 대구조가 특징적인데, 이는 열수변질 작용동안 개방계의 유체혼합과 같은 변동이 심한 환경에서 형성되었음을 지시한다. 본 전기석의 화학적 진동누대 구조의 양상은 결정축의 방향과는 무관하게 흡사한 특징을 보인다. Mg는 결정성장 초기, Fe는 후기 단계동안에 부화되었으며, Fe/Mg의 비는 규칙적으로 진동함을 보여 준다. 화학분석, 후방산란영상(BSE), X-선 화학분석도에 따르면 전기석내 진동누대구조는 Fe와 Mg 함량변화에 주로 제어되었으며 봉소함량의 기여도는 미미하다. 전기석이 다이아스포아와 딕카이트로 변질되는 것으로 볼 때 전기석은 B, Fe, Mg의 활동도가 감소하면서 이들 고알루미나 광물에 비하여 불안정해 진다. 그러므로 열수계내 알루미늄 활동도가 전기석의 안정성을 제어하는 것으로 볼 수 있다.

• 한국분말재료학회지
• /
• 제5권3호
• /
• pp.199-209
• /
• 1998

A new low melting inorganic binder, monoclinic $HBO_2$, has been developed for Selective Laser Sintering (SLS) of alumina powder by dehydration process of boron oxide powder in a vacuum oven at $120^{\circ}C$. It led to better green SLS parts and higher bend strength far green and fired parts compared to other inorganic binders such as aluminum and ammmonium phosphate. This appeared to be due to its low viscosity and better wettability of the alumina particle surface. A low density single phase ceramic, aluminum borate ($Al_{18}B_4O_{33}$), and multiphase ceramic composites, $A_{12}O_3-A_{14}B_2O_9$, were successfully developed by laser processing of alumina-monoclinic $HBO_2$ powder blends followed by post-thermal processing; both $Al_{18}B_4O_{33}$ and $A_{14}B_2O_9$ have whisker-like grains. The physical and mechanical properties of these SLS-processed ceramic parts were correlated to the materials and processing parameters. Further densification of the $A_{12}O_3-A_{14}B_2O_9$ ceramic composites was carried out by infiltration of colloidal silica, and chromic acid into these porous SLS parts followed by heat-treatment at high temperature ($1600^{\circ}C$). The densities obtained after infiltration and subsequent firing were between 75 and 80% of the theoretical densities. The bend strengths are between 15 and 33 MPa.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.114-114
• /
• 2012

Metal-oxide-semiconductor field-effect transistors (MOSFETs)의 critical dimension (CD)가 sub 45 nm로 줄어듬에 따라 기존에 gate dielectric으로 사용하고 있는 SiO2에서 발생되는 high gate leakage current 때문에 새로운 high dielectric constant (k) 물질들이 연구되기 시작하였다. 여러 가지 high-k 물질 중에서, aluminum-oxide (Al2O3)는 높은 dielectric constant (~10)와 전자 터널링 barrier height (~2eV) 등을 가지기 때문에 많은 연구가 되고 있다. 그러나 Al2O3를 anisotropic한 patterning을 하기 위해 주로 사용되고 있는 halogen-based 플라즈마 식각 과정에서 나타나는 Al2O3와 하부 layer간의 낮은 식각 selectivity 뿐만 아니라 표면에 발생되는 defect, stoichiometry modification, roughness 변화 등의 많은 문제점들로 인하여 device performance가 감소하기 때문에 이를 해결하기 위한 많은 연구들이 진행중이다. 따라서 본 연구에서는 실리콘 기판위의 atomic layer deposition (ALD)로 증착된 Al2O3를 BCl3/Ar 중성빔을 이용하여 원자층 식각한 후 식각 특성을 분석해 보았다. Al2O3 표면을 BCl3로 absorption시킨 후 Ar 중성빔으로 desorption 시키는 과정에서 volatile한 aluminum-chlorides와 boron oxychloride가 형성되어 layer by layer로 제거됨을 관찰 할 수 있었다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2009년 추계학술발표대회
• /
• pp.197-201
• /
• 2009

A lot of work is carried out concerning to acicular ferrite formation in the weld metal of high strength and low-alloy steel. Those results are suggesting that oxides that contain titanium elements provides nucleation site of intragranular ferrite, referred as acicular ferrite. Thus, when intragranular ferrite is expected to form in heat-affected zone, oxide containing titanium element should be formed in the steel. However, normal steel is deoxidized by using aluminum element (Al-killed steel) with little oxygen content. It means almost oxygen is deoxidized with aluminum elements. In the present work, in order to form the acicular ferrite in the heat affected zone, with the same concept in the case of weld metal, the steel deoxidized with titanium element (titanium killed-steel) is prepared and the acicular ferrite formation is observed in detail by using laser-conforcal microscopy technique. The confocal technique makes it possible that the morphological change along the phase transformation from austenite to ferrite is in-situ tracked. Thus, the inclusion that stimulated the ferrite nucleation could be directly selected from the observed images, in the HAZ of the Ti-killed steel. The chemical composition of the selected inclusion is analyzed and the nucleation potential is discussed by changing the nucleation site with boron element. The potency for the ferrite nucleation is summarized and the existence of effective and ineffective manganese sulfide for nucleation is made clear.

• Journal of Welding and Joining
• /
• 제34권1호
• /
• pp.21-25
• /
• 2016

The automotive vehicle is made through the following processes such as press shop, welding shop, paint shop, and general assembly. Among them, the most important process to determine the quality of the car body is the welding process. Generally, more than 400 pressed panels are welded to make BIW (Body In White) by using the RSW (Resistance Spot Welding) and GMAW (Gas Metal Arc Welding). Recently, as the needs of light-weight material due to the $CO_2$ emission issue and fuel efficiency, new joining technologies for aluminum, CFRP (Carbon Fiber Reinforced Plastic) and etc. are needed. Aluminum parts are assembled by the spot welding, clinching, and SPR (Self Piercing Rivet) and friction stir welding process. Structural adhesive boning is another main joining method for light-weight materials. For example, one piece aluminum shock absorber housing part is made by die casting process and is assembled with conventional steel part by SPR and adhesive bond. Another way to reduce the amount of the car body weight is to use AHSS (Advanced High Strength Steel) panel including hot stamping boron alloyed steel. As the new materials are introduced to car body joining, productivity and quality have become more critical. Productivity improvement technology and adaptive welding control are essential technology for the future manufacturing environment.

• Bulletin of the Korean Chemical Society
• /
• 제32권6호
• /
• pp.1808-1846
• /
• 2011

From 1975 to 2011, for thirty six years, the author and his collaborators have developed a variety of reducing and hydroborating agents, and applied them to organic synthesis, which involves the 1,2-reduction of ${\alpha}$,${\beta}$-unsaturated carbonyl compounds, stereoselective reduction of cycloalkanones, regioselective ring-opening of epoxides, partial reduction of carboxylic acid derivatives to aldehydes, regioselective addition to carbon-carbon multiple bonds, etc. by utilizing metal hydrides and the newly-devised the Meerwein-Ponndorf-Verley (MPV) type reagents. Such developments provide a new synthetic methodology making possible valuable selective reductions and hydroborations, not practical previously.

• 소음진동
• /
• 제7권3호
• /
• pp.449-455
• /
• 1997

A theoretical study is presented for the prediction of the scattering of obliquely incident plane acoustic wave by transversely isotropic cylindrical shells immersed in water. In dorder to illustrate the vailidity of the theory backscattering form functions are compared with the existing results for degenerated problems: the catterings by isotropic shell and transversely isotropic solid cylinder. The unidirectional fiber reinforced boron-aluminum composites are selected as a model of transversely isotropic materials having potential applications in practice. From the resonant scattering analysis of the partial backscattering form functions, the dispersion curves for fluid-borne Stoneley wave, guided wave along the shell, and the lowest three Lamb type waves can be found. The Lamb type dispersions are compared with those of the flat plate. The variation of anisotropy significantly affects the properties of circumferential waves. From these results, it can be possible to identify parametrically the material properties of anisotropic cylindrical targets.

• 한국입자에어로졸학회지
• /
• 제9권3호
• /
• pp.173-185
• /
• 2013

Oxidations of metal generate large quantity of thermal and light energies but no toxic pollutants, so that metals with high calorific values, such as beryllium, boron, aluminum, magnesium, and lithium, are possible to be used as clean fuels instead of fossil fuels. However, they are so explosive due to very high oxidation rates that they should be stabilized by their surface passivation with oxides, organics and inorganics. For reasonable use of energetic metal particles as solid fuel, therefore, some detail information, such as thermal properties, preparation and passivation methods, and application area, of the energetic metals is introduced in this manuscript.