• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.4
• /
• pp.766-772
• /
• 2007

H.264/AVC is a new international standard for the compression of video images, in which a deblocking filter has been adopted to remove blocking artifacts. This paper proposes an efficient architecture of deblocking filter in H.264/AVC. By making good use of data dependence between neighboring $4{\times}4$ blocks, the memory size is reduced and the throughput of the deblocking filter processing is increased. Compared to the conventional deblocking filters, the proposed architecture enhances the performance of deblocking filter processing from 1.75 to 4.23 times. Hence the proposed architecture is able to perform real-time deblocking of high-resolution($2048{\times}1024$) video applications.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.12C no.4
• /
• pp.220-224
• /
• 2002

The electromagnetic properties and thermal behavior of Mn-Zn ferrite cores for the blocking filter of PLC application were investigated as the function of additives. The highest density and permeability were 4.98 g/㎤ and 8,221, respectively and were obtained to the specimen with composition of MnO 24 mol%, ZnO 25 mol% and Fe$_2$O$_3$51 mol%, added MoO$_3$ of 400 ppm, SiO$_2$ of 100 ppm, and CaO of 200 ppm. The uniform grains were organized, and the microstructures were compacted due to reduction of pores in the specimen. The permeability was increased up to 13,904 as the temperature of specimen increased to 110。C. However, it was decreased precipitously under 100 over 110。C. The exothermic behavior was observed in the frequency range from 1 kHz to 1 MHz, and the maximum temperature of specimen was 102。C at 1 MHz. In the consequence, the Mn-Zn ferrite core developed in this research will maintain the stable electromagnetic properties since the temperature of ferrite core rose to 93 。C in the range of 100 kHz to 450 kHz bandwidth qualified for PLC. The blocking filters were designed for single phase and three phases using the in-line and non-contact core. The best attenuation ratios of -46.46 dB and -73.9 dB were measured in the range of 100 kHz to 450 kHz bandwidth, respectively.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.33 no.2
• /
• pp.151-154
• /
• 2020

Radiation noise due to EMI noise generated by the driving circuits of LED lighting devices in a medical imaging room was reduced by decreasing the noise source in the driving circuits and changing the number of corrections in EMI filters. Noise attenuation and filter changes enabled driving circuits that reduced the electromagnetic waves. Such circuits were efficiently designed by using capacitors and inverters in a given space. Therefore, the malfunction of radiation devices can be minimized by using EMI-reduction filter circuits, and reliable operation of medical devices can be expected by blocking electromagnetic waves.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.7
• /
• pp.52-60
• /
• 2008

The deblocking filter in the H.264/AVC video coding standard helps to reduce the blocking artifacts produced in the decoding process. But it consumes one third of the computational complexity in H.624/AVC decoder, which advocates an efficient design of a hardware accelerator for filtering. This paper proposes an architecture of deblocking filter using two filters and some registers for data reuse. Our architecture improves the throughput and minimize the number of external memory access by increasing data reuse. After initialization, two filters are able to perform filtering operation simultaneously. It takes only 96 clocks to complete filtering for one macroblock. We design and synthesis our architecture using Dongbuanam $0.18{\mu}m$ standard cell library and the maximum clock frequency is 200MHz.

• Publications of The Korean Astronomical Society
• /
• v.20 no.1 s.24
• /
• pp.151-161
• /
• 2005

The reimaging optics of the KASINICS (KASI Near Infrared Camera System) includes many transparent components like an entrance window, band-pass filters, and blocking filters. As observational targets or in-field background objects, bright stars may cause optical ghosts that can significantly degrade the system performance of the KASINICS. We estimated analytically the relative brightness of ghost components with respect to a point source and examined the effects of tilting optical components as a method of suppressing ghosts. We also performed numerical ray tracings including all the optical components and found the results are consistent with those of the analytic estimations. We conclude that the KASINICS will not suffer from significant ghost effects with appropriate anti-reflection coatings and fittings for the optical components.

• Korean Chemical Engineering Research
• /
• v.61 no.3
• /
• pp.401-406
• /
• 2023

With the development of industry, fine dust is causing difficulties in various fields such as environment, health, and life, and a large amount of pollutants generated from human social activities are emerging as a serious environmental problem due to air pollution. Therefore, in this study, activated carbon was added to remove fine dust and volatile organic compounds by spinning cellulose acetate polymer fibers on a silicon support using the electrospinning method. By varying the activated carbon ratio and electrospinning time, the fine dust blocking effect and toluene adsorption performance were confirmed according to the activated carbon ratio and filter thickness. As a result, it was shown that the particles were effectively blocked with the increase in the electrospinning time due to the filter thickness increase. Adsorbed amount of toluene was increased with increase in activated carbon amount. Light transmittance was decrease with increase in electrospinning time, showing that there were light transmittance in filters electrospun for 20~30 minutes.

• Journal of IKEEE
• /
• v.27 no.1
• /
• pp.71-77
• /
• 2023

In this paper, a dual-band stopband frequency selective surface that can be applied to Wi-Fi 6E systems is designed to block external interfering signals with adjacent operating frequency spectrum in indoor wireless LAN environments. The proposed frequency selective surface structure has frequency blocking characteristics in the 2.4GHz and 6GHz bands, and is realized through a modified crossed dipole structure and an interlocking puzzle form between unit structures. The proposed structure is designed to have stable frequency response characteristics with respect to incident angle and polarization, and the experimental results show good agreement with the simulation results for incident waves from 0° to 45°.

• Membrane Journal
• /
• v.33 no.4
• /
• pp.191-200
• /
• 2023

Polyethersulfone (PES) is a widely employed membrane material for water and industrial purification applications owing to its hydrophilicity and ease of phase separation. However, PES membranes and filters prepared using the nonsolvent induced phase separation method often encounter significant flux decline due to pore clogging and cake layer formation on the dense membrane surfaces. Our investigation revealed that tight microfiltration or loose ultrafiltration membranes can be subject to physical fouling due to the formation of a dense skin layer on the bottom side caused by water intrusion to the gap between the shrank membrane and the substrate. To investigate the effect of the bottom surface porosity on membrane fouling, two membranes with the same selective layers but different sub-layer structures were prepared using single and double layer casting methods, respectively. The double layered PES membrane with highly porous bottom surface showed high flux and physical fouling tolerance compared to the pristine single layer membrane. This study highlights the importance of physical optimization of the membrane structure to prevent membrane fouling.

• Journal of Digital Convergence
• /
• v.18 no.3
• /
• pp.305-310
• /
• 2020

Lately the increase of unemployment and freeters, the use of mobile applications for part-time jobs has been increasing. This study identifies the problems of mobile job applications and focuses on domestic applications: 'Albamon' and 'Albachunkuk'. By conducting surveys and in-depth interviews based on Peter Morville's Honeycomb model. The usability assessment, the proposed improvement results are as follows: First, unhealthy establishments and overlapping job blocking filters should be further strengthened. Second, a design to tailor to the 20s age group, who are the main user of the application, is needed. Third, a fully customized part-time job listing is needed for users on the application landing page. Fourth, the application requires verification procedures for the document preparation regarding work contracts and reporting of employers. This study hopes to add to the improvement of job-seeking application services in Korea.

• Korean Journal of Optics and Photonics
• /
• v.35 no.1
• /
• pp.24-29
• /
• 2024

We propose a hyperbolic metastructure based on a nanopatterned metal (Ag)-dielectric (PDMS) multilayer and report on its performance in an infrared (IR) cut-off filter for imaging devices. By optimizing the size of the square-shaped Ag nanopattern and the thickness of PDMS surrounding the Ag nanopattern, the proposed IR cut-off filter blocks 99% of light in the 0.70-1.01 ㎛ wavelength band while maintaining a high transmittance of over 94% in the visible region. Here, the cut-off wavelength band starts at a region above the epsilon-near-zero wavelength of the hyperbolic metastructure and ends at the point where plasmonic absorption appears strongly. It is observed that transmittance in the wavelength region longer than the IR cut-off band increases again due to plasmonic coupling among horizontally adjacent Ag nanopatterns. This metastructure can improve the performance of IR-blocking filters as well as allow it to be manufactured ultra-thin, which is applicable to various planar optical elements and integrated optical components.