• 한국염색가공학회지
• /
• 제5권2호
• /
• pp.99-108
• /
• 1993

In one dyeing system of silk/synthetic blend fabrics (polyester, nylon, acetate) with acid dyes/disperse dyes, dyeability and desorptibility of disperse dyes on silk fabric and transfer from dyed silk fabrics to synthetic fabrics by color difference were examined. When silk dyed with C.I. Disperse Red 19 and C.I. Disperse Red 60 at 10$0^{\circ}C$ for 60 minutes, color difference of dyed silk were $\Delta$E=56.72, $\Delta$E=47.65 for blank silk, respectively. The desorption rate of the dyed silks were measured in boiling bath with and without dye-free synthetic fibers. The desorption rate of dyed silk was effected by affinity of synthetic fabrics contained. When silk dyed with Red 19 and Red 60 was reduced at 10$0^{\circ}C$ for 60 minutes, the decolouration rates of dyed silk were 75% and 40%, respecdtively.

• 한국염색가공학회지
• /
• 제3권3호
• /
• pp.6-14
• /
• 1991

To develop an one-bath process for weight-reduction and mercerization of polyester/cotton fabric, concentrated NaOH solution was padded and steam-treated at high temperature. Following results which can be used commercially are obtained. (1) Steaming temperature of 110-12$0^{\circ}C$ is most efficient. (2) Optimum concentration of NaOH solution is 15-20%. (3) Most favorable weight-reduction is 20% in the aspect of fabric handle, and under this treating condition, dye exhaustion onto the mercerized cotton fiber is also increased to 40% or more. From above results, we believe that the economical and concurrent weight-reduction and mercerzation of polyester/cotton fabric can be realized. Moreover, with continuous treatment by pad-steam procedure, it is expected that this is, also, advantageous for the improvement of fabric quality and productivity.

• 한국연초학회지
• /
• 제11권2호
• /
• pp.211-224
• /
• 1989

10. Three major factors, freeness, filler and blend ratio that exercised considerable influence on physical properties of cigarette papers were chosen for the sake of their optimization at this experiment. An optimization of those above factors in paper manufacturing was investigated using response surface analysis. Optimum beating degree for Kenaf, Flax and NBKP showed around 72。SR, 68。SR and 85 SR, respectively, in considering of five quality index such as porosity, tensile strength, stretch, whiteness and opacity. The best blending ration of reciprocal pulps treated under optimum beating degree were diversified and combination scope of the bast fiber (Kenaf, Flax) to the NBKP was range from 30% to 65% in case of the Kenaf, from 25 to 40% in Flax at the same receipe. The optimum range of calcium carbonate content revealed 25%~30% in Kenaf mixed NBKP and 24%~31% in Flax mixed NBKP.

• 한국연초학회지
• /
• 제15권1호
• /
• pp.98-105
• /
• 1993

The chemical components of tobacco stalk, stems of tobacco caltivations, were analyzed and reconstituted tobacco sheet were made from the stalk and tobacco hyproducts by rolled and paper reconstitute tobacco sheet making process. The results were summarized as follow 1. In the viewpoint of chemical components, nicotine, total nitrogen and ash content of stalk were lower than those of stems, but crude fiber was two times higher than stems. 2. Reconstituted tobacco sheet of tobacco stalk blended were improved fragility and specific gravity than those of control. 3. Smoke components delivery of cigarette made from reconstituted tobacco sheet of tobacco stalk blended were similar to control cigarette. 4. According to the result of ranking preference test for control and sample cigarette, were not recognized significant at 5 percent level. 5. According to the result of areas test for control and sample cigarette, were not recognized significant at 5 percent level. 6. Optimum stalk blend ratio of reconstituted tobacco sheet manufacturing was from about 20 to 40% to the rolled sheet, and was from about 5 to 10% to the paper making process tobacco sheet.

• Fibers and Polymers
• /
• 제5권4호
• /
• pp.270-274
• /
• 2004

Blends of poly(l-lactide) (PLA) and low density polyethylene (LDPE) were prepared by melt mixing in order to improve the brittleness of PLA. A reactive compatibilizer with glycidyl methacrylate (GMA), PE-GMA, was required as a compatibilizer due to the immiscibility between PLA and LDPE. It contributes to reduce the domain size of dispersed phase and enhance the tensile properties of PLA/LDPE blends, especially for PLA matrix blends. A reaction product between PLA and PE-GMA, which was formed during melt-mixing and considered to act as a reactive compatibilizer, was characterized using $ ^1H-NMR$ spectroscopy.

• 한국의류학회지
• /
• 제23권5호
• /
• pp.757-763
• /
• 1999

The burn-out technique is used to result in the velvet cloth being patterned in open and solid areas by carbonize the cellulose fiber. It is examined how to burn out the cellulose part of the velvet without damage of the other part. The print paste indalca solution is mixed with sodium hydrogensulfate and lycerine and then screen-printed on the back side of the velvet. The effects of process conditions such as concentration of sodium hydrogensulfate dry heat fixation temperature and time pull no. and glycerine contents on the properties of ground farics were investigated. The yellowness index and the breaking load of silk ground fabrics afected by the process conditions especially concentration of sodium hydrogensulfate dry heat fixation temperature.

• 폴리머
• /
• 제24권6호
• /
• pp.810-819
• /
• 2000

Poly(p-hydroxybenzoate) (PHB)/poly(ethylene terephthalate) (PET) 8/2 공중합 폴리에스터 액정고분자와 poly(ethylene 2,6-naphthalate) (PEN), PET를 용융방사하여 인장탄성률을 측정하고, 55$^{\circ}C$ ο-chlorophenol 에서 2시간 동안 모재인 PEN/PET부분을 용출시킨 후, 용출되지 않은 PHB 피브릴을 전자현미경으로 조사하였다. 모재고분자 속에 존재하는 피브릴이 단섬유일 때 적용하는 Halpin-Tsai식과 피브릴이 연속상일 경우 적용하는 혼합의 법칙을 사용하여 이론적인 탄성률을 계산하고, 측정된 탄성률과 비교하였다. 이론적 탄성률과 측정된 탄성률의 차이를 보정하기 위하여 무차원 점도비 상수 (K)를 정의하고, K를 적용하여 기존의 식을 변형하였다. 변형된 Halpin-Tsai식과 혼합의 법칙을 통해 계산된 이론적인 탄성률은 용융방사를 통해 제조된 복합재료의 탄성률 계산에 더 적합함을 확인하였다.

• 한국염색가공학회지
• /
• 제34권3호
• /
• pp.157-164
• /
• 2022

This study tried to analyze the heat resistance properties by blending epoxy and phenolic resin in a certain ratio, and to analyze the adhesive properties at the time of metal-polymer hetero-adhesion by applying Epoxy-phenolic resin between a silicon steel sheet and m-aramid sheet, the viscosity, adhesive peel strength, and adhesive cross section were measured using a rotational rheometer, a tensile tester(UTM), and a field emission scanning electron microscopy(FE-SEM). The thermal stability and heat resistance were confirmed by measuring the mass loss according to the temperature increase using Thermogravimetric analysis(TGA). After blending with epoxy and Phenolic resin(1:0.25 ratio) curing at 110℃ for 10 min, high adhesive strength was improved more than 40% compared to the adhesive strength using epoxy alone. When the space between the silicon steel sheet and m-aramid sheet, which is created during curing of the E-P blend, is cured with a slight weight, it is possible to control the empty space and improve adhesion.

• 공업화학
• /
• 제18권6호
• /
• pp.557-561
• /
• 2007

폴리프로필렌(polypropylene, PP)/옥수수전분(corn starch) 마스터뱃취(MB) 블렌드를 PP 함량을 40, 50, 60, 80 wt%로 변화시키며 실험실 규모의 Brabender mixer를 이용하여 $200^{\circ}C$에서 제조하였다. PP/전분MB 블렌드의 화학구조와 열적특성을 적외선분광기(FT-IR), 시차주사열용량분석기(DSC) 그리고 열중량분석기(TGA)를 이용하여 관찰하였다. PP/전분MB 블렌드의 화학구조는 수산기의 존재여부를 통해 확인하였다. 또한 용융온도 및 엔탈피에는 큰 변화가 나타나지 않음을 알 수 있었고, 블렌드의 분해온도는 전분MB 함량에 따라 감소하고 있음을 보여주었다. 블렌드의 다공성 변화는 주사전자현미경(SEM)을 이용하여 측정하였고, 전분MB의 함량이 증가함에 따라 표면에 다공성의 증가를 보여주었다. PP/전분MB 블렌드의 유변학적 특성은 $200^{\circ}C$에서 동적유변학측정기를 이용하여 측정하였다. 전분MB의 함량이 증가할수록 용융점도와 shear thinning이 증가하였고, 탄성특성이 증가함을 보여주었다. 열적특성, 다공성 형성여부와 유변학적특성을 비교 평가하여, 전분MB의 함량을 40 wt%로 선정하였다. PP60/전분MB40 블렌드를 이용하여 섬유를 제조하였고, 다공성과 인장특성을 평가하였다.

• Animal Bioscience
• /
• 제36권12호
• /
• pp.1831-1841
• /
• 2023

Objective: This study was realized to evaluate the effects of supplementation with blends of water and fat-soluble vitamins on animal performance and carcass traits of young Nellore bulls. Methods: Forty-three Nellore bulls, with an initial weight of 261±27.3 kg and a mean age of 8±1.0 months, were used. Five animals were slaughtered at the beginning of the experiment (reference group), to determine the initial empty body weight of the bulls that remained in the experiment. The remaining 38 bulls were fed ad libitum and distributed in a completely randomized design in a 2×2 factorial scheme, with or without supplementation of water-soluble (B-blend+ or B-blend-) and fat-soluble (ADE+ or ADE-) vitamin blends. Diets were isonitrogenous (120 g of crude protein/kg dry matter [DM] of total mixed ration) and consisted of a roughage:concentrate rate of 30:70 based on total DM of diet. The experiment lasted 170 days, with 30 days of adaptation and 140 days for data collection. At the beginning and end of the experimental period, the bulls were weighed to determine the average daily gain. To estimate the apparent digestibility of nutrients and microbial efficiency, spot collections of feces and urine were performed for five consecutive days. Results: DM, ashes, organic matter, crude protein, ethereal extract, neutral detergent fiber corrected for residual ash and residual nitrogenous, and N intake and apparent digestibility were not influenced by vitamin supplementation, but total digestible nutrients intake and non-fibrous carbohydrates digestibility were influenced by B complex vitamin supplementation. Nitrogen balance, microbial efficiency, and performance data were not influenced (p>0.05) by vitamin supplementation. Conclusion: Vitamin supplementation (a blend of water-soluble and fat-soluble vitamins or their combinations) does not influence the animal performance and carcass traits of young Nellore bulls.