• 한국식품영양과학회지
• /
• 제21권2호
• /
• pp.175-180
• /
• 1992

말쥐치 가공 중 폐기되고 있는 말쥐치 내장중의 지질을 보다 효율적으로 이용하기 위해 탈검, 탈산, 탈색 및 탈취 등 말쥐치 내장유의 정제조건에 대하여 검토하였다. 말쥐치 내장유 100$m\ell$에 대하여 4% 옥살산을 20$m\ell$ 첨가하고 이어서 6$0^{\circ}C$에서 15분간 교반하여 탈검한 다음 이것에 4M의 알칼리 용액을 계산량 보다 0.5% 과잉으로 첨가한 후 6$0^{\circ}C$에서 30분간 탈산 처리하는 것이 효과적이었다. 탈산처리한 말쥐치 내장유의 10%에 해당하는 산성 백토를 첨가하고 감압하에 6$0^{\circ}C$에서 20분간 탈색 처리한 후 압력을 4 torr 이하로 유지하면서 수증기 증류법으로 18$0^{\circ}C$ 에서 60분간 처리한 말쥐치 내장유가 물리, 화학적 성상이 가장 우수하였다.

• Korean Chemical Engineering Research
• /
• 제54권2호
• /
• pp.175-180
• /
• 2016

본 연구에서는 내 오존성을 향상시키기 위해 PFPE-diol을 도입하여 불소계 변성 폴리우레아를 합성하였다. 불소 함량에 따라 변성 폴리 우레아(PFDIA-10C, PFDIA-20C, PFDIA-30C)를 제조하였으며 각각의 폴리우레아는 불소를 10 wt%~30 wt% 포함하였다. 제조된 도막의 오존처리 전 후 질량변화를 조사하였고, 도막의 경도, 내마모성, 인장성능 그리고 신장율 등의 물성을 분석하였다. 또한 내 오존성 테스트(10 ppm, 336 h)후에 광학현미경을 통해 도막표면을 관찰한 결과 PFPE-diol의 함량이 20 wt% 이상 일 때 균열, 탈색 그리고 질량감소량에서 양호한 결과를 보여주어 도막의 내 오존성이 향상되었음을 알 수 있었다. FT-IR 분석을 통해 PFDIA 합성물의 O-H 피크가 불소 함량 증가함에 따라 감소하는 것을 확인하였다.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권7호
• /
• pp.690-695
• /
• 1996

We have systematically investigated the characterization of V$_{2}$O$_{5}$ thin films as a counter electrode for lithium based complementary electrochromic devices. The V$_{2}$O$_{5}$ thin films were prepared by thermal vacuum evaporation with varing the substrate temperature and film thickness. In electrochromic devices for smart windows, the WO$_{3}$ thin films with 400-800 nm thickness require to be capable of reversibly injection 10-15 mC/cm$^{2}$ of lithium, which is readily accomplished charge-balanced switching in a V$_{2}$O$_{5}$ thin films with 100-150nm thick. The V$_{2}$O$_{5}$ thin films produces considerably small changes in optical modulation properties in the visible and near infrared region(500-1100 nm) compared to the amorphous WO$_{3}$ thin films on 10-15 mC/cm$^{2}$ of lithium injection and the V$_{2}$O$_{5}$ thin films can therefore act as a counter electrode to WO$_{3}$ in a lithium based complementary clectrochromic devices. After 10$^{5}$ coloration/bleaching switching time, the degradation does not occurs and the devices exhibit a stable optical modulation in V$_{2}$O$_{5}$ thin films. It has shown that the injected lithium ion amounts in crystalline V$_{2}$O$_{5}$ thin films with the same thickness is large by 3-5 mC/cm$^{2}$ of lithium compared to the amorphous thin films in the same driving conditions. Therefore, to optimize the device performance, it is necessary to choose an appropriate film thickness and crystallinity of V$_{2}$O$_{5}$ for amorphous WO$_{3}$ film thickness as a working electrode.

• 센서학회지
• /
• 제8권5호
• /
• pp.388-393
• /
• 1999

회토류 원소인 Eu로 활성화한 $CaSO_4:Eu$ TLD를 제작하였으며, 트랩 매개변수 등의 물리적 특성을 조사하였다. 제작한 $CaSO_4:Eu$ TLD는 활성제 Eu의 농도를 0.5 moi%로 하고, $600^{\circ}C$에서 2시간 동안 열처리하였을 때 최대의 열형광 강도를 나타내었으며, glow 곡선은 2개의 glow peak로 구성되었다. 두 glow peak를 분리하여 초기 상승법, peak 형상법, 가온율법, 최소자승법에 의한 glow 곡선의 fitting 방법 등을 사용하여 glow 곡선을 분석하였다. 두 glow peak의 활성화에너지는 각각 1.00 eV, 1.09 eV이고, 진동수인자는 각각 $7.04{\times}10^{11}\;s^{-1}$과 $5.12{\times}10^{11}\;s^{-1}$였으며, 1.11과, 1.33의 발광차수를 갖는 것으로 평가되었다.

• Journal of Microbiology and Biotechnology
• /
• 제22권7호
• /
• pp.930-938
• /
• 2012

High levels of xylanase activity (143.98 IU/ml) produced by the newly isolated Paenibacillus campinasensis G1-1 were detected when it was cultivated in a synthetic medium. A thermostable xylanase, designated XynG1-1, from P. campinasensis G1-1 was purified to homogeneity by Octyl-Sepharose hydrophobic-interaction chromatography, Sephadex G75 gel-filter chromatography, and Q-Sepharose ion-exchange chromatography, consecutively. By multistep purification, the specific activity of XynG1-1 was up to 1,865.5 IU/mg with a 9.1-fold purification. The molecular mass of purified XynG1-1 was about 41.3 kDa as estimated by sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE). Sequence analysis revealed that XynG1-1 containing 377 amino acids encoded by 1,134 bp genomic sequences of P. campinasensis G1-1 shared 96% homology with XylX from Paenibacillus campinasensis BL11 and 77%~78% homology with xylanases from Bacillus sp. YA-335 and Bacillus sp. 41M-1, respectively. The activity of XynG1-1 was stimulated by $Ca^{2+}$, $Ba^{2+}$, DTT, and ${\beta}$-mercaptoethanol, but was inhibited by $Ni^{2+}$, $Fe^{2+}$, $Fe^{3+}$, $Zn^{2+}$, SDS, and EDTA. The purified XynG1-1 displayed a greater affinity for birchwood xylan, with an optimal temperature of $60^{\circ}C$ and an optimal pH of 7.5. The fact that XynG1-1 is cellulose-free, thermostable (stability at high temperature of $70^{\circ}C{\sim}80^{\circ}C$), and active over a wide pH range (pH 5.0~9.0) suggests that the enzyme is potentially valuable for various industrial applications, especially for pulp bleaching pretreatment.

• Restorative Dentistry and Endodontics
• /
• 제24권2호
• /
• pp.364-371
• /
• 1999

본 연구는 테트라싸이클린에 의해 변색된 백서 치아에 대한 3 종 표백제의 표백효과를 비교하고 표백제의 침투 깊이 (법랑질 두께)에 따른 표백효과의 차이를 판별하기 위해 시행되었다. 30 마리의 웅성 백서에 매일 2주 동안 테트라싸이클린 용액을 복강내 주입하였다. 디스크 형태의 32개 백서 치아 표본을 16 시간 동안 자외선으로 조사하여 변색을 야기시켰다. 대조군은 생리 식염수에 보관하였으며 실험군은 3종 표백제(Opalescence, Rembrandt, NiteWhite)에 하루 5회씩 2주간 노출시켰다. 치아 색상을 표백전, 표백 1일, 3일, 5일, 7일, 9일, 11일, 및 14일에 각기 기록하여 치아내 변색부와 정상 색상간의 색상차 (${\Delta}$E)를 판독하였다; 대조군 - 9.78, 9.17, 9.36, 9.65, 9.40, 9.99, 10.57, 11.36; Opalescence - 10.08, 7.63, 6.72, 6.04, 5.10, 4.87, 4.89, 4.27; Rembrandt -9.83, 11.27, 9.55, 8.36, 7.75, 6.94, 7.11, 7.04; NiteWhite - 10.44, 9.92, 7.58, 6.80, 5.45, 5.05, 4.73, 4.01. 표백된 모든 치아들의 색상이 밝아졌다. (p<.01) 테트라싸이클린이 주입된 56개 백서 치아를 3 일간 자외선에 조사한 다음, 3가지 유형의 표백제 침투깊이를 설정하였다. 설측 상아질과 순측 법랑질을 통한 침투 (DN), 순측 법랑질만을 통한 침투 (RE), 1.0 mm 두께의 사람 법랑질로 피개된 순측 법랑질을 통한 침투 (HE). 표본들을 Opalescence로 하루 5회씩 1주일 및 4 주간 표백한 후 횡단하여 치아 색상을 측정하였다. 표백되지 않은 치아들을 대조군으로 이용하였다. 치아내 변색부와 정상 색상간의 색상차 (${\Delta}$E)는 다음과 같았다. 대조군 - 11.67; 1주 DN 군 - 13.55; 1주 RE군 - 12.80; 1 주 HE군 - 12.07; 4주 DN군 - 7.48; 4주 RE군 - 7.50; 4주 HE군 - 11.69. 4주 DN군과 4주 RE군의 색상 변화가 가장 크게 나타났다.(p<.01)

• 펄프종이기술
• /
• 제33권3호
• /
• pp.75-83
• /
• 2001

The potential of oxygen delignification is a powerful tool to reduce detrimental environmental effects. This study was performed to investigate the effect of steam explosion treatment of chemically treated oak wood on oxygen-alkali pulping. Pulp yield during steam explosion treatment by ${Na_2}{O_3}$-NaOH impregnation was higher than the other impregnation chemicals. Also, NaOH extraction at room temperature after steam explosion treatment improved the kappa number from 140~116 to 90~64. Oxygen-alkali pulping of chemical steam explosion treated woods affected to pulp yields. ${Na_2}{O_3}$-NaOH impregnation was very effective to higher carbohydrate yields at same delignification level. Its carbohydrate yield seemed to be highly related to the effluent pH. Oxygen-alkali pulping after steam explosion treatment of ${Na_2}{O_3}$-NaOH impregnated wood was shown that carbohydrate yield was very high because its effluent pH was increase from natural to mild alkali. Even if oxygen bleaching limit the delignification to 50% in order to avoid unacceptable yield and viscosity losses, oxygen-alkali pulping after steam explosion by ${Na_2}{O_3}$-NaOH impregnation was possible to extend the delignification more than 80%. Considering high pulp yield with lower lignin content from steam explosion treated wood, it might be profitable to end the cook at a high kappa number instead of a low kappa number, and continuously apply the oxygen delignification, in order to better quality pulp.

• 펄프종이기술
• /
• 제45권6호
• /
• pp.17-23
• /
• 2013

The reduction of metal ion from the cotton linter for the preparation of NMMO (N-methylmorpholine N-oxide)-based dissolving pulp was investigated. The NMMO-based dissolving pulp was usually used for the manufacture of high quality fabrics, and need to have high alpha cellulose content and high brightness. NMMO, which is environmentally friendly, and reusable after recovering process, is very sensitive to the metal ions such as Cu, Fe, Mg, and Cr. Electron beam, sulfuric acid, acetic acid, and ozone treatment before bleaching were used and the concentration changes of the metal ions were compared to that of EDTA, a chelating agent. It was found that both acid treatments (sulfuric and acetic acid) were very effective and comparable to EDTA treatment at the same dosage in metal ion reduction, but electron beam and ozone treatment were not. The sulfuric acid treatment turned out to be effective in metal ion reduction, and most inexpensive.

• ALGAE
• /
• 제28권2호
• /
• pp.193-202
• /
• 2013

Nitrogen availability and cell density each affects growth and cellular astaxanthin content of Haematococcus pluvialis, but possible combined effects of these two factors on the content and productivity of astaxanthin, especially under outdoor culture conditions, is less understood. In this study, the effects of the initial biomass densities IBDs of 0.1, 0.5, 0.8, 1.5, 2.7, 3.5, and 5.0 g $L^{-1}$ DW and initial nitrogen concentrations of 0, 4.4, 8.8, and 17.6 mM nitrate on growth and cellular astaxanthin content of H. pluvialis Flotow K-0084 were investigated in outdoor glass column photobioreactors in a batch culture mode. A low IBD of 0.1 g $L^{-1}$ DW led to photo-bleaching of the culture within 1-2 days. When the IBD was 0.5 g $L^{-1}$ and above, the rate at which the increase in biomass density and the astaxanthin content on a per cell basis was higher at lower IBD. When the IBD was optimal (i.e., 0.8 g $L^{-1}$), the maximum astaxanthin content of 3.8% of DW was obtained in the absence of nitrogen, whereas the maximum astaxanthin productivity of 16.0 mg $L^{-1}\;d^{-1}$ was obtained in the same IBD culture containing 4.4 mM nitrogen. The strategies for achieving maximum Haematococcus biomass productivity and for maximum cellular astaxanthin content are discussed.

• 치위생과학회지
• /
• 제21권3호
• /
• pp.178-184
• /
• 2021

Background: As the importance of the esthetic function of teeth increases, the use of esthetic restoration materials and whitening treatment are increasing. The purpose of this study was to investigate the color change of esthetic restoration materials upon using staining and whitening toothpaste. Methods: Light curing (LC) packable composite resin, LC flowable resin, LC glass ionomer (GI), and self-curing GI specimens were colored in coffee or curry for three hours a day for seven days. After that, regular toothpaste, whitening toothpaste containing hydrogen peroxide, and whitening toothpaste containing activated charcoal were applied for three minutes three times a day for two weeks. Luminosity (L), chromaticity a (a), and chromaticity b (b) were measured using a spectrophotometer once a week. Results: In the coffee-colored group, the change in L^2*a^2*b² (E²) with time was significant (p=0.004), there was no difference for different toothpaste types (p=0.646), and there was significant difference (p<0.001) for different esthetic restorative materials. The change of E² in the curry-colored group was significant only for different esthetic restorative materials (p<0.001). In the coffee-colored group, the L, a, and b values of the light-curing GI showed greater change than other materials after staining and one week after whitening, turning dark, red, and yellow. In the curry-colored group, L did not differ for different materials and times, and a and b showed the greatest difference in light-curing GI after staining and one and two weeks after whitening. Conclusion: The use of whitening toothpaste for two weeks was not different from the use of general toothpaste in the removal of staining or whitening. Since light-curing GI is the most vulnerable to coloration, it is recommended that coloring by food chromogen should be explained in advance, before using light-curing GI for teeth restoration.