• 한국막학회:학술대회논문집
• /
• 한국막학회 1996년도 춘계 총회 및 학술발표회
• /
• pp.55-56
• /
• 1996

Heterophase polymer system has been attractive for a potential applicability to gas separation membrane material. It has been known that there is a trade-off between gas permeability and its selectivity in common polymers. Therefore, the heterophase polymer can be an alternative for a gas separation membrane material because its transport properties can be readily controlled by blending of two different polymers. The transport properties of immiscible polymer blends strongly depend upon the intrinsic transport properties of corresponding polymers. Another important factor to determine the transport properties is their morphology: volume fraction, size and shape of dispersed phase. Although the effect of the volume fraction of the dispersed phase on the transport properties has been widely investigated, the size and shape effects have been paid attention very much. In an immiscible polymer blend of two polymers, its morphology is primarily controlled by its volume fraction of dispersed phase. Therefore, the effect of the size of the dispersed phase can be hardly seen. Therefore, a block copolymer has been commonly employed to control their morphology when each block is miscible with one or the other phase. In this work, gas transport properties will be measured by varying the morphology of the heterophase polymer membrane. The transport properties will be interpreted in terms of their morphology. The effect of the volume fraction of the PI phase and, in particular, its size effect will be investigated experimentally and theoretically.

• 한국염색가공학회지
• /
• 제21권4호
• /
• pp.57-62
• /
• 2009

N-Halamines are compounds which have covalent bonding between nitrogen and halogen. N-Halamine materials possess strong antimicrobial properties against wide spectrum of bacteria. The aim of this study is to prepare N-halamine membranes using m-aramid and poly(vinyl alcohol) (PVA). Surface characteristics using scanning electron microscope (SEM), pore size distribution, liquid permeability and mean pore size were measured to confirm feasibility as membrane. The results indicated that increased PYA portion up to 15% in the m-aramid/PVA blend resulted in improved pore size distribution, liquid permeability as well as mean pore size. Furthermore, antibacterial efficacy of the membranes after chlorination was confirmed and the results showed that bacteria in water were inactivated.

• Macromolecular Research
• /
• 제10권4호
• /
• pp.209-214
• /
• 2002

Miscibility of polysulfone (PSf) with various hydrophilic copolymers was explored. Among these blends, PSf gives homogeneous mixtures with poly(1-vinylpyrrolidone-co-styrene) copolymers [P(VP-S)] when these copolymers contained VP from 68 to 88 wt%. Microporous membranes for the ultrafiltration process were prepared from PSf blends with P(VP-S) copolymers. The membranes prepared from the PSf/(VP-S) blends exhibited higher water flux than the membranes prepared from PSf irrespective of the VP content. The solute rejection examined with the membranes fabricated from the miscible blends was similar to that of PSf membrane. However, the solute rejection examined with the membranes fabricated from the immiscible blends was lower than that of PSf membranes.

• 멤브레인
• /
• 제6권4호
• /
• pp.242-249
• /
• 1996

물/에탄올 수용액에 대한 투과증발특성을 개선하기 위하여 키토산을 이용하여 키토산/폴리비닐알콜 블렌드, 인산화 키토산 복합막을 제조하였다. 키토산과 폴리비닐알콜은 조성을 변화시키면서 블렌드를 얻을 수 있었으며, 글루탈알데히드를 이용하여 가교 방법과 조건을 변화시켜서 가교된 키토산/폴리비닐알콜 복합막을 제조하였다. 가교 농도와 가교 시간이 증가할수록 선택도는 증가하였으며 투과유량은 감소하였다. 글루탈알데히드를 가교제로서 키토산용액에 직접 첨가한 경우가 표면만을 가교한 경우보다 우수한 투과증발 성능을 나타내었다. 또한 인산화반응을 통하여 반응시간에 따라서 인산화도가 조절된 인산화 키토산을 얻었으며 이를 이용하여 인산화키토산 복합막을 제조하였다. 반응시간이 증가할수록 인함량이 증가하였으며 더불어 인산기의 도입에 따른 친수성의 증가로 선택도의 증가가 나타났다.

• Bulletin of the Korean Chemical Society
• /
• 제24권1호
• /
• pp.37-44
• /
• 2003

We examined the effect of polyether-type nonionic surfactants (Brij 35, Triton X-100, Tween 20 and Tween 80) on the potentiometric properties of sodium-, potassium- and calcium-selective membranes which are prepared with widely used ionophores and four kinds of polymer matrices [poly(vinyl chloride) (PVC), polyurethane (PU), PVC/PU blend, and silicone rubber (SR)]. It was found that the PVC-based membranes, which provide the best performance among all other matrix-based membranes in the absence of nonionic surfactants, exhibited larger change in their potentiometric properties when nonionic surfactants are added to the sample solution. On the other hand, the sodium-selective SR-based membrane with calix[4]arene, potassium-selective PVC/PU- or SR-based membrane with valinomycin, and the calcium-selective SR-based membrane with ETH 1001 provide almost identical analytical performance in the presence and absence of Tween 20 or Tween 80 surfactants. The origin of nonionic surfactants effect was also investigated by interpreting the experimental results obtained with various matrices and ionophores. The results suggest that the nonionic surfactant extracted into the membrane phase unselectively form complexes with the primary and interfering ions, resulting in increased background potential and lower binding ability for the ionophore. Such effects should result in deteriorated detection limits, reduced response slopes and lower selectivity for the primary ions.

• 멤브레인
• /
• 제28권2호
• /
• pp.113-120
• /
• 2018

무분별한 이산화탄소 배출로 인한 지구온난화는 이상기후와 생태계 파괴 등을 초래함으로써 인간의 삶에 심각한 영향을 미치고 있다. 이러한 문제의 근본 원인인 이산화탄소 배출을 저감하는 방법으로 본 연구에서는 자가-가교 성질이 있는 P(GMA-g-PPG)-co-POEM) (SP) 공중합체와 상용 고분자인 polyvinylpyrrolidone (PVP)를 혼합하여 블렌드 고분자 분리막을 제조하는 방법을 제시하였다. PVP 함량에 따른 분리막의 이산화탄소/질소 투과 특성을 확인하였으며, PVP의 함량이 증가할수록 투과도는 감소하고 선택도는 증가하는 결과를 보였다. 특히 PVP 함량이 30 wt%인 경우, 투과도는 순수 SP 고분자의 $CO_2$ 투과도인 72.9 GPU에서 12.6 GPU로 감소하였으나, $CO_2/N_2$ 선택도는 28.1에서 50.4로 약 79% 증가하였다. 이는 SP 공중합체와 PVP 사이의 수소결합으로 인해 고분자 사슬이 더욱 조밀하게 배열되기 때문인 것으로 볼 수 있으며, 이를 FT-IR, TGA, XRD, SEM을 통해 분석하였다. 따라서, 본 연구에서는 SP/PVP 고분자 블렌드 내 PVP의 함량을 조절함으로써 분리막의 투과도 및 선택도를 손쉽게 조절할 수 있음을 확인하였다.

• 멤브레인
• /
• 제27권3호
• /
• pp.273-283
• /
• 2017

폴리술폰 고분자는 비대칭 정밀여과 멤브레인 제조에 가장 널리 사용되는 고분자 소재이다. 폴리술폰 멤브레인은 소수성 특성으로 인하여 공정상에서 빠른 막오염이 일어난다. 고분자 블렌딩은 폴리술폰 멤브레인의 수명을 향상시키는데 있어 가장 간단하고 효과적인 방법이다. sPES는 폴리술폰 블렌딩 방법을 통하여 소수성을 해결할 수 있는 유용한 친수성 고분자이다. 본 연구에서는 PSF/sPES/DMF/PVP/BE 고분자 용액을 물에 침지시켜 정밀여과 멤브레인을 제조하였다. 캐스팅 용액에 소량의 sPES 첨가함으로써 정밀여과 멤브레인 구조 변화를 볼 수 있었다. sPES의 첨가는 높은 비대칭성과 활성층의 성장, 그리고 평균 기공 크기의 감소를 가져왔다. 하지만 수투과량은 PSF/sPES/DMF/PVP/BE로 만든 멤브레인이 PSF/DMF/PVP/BE로 만든 멤브레인에 비해 더 큰 값을 보였다.

• 멤브레인
• /
• 제30권3호
• /
• pp.149-157
• /
• 2020

유기 양이온과 유기/무기 음이온을 포함하고 있는 이온성 액체는 저온 용융 염의 종류이며 이산화탄소 분리 기능에 대한 잠재력을 갖고 있다. 지구 온난화와 기후 변화의 문제점을 극복하기 위해 이온성 액체를 기반으로 한 막을 개발하여 연도가스에서 이산화탄소를 걸러내는 연구가 활발히 진행되고 있다. 본 리뷰에서는 홀로 설 수 있는 중합 이온성 액체(PIL), 이온성 액체와 이온성 액체 복합 막의 혼합의 기술이 논의될 것이다. 새로운 이온성 액체의 모노머 도입, 그리고 중합 이온성 액체 막과 복합 막의 미세구조변형은 막의 기계적 특성을 향상시켜 가스투과율과 선택도를 크게 향상 시키는데 시용되어 왔다. 이온성 액체 모너머의 양이온과 음이온의 다양한 변형은 막의 가스 분리성에 큰 영향이 있다.

• Membrane and Water Treatment
• /
• 제3권1호
• /
• pp.25-34
• /
• 2012

Carboxylated polysulfone (CPS), poly (1,4-phenylene ether ethersulfone) (PPEES), membranes were prepared and used for the separation of NaCl and $CaCl_2$, in efficient way with less energy consumption. In this work, nanofiltration and reverse osmosis membranes were employed to the salt rejection behavior of the different salt solutions. The influence of applied pressure (1-12 bar), on the membrane performance was assessed. In CM series of membranes, $CM_1$ showed maximum of 97% water uptake and 36% water swelling, whereas, $CM_4$ showed 75% water uptake and 28% water swelling. In RCM series, $RCM_1$ showed 85% water uptake and 32% water swelling whereas, in $RCM_4$ it was 68% for water uptake and 20% for water swelling. Conclusively reverse osmosis membranes gave better rejection whereas nanofiltration membrane showed enhanced flux. CM1 showed 58% of rejection with 12 L/($m^2$ h) flux and $RCM_1$ showed 55% of rejection with 15 L/($m^2$ h) flux for 0.1 wt.% NaCl solution. Whereas, in 0.1 wt.% $CaCl_2$ solution, membrane $CM_1$ showed 78% of rejection with 12 L/($m^2$ h) flux and $RCM_1$ showed 63% rejection with flux of 9 L/($m^2$ h).

• 대한수의학회지
• /
• 제46권4호
• /
• pp.305-313
• /
• 2006

The primary goal of the wound healing is rapid wound closure. Recent advances in cellular and molecular biology have greatly expanded our understanding of the biologic processes involved in wound repair and tissue regeneration. This study was conducted to develop a new sponge type of biomaterial to be used for either wound dressing or scaffold for tissue engineering. We designed to make a comparative study of the wound healing effect of silk fibroin/hyaluronic acid (SF/HA) blend sponge in full-thickness dermal injury model of rat. Two full-thickness excisions were made on the back of the experimental animals. The excised wound was covered with either the silk fibroin (SF), hyaluronic acid (HA) or SF/HA (7 : 3 or 5 : 5 ratio) blend sponge. On the postoperative days of 3, 7, 10 and 14, the wound area was calculated by image analysis software. Simultaneously, the tissues were stained with Hematoxylin-Eosin and Masson's trichrome methods to measure the area of regenerated epithelium and collagen deposition. In addition, we evaluated the degree of the epithelial cell proliferation using immunohistochemistry for proliferating cell nuclear antigen (PCNA). We found that the half healing time ($HT_{50}$) of SF/HA blend sponge treated groups were significantly decreased as compared with either those of SF or HA treatment group. Furthermore, SF/HA blend sponges significantly increased the size of epithelialization and collagen deposition as well as the number of PCNA positive cells on epidermal basement membrane as compared with those of control treatment. Especially, the 5 : 5 ratio group of SF/HA among all treatment groups was most effective on wound healing rate and histological studies. These results suggest that SF/HA blend sponges could accelerate the wound healing process through the increase of epithelialization, collagen deposition and basal cell proliferation in full thickness skin injury.