• ETRI Journal
• /
• v.32 no.2
• /
• pp.336-338
• /
• 2010

A macroblock-level deblocking method is proposed for H.264/AVC, in which blocking artifacts are effectively eliminated in the discrete cosine transform domain at the macroblock encoding stage. Experimental results show that the proposed algorithm outperforms conventional H.264 in terms of coding efficiency, and the bitrate saving is up to 5.7% without reconstruction quality loss.

• Journal of IKEEE
• /
• v.9 no.2 s.17
• /
• pp.108-114
• /
• 2005

While E-mail has become an important way of communications in IT societies, it creates various social problems due to increase of spam mails. Even though many organizations and corperations have been doing researches to develop spam mail blocking technologies, more cost and system complexities are required because of varieties of blocking technologies. In case of adopting spam blocking technologies, system reliability largely relies on the False-positive error rate with the order of employing spam blocking filters. In this paper, a False-positive mail recovery technique based on privacy information is proposed and implemented in order to improve the reliability of spam locking filters. Through the implemented prototype, recovery procedure for False-positive mails is verified and the results are summarized and analyzed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.7
• /
• pp.1687-1693
• /
• 2013

This paper addresses an adaptive postprocessing technique to remove blocking effects of the highly compressed images. The proposed technique removes blocking effects selectively by applying filters with different strength according to block analysis based on the directional activity. One-dimensional filters which are used to remove grid noises accomplish the adaptive filtering to the signal itself as well as to the directionality of the block. Moreover, we propose a detection method of the staircase noises and corner outliers and a two-dimensional directional filter to remove them. Experimental results for various images and bitrates show that the proposed method outperforms the conventional methods in PSNR for the objective performance and GBIM for the subjective quality evaluation.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.7
• /
• pp.3245-3271
• /
• 2016

To obtain well-dehazed images at the receiver while sustaining low bit rates in the transmission pipeline, this paper investigates the effects of image dehazing methods using dehazing contrast-enhancement filters on image compression for surveillance systems. At first, this paper proposes a novel image dehazing method by using a new method of calculating the transmission function—namely, the direct denoising method. Next, we deduce the dehazing effects of the direct denoising method and image dehazing method based on dark channel prior (DCP) on image compression in terms of ringing artifacts and blocking artifacts. It can be concluded that the direct denoising method performs better than the DCP method for decompressed (reconstructed) images. We also improve the direct denoising method to obtain more desirable dehazed images with higher contrast, using the saliency map as the guidance image to modify the transmission function. Finally, we adjust the parameters of dehazing contrast-enhancement filters to obtain a corresponding composite peak signal-to-noise ratio (CPSNR) and blind image quality assessment (BIQA) of the decompressed images. Experimental results show that different filters have different effects on image compression. Moreover, our proposed dehazing method can strike a balance between image dehazing and image compression.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.2
• /
• pp.11-19
• /
• 2010

Most of deblocking filters assumes that the block boundaries are accurately known and the coding information like quantization parameters are available. In some applications such as commercial television, however, many external video inputs without known block boundary and coding information arc given. If a decompressed video sequence heavily degraded with blocking artifacts is given through the external video port, it is absolutely necessary to detect block boundaries and control the strength of deblocking filtering by analysing the given images. This paper presents an efficient method to find the block boundaries and estimate the strength of the blocking artifacts without the knowledge of coding information. In addition, the confidence of the estimated blocking artifact information is also evaluated to control the adaptive deblocking filter robustly. Experiment results show that the estimated block boundary locations and strength relative strength and confidence information are practically good enough to reduce the blocking artifacts without prior knowledge.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.6
• /
• pp.490-495
• /
• 2003

The electromagnetic properties and thermal behavior of Mn-Zn ferrite cores for the blocking filter of Power Line Communication(PLC) application were investigated as a function of additives. The highest density and permeability were 4.98 g/$\textrm{cm}^2$ and 8,221, respectively and were obtained to the specimen with composition of MnO 24 mol%, ZnO 25 mol% and Fe$_2$O$_3$ mol%, added MoO$_3$ of 400 ppm, SiO$_2$ of 100 ppm, and CaO of 200 ppm. The uniform grains were organized, and the microstructures were densified due to reduction of pores in the specimen. The permeability was increased up to 13,904 as the temperature of specimen increased to 110$^{\circ}C$. However, it was decreased precipitously under 100 over 110$^{\circ}C$. The exothermic behavior was observed in the frequency range from 1 kHz to 1 MHz, and the maximum temperature of specimen was 102$^{\circ}C$ at 1 MHz. In the consequence, the Mn-Zn ferrite core developed in this research will maintain the stable electromagnetic properties since the temperature of ferrite core rose to 93$^{\circ}C$ in the range of 100 kHz to 450 kHz bandwidth qualified for PLC. The blocking filters were designed for single phase and three phases using the in-line and non-contact core. The best attenuation ratios of -46.46 dB and -73.9 dB were measured in the range of 100 kHz to 450 kHz bandwidth, respectively.

• The Journal of Korean Society for Radiation Therapy
• /
• v.8 no.1
• /
• pp.41-54
• /
• 1996

The secondary electrons developed by interaction between primary beam and a tray mounted for blocks in Megavoltage irradiation result in excess soft radiation dose to the surface layer. To reduce this electron contamination, electron filters have been used to be attached under a tray. Various filters with Cu and Al plates in six different thickness and Cu/Al combined plates in 3 different thickness were tested to measure the reduction rate of secondary electron contamination to the surface layer. The measurement to find optimal filter was performed on 6MV linear accelerator in $10 cm{\times}10 cm$ field size and fixed 78.5cm source to measurement points distance from surface to maximum build up point in 2mm intervals. The result was analyzed as the ratio of measured doses with using filters, to standard doses of measured open beam. The result of this study was fellowing : 1. The contaminated low energy radiation were mainly produced by blocking tray. 2. The surface absorbed dose was slowly increased by increasing irradiation field size but rapidly increased at field size above $15cm{\times}15cm$. 3. Al plate upto 2.5mm thickness used as a filter was found to be inadequate due to the failure of reduction of the surface absorbed dose below doses of the under surface upto the maximal build up. Cu 0.5mm plate and Cu 0.28mm/A1 1.5mm compound plate were found to be optimal filters. 4. By using these 2 filters, the absorbed dose to the surface were effectively reduced $5.5\%$ in field size $4cm{\times}4cm,\;11.3\%$ in field size $10cm{\times}10cm,\;22.3\%$ in field size $25cm{\times}25cm$. 5. In field size $10cm{\times}10cm$, the absorbed dose to the surface of irradiation was reduced by setting TSD 20cm at least,. but effective and enough dose reduction could be achieved by setting TSD 30cm as 2 optimal filters used. 6. More surface dose absorbed at TSD less than 7.4cm with a tray and filters together indicated that soft radiation was also developed by filters. 7. The variation of PDD by the different size of irradiation field was minimal as 2 optimal filters used. There was also not different in variation of PDD according to using any of two different filters. 8. PDD was not effected either by various TSD or by using the different filter among two.

• Elastomers and Composites
• /
• v.49 no.1
• /
• pp.1-12
• /
• 2014

Blocking of fuel filter in aircraft greatly can affect loss of pilot's life and of the aircraft. The investigation of failures is, thus, of vital importance in preventing incidents in advance. The fuel filter of aircraft plays an important role in filtering various debris from jet fuel. It filters impurities smaller than 10 ${\mu}m$ particles from jet fuel provided with the speed of 1,330 pounds per hour. It must be replaced per 500 h on the basis of operating time. However, even before reaching 500 h, the warning sign lighted on due to blocking of fuel filter. Recently, these similar defects have happened repeatedly. Therefore, in this study, the cause of blocking fuel filter in aircraft was investigated using various analytical techniques such as FT-IR microscopy, FE-SEM/EDS, and total sulfur determinator. Consequently, the blocking material of fuel filter was identified to an accelerator from the integral fuel tank sealant. And a mechanism for the formation of the blocking material of fuel filter by an accelerator blooming phenomenon in fuel tank was suggested.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.6A
• /
• pp.592-601
• /
• 2002

A postprocessing method for blocking artifact reduction in block coded images is presented. The proposed method consists of classification, adaptive inter-block filtering, and intra-block filtering. First, each block is classified as one of seven classes according to the characteristics of 8x8 DCT coefficients. Then each block boundary is faltered by adaptive inter-block filters, which use the block classes. Finally to the blocks which are classified as edge block classes, intra-block filtering is performed. Experimental tests produced that the proposed method gives better results than the convectional methods from both a subjective and an objective viewpoint.

• IEIE Transactions on Smart Processing and Computing
• /
• v.5 no.2
• /
• pp.129-142
• /
• 2016

In Wyner-Ziv coding, video signals are reconstructed by correcting side information generated by block-based motion estimation/compensation at the decoder. The correction is not always accurate due to the limited number of parity bits and early stopping of low-density parity check accumulate (LDPCA) decoding in distributed video coding, or due to the limited number of measurements in distributed compressive video sensing. The blocking artifacts caused by block-based processing are usually conspicuous in smooth areas and degrade the perceptual quality of the reconstructed video. Conventional deblocking filters try to remove the artifacts by treating both sides of the block boundary equally; however, coding errors generated by block-based processing are not necessarily the same on both sides of the block boundaries. Such a block-wise difference is exploited in this paper to improve deblocking for Wyner-Ziv frameworks by designing a filter where the deblocking strength at each block can be non-identical, depending on the reliability of the reconstructed pixels. Test results show that the proposed filter not only improves subjective quality by reducing the coding artifacts considerably, but also gains rate distortion performance.