• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.605-608
• /
• 1999

A conventional image coder, such as JPEG, requires not only DCT and quantization but also additional pre-filtering under noisy environment. Since the pre-filtering removes camera noise and improves coding efficiency dramatically, its efficient implementation has been an important issue. Based on well-known noise removal techniques in image processing fields, this paper introduces an efficient scheme by adapting a noise removal procedure to block-based image coders. By using two-dimensional DCT factorization, the proposed image coder has only a modified DCT and a VLC, and performs pre-filtering and quantization simultaneously in the modified DCT operation.

• Proceedings of the IEEK Conference
• /
• 2003.07e
• /
• pp.1787-1790
• /
• 2003

In this paper. we proposed a hardware(H/W) structure which can compress the video and embed the watermark in real time operation and implemented it into a FPGA platform using VHDL(VHSIC Hardware Description Language). All the image processing element to process both compression and reconstruction in a FPGA were considered each of them was mapped into H/W with the efficient structure for FPGA. The global operations of the designed H/W consists of the image compression with the watermarking and the reconstruction, and the watermarking operation is concurrently operated with the image compression. The implemented H/W used the 59％(12943) LAB(Logic Array Block) and 9％(28352) ESB(Embedded System Block) in the APEX20KC EP20K600CB652-7 FPGA chip of ALTERA, and stably operated in the 70㎒ clock frequency over. So we verified the real time operation, 60 fields/sec(30 frames/sec).

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.1
• /
• pp.46-55
• /
• 2004

Thermal characteristics of the various cooling methods in electronic equipment are studied numerically. A common chip cooling system is modeled as a parallel channel with protruding heat sources. A two-dimensional model has been developed for the numerical analysis of compressible. viscous. laminar flow. and conjugate heat transfer between parallel plates with uniform block heat sources. The finite volume method is used to solve this problem. The assembly consists of two channels formed by two covers and one printed circuit board that is assumed to have three uniform heat source blocks. Various cooling methods are considered to find out the efficient cooling method in a given geometry and heat sources. The velocity and the temperature fields. the local temperature distribution along the surface of blocks. and the maximum temperature in each block are obtained. The results are compared to examine the thermal characteristics of the different cooling methods both quantitatively and qualitatively.

• Journal of computational fluids engineering
• /
• v.21 no.2
• /
• pp.25-31
• /
• 2016

In this paper, a study on the development of OpenFOAM grid generation program for two-dimensional flow analysis is described. By using the pre-processor(eMEGA) of EDISON_CFD system, grids for OpenFOAM flow calculation were obtained. Resultant two-dimensional grids were used to calculate flow fields by applying simpleFoam, one of the OpenFOAM's popular solvers, and the obtained flow results were compared with theoretical and experimental data available. Also grids generated by present program were compared with grids by a commercial pre-processor Pointwise for the purpose of verification. Verification work includes three cases(single block, O-type single block, and multi block grid), and all results show reasonable matches. According to the current achievement, it can be concluded that OpenFOAM grid can be constructed conveniently by using eMEGA with GUI.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.5
• /
• pp.2311-2316
• /
• 2011

With development of information communications and network environments security importance to the informations deepen as time goes. In this viewpoint, cryptosystem is developing but proportionally cracking and hacking technology is developing. Therefore in this paper we proposed and designed block cryptosystem with byte variable operation. Designed cryptosystem based on byte operation is safe than existed cryptosystem because it is not generate the fixed DC and LC characteristics. Additionally, proposed cryptosystem have high processing rate and authenticated operation. Therefore proposed cryptosystem is considered to many aid in the network fields.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2007.06a
• /
• pp.185-190
• /
• 2007

In this study, we developed the 2.5D EM modeling and inversion algorithm for cross-hole source and receiver geometry. Considering the cross-hole environment, we use a VMD (vertical magnetic dipole) as a source and vertical magnetic fields as a measuring data. Developed inversion algorithm is tested for the isolated block model which has a conductive and a resistivity anomaly respectively. For the conductive anomaly, its size and resistivity are inverted well on the inversion results, while for the resistive anomaly, the location of anomalous block is shown on the inverted section, but its values are far from the exact value. Furthermore, artificial conductive anomalies are shown around the resistive anomalous zone. If we consider the inversion artifact shown in the test inversion of restive block, it is almost impossible to image the resistive zone. However, the main target of EM tomography in the engineering problem is conductive target such as fault zone, and contaminated zone etc., EM tomography algorithm can be used for detecting the anomalous zone.

• Journal of the Society of Naval Architects of Korea
• /
• v.46 no.3
• /
• pp.303-312
• /
• 2009

Recently, requests for the accurate process planning using modeling and simulation technique are increasing in many engineering fields including shipbuilding industry. In this study, Combined DEVS(Discrete EVent System specification) and DTSS(Discrete Time System Specification) simulation kernel is developed, and an integration strategy of dynamics simulation module and graphics module is also implemented. To evaluate the efficiency and applicability of the simulation kernel and integration strategy, these are applied to the block erection simulation of offshore structures.

• Elastomers and Composites
• /
• v.45 no.4
• /
• pp.245-249
• /
• 2010

Much interest on the thermoplastic elastomers (TPEs) has recently been attracted in commercial fields as well as scientific and applied research. The TPEs have their own characteristic area especially in relation with block copolymers as well as many other polymeric materials, since they show interesting features displayed by the conventional vulcanized rubber, and at the same time, by the thermoplastics. In addition, they are characterized by a set of interesting properties inherent to block and graft copolymers, variety of blends and vulcanized materials. The importance of TPE as organic materials can be evaluated by the number of published reports (papers, patents, technical reports, etc). For the suitable introduction of the TPE, historic, scientific, technical and commercial considerations should be taken into account. This review article starts with a brief discussion on historical considerations, followed by a introduction of the main preparations and analytical techniques utilized in chemical, structural, and morphological studies. The properties, processing tools, the position among organic materials, and applications of TPEs are also briefly reviewed. Finally, the most probable trends of their future development are discussed in a short final remarks.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.4_2
• /
• pp.649-656
• /
• 2023

Recently, global warming has become severe, and regulation is established for carbon savings each field. its regulation is applied to various fields using IC engine such as automobile, ship, agricultural machine. Therefore engine block applied Common Rail Direct Injection(CRDI) technology, that carry out thermal-structure analysis to examine design. The thermal load about 900℃ by explosion was applied in cylinder. And pressure about 9 MPa(90 Bar) was applied to structure analysis. As a result, it was the highest at 185.99℃ at the top of cylinder. Static-structure analysis applied thermal load, that was shown maximum equivalent stress at 142.59 Mpa and Maximum principal stress 145.03 MPa, Minimum principal stress -149 MPa. When compare analysis results to material property, it design is safety structurally.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.12
• /
• pp.2724-2729
• /
• 2010

This paper presents a method of constructing the sequential digital systems over finite fields. We assign all elements in finite fields to digit codes using mathematical properties of finite fields. Also, we discuss the operational characteristics and properties of the building block T-gate which is used to implement the sequential digital systems over finite fields. Then, we implemented sequential digital systems without feed-back. The sequential digital systems without feed-back is constructed as following steps. First, we assign the states in state-transition diagram to state digit codes, then obtain the state function and predecessor table which is explaining the relationship between present states and previous states. Next, we obtained the next-state function from state function and predecessor table. Finally we realize the circuit using T-gate and decoder. The proposed method is more efficiency and systematic than previous method.