• Journal of The Korean Dental Society of Anesthesiology
• /
• 제9권2호
• /
• pp.108-115
• /
• 2009

Trauma to any nerve may lead to persistent paresthesia. Trauma to the nerve sheath can be produced by the needle. The patient frequently reports the sensation of an electric shock throughout the distribution of the nerve involved. It is difficult for the type of needle used in dental practice to actually sever a nerve trunk or even its fibers. Trauma to the nerve produced by contact with the needle is all that is needed to produce paresthesia. Hemorrhage into or around the neural sheath is another cause. Bleeding increases pressure on the nerve, leading to paresthesia. Injection of local anesthetic solutions contaminated by alcohol or sterilizing solution near a nerve produces irritation; the resulting edema increases pressure in the region of the nerve, leading to paresthesia. Persistent paresthesia can lead to injury to adjacent tissues. Biting or thermal or chemical insult can occur without a patient's awareness, until the process has progressed to a serious degree. Most paresthesias resolve in approximately 8 weeks without treatment. In most situations paresthesia is only minimal, with the patient retaining most sensory function to the affected area. In these cases there is only a very slight possibility of self injury. But, the patient complaints the discomfort symptoms of paresthesia, such as causalgia, neuralgiaform pain and anesthesia dolorosa. Most paresthesias involve the lingual nerve, with the inferior alveolar nerve a close second. This is the report of a case, that had the persistent paresthesia care on left lingual & buccal shelf regions after the lingual and long buccal nerve block anesthesia.

• Journal of Animal Science and Technology
• /
• 제63권4호
• /
• pp.790-798
• /
• 2021

The objective of this study was evaluation of pig behavior changes related to temperature, relative humidity, volatile organic compounds (VOCs), and illuminance. A total of 24 growing pigs ([Yorkshire × Landrace] × Duroc) were used in the experiment. A sensor was installed at a height of 0.5 m in the center of the pig house. In experiment 1, temperature was changed every four days to 18℃ (T1), 22℃ (T2), 26℃ (T3), and then 30℃ (T4). In experiment 2, relative humidity was adjusted to 45% (low humidity [LH]), 60% (middle humidity [MH]), and then 75% (high humidity [HH]) for four days. In experiment 3, after cleaning the pig house just before experiment, only minimal ventilation was provided. VOCs and pig behaviors were observed for 7 days without cleaning the pig house. In experiment 4, three light bulbs of 40 W (470 lumens / 45 lx; low illuminance [LI]), 75 W (1,055 lumens / 103 lx; middle illuminance [MI]), and 100 W (1,521 lumens / 146 lx; high illuminance [HI]) were used for four days each. Pig behavior analysis was performed for following criteria : Feed intake, Standing, Lying, Sitting, Drink water, Rooting, Posture transition (lying-standing), Posture transition (standing-lying), Wallowing, and Biting. In experiment 1, feed intake time was lower (p < 0.05) for the T3 than other treatment groups. Standing time was highest (p < 0.05) for the T1 and lowest (p < 0.05) for the T3. Lying time was shorter (p < 0.05) in T1 and T2 compared to T3 and T4. Drinking frequency was higher (p < 0.05) for the T4 than other treatment groups. In experiment 2, the frequency of rooting and wallowing increased (p < 0.05) with increasing humidity. LH showed the lowest (p < 0.05) rooting frequency and HH showed the highest (p < 0.05) rooting frequency. In experiment 3, VOCs concentration did not (p > 0.05) change pig behavior. In experiment 4, lying time was the longest (p < 0.05) at LI and shortest (p < 0.05) at HI. Therefore, pig behavior is heavily influenced by the environment, especially temperature and humidity. However, correlation between pig behavior to VOCs and illuminance seems to be needed more research.

• Korean Journal of Ecology and Environment
• /
• 제53권4호
• /
• pp.324-330
• /
• 2020

Ozone (O₃) is a general disinfectant to remove micro-pollutants in water treatment system. Previous studies have reported effect of ozone to bacteria and pathogens removal, but its effect to the relatively large organisms has little known. In this study, we investigated potential effects of ozone toxicity to the non-bite midge larvae (Glyptotendipes tokunagai) with accumulate mortality, coloration change and expression of heat shock protein 70 (HSP70). The accumulate mortality rate of G. tokunagai increased in a dose-time dependent manner and the highest mortality rate was observed to 75% at 30 minute of exposure duration with 2.0 ppm of ozone concentration. Exposure to ozone was a factor increasing body color of the larvae. The tendency of HSP70 mRNA expression showed up-regulation in ozone exposure at 20 minute. After that time, the expression of HSP70 in exposed group decreased to a similar level of control group. Our results clearly showed that ozone toxicity affects physical and molecular activity of G. tokunagai, implying the potential hazardous of ozone in the aquatic ecosystem including macroinvertebrates.

• Journal of Animal Science and Technology
• /
• 제64권3호
• /
• pp.564-573
• /
• 2022

In this study, considering the difficulties for all farms to convert farm styles to animal welfare-based housing, an experiment was performed to observe the changes in the behavior and welfare of sows when the slat floor was changed to a collective breeding ground. Twenty-eight sows used in this study were between the second and fifth parities to minimize the influence of parity. Using a flats floor cover, the flattening rates were treated as 0%, 20%, 30%, 40%, and 50%. Data collection was the behavior of sows visually observed using a camera (e.g., standing, lying, fighting and excessive biting behaviors, and abnormal behaviors) and the animal welfare level measured through field visits. Lying behavior was found to be higher (p < 0.01) as the flattening rate increased, and sows lying on the slatted cover also increased as the flattening rate increased (p < 0.01). Fighting behavior wasincreased when the flattening rate was increased to 20%, and chewing behavior was increased (p < 0.05) as the flattening rate increased. The animal welfare level of sows, 'good feeding', it was found that all treatment groups for body condition score and water were good at 100 (p < 0.05). 'Good housing' was the maximum value (100) in each treatment group. As the percentage of floor increased, the minimum good housing was increased from 78 in 0% flattening rate to 96 in 50% flattening rate. The maximum (100) 'good health' was achieved in the 0% and 20% flattening rates, and it was 98, 98, and 99 in the 30%, 50%, and 40% flattening rate, respectively. 'Appropriate behavior' score was significantly lower than that of other paremeters, but when the flattening ratio was 0% and 20%, the maximum and minimum values were 10. At 40% and 50%, the maximum values were 39 and 49, respectively, and the minimum values were analyzed as 19 for both 40% and 50%. These results will be used as basic data about sow welfare for farmers to successfully transition to group housing and flat floors.

• Journal of the Korean Orthopaedic Association
• /
• 제54권5호
• /
• pp.463-468
• /
• 2019

Congenital insensitivity to pain with anhidrosis (CIPA) is a rare disease that affects the sensory and autonomic nervous system. The patients do not have the ability to sense different sensations, such as pain, which tends to lead to different injuries. In addition, the patients suffer from fluctuations in body temperature due to autonomic involvement. The present case was a five-year-old girl with a neglected distal femur fracture. X-rays taken during the follow-up showed marked callus formation and pseudarthrosis of the distal femur. She had biting injuries of the tongue, auto-amputation of the fingers, some developmental delay and a history of recurrent fever with an unknown origin. The electrodiagnostic study was normal. The quantitative sudomotor axon reflex test revealed markedly reduced postganglionic sudomotor axonal responses at all sites recorded on the left. She was diagnosed with CIPA. As the initial presentation of CIPA involves the musculoskeletal system, orthopedic surgeons should have a high index of suspicion.

• Journal of Preventive Medicine and Public Health
• /
• 제32권3호
• /
• pp.421-426
• /
• 1999

Objectives: An outbreak of dermatosis occurred at a city gas manufacturing factory in Pohang in Aug, 1998. The authors conducted a study to find the cause and prevent the dermatosis, Methods: We conducted a questionnaire survey of 73 workers in the factory twice, once or Aug. 14th and then Sept. 11th, 1998. Also, a dermatologist examined their skin lesions. We suspected ants as the cause, so we collected them for identification. Results: Twelve cases of dermatosis were identified with an attack rate of 16.4%. The attack rates were not different by age, educational level or tenures. The attack rates were 66.6% among production workers, 2.0% among clerical workers, 16.7% among tank trailer drivers and 0% among guards. The attack rate among production workers was significantly higher than that of the others (<0.01). There were no histories of the same dermatosis for the past one year. Histories of other skin diseases and allergies were very rare in both cases with skin diseases and control. Multiple, pruritic, rice-grained to bean sized erythemafous macules or papules with a central biting point could be found after initial severe itching occurred, Three cases showed signs of dermatosis with an allergic nature. The onset of dermatosis was between July 30 and Aug 12 and the durations varied from 5 days to over a month. The most frequent sites of stir lesions were the chest and abdomen (60.6%), and they were also observed on the neck (33.3%), arms (33.3%), shoulders (16.7%) and back (16.7%). Over 10 ants with their wings were collected in the work place and identified as Pachycondyla chinensis, subfamily Ponerinae. Conclusions : We thought that the outbreak of dermatosis was brought about by the ants flying into the work place through the open windows. Further studies on the factors contributing to the prosperity of the ants in this area are needed.

• The Journal of Korean Academy of Prosthodontics
• /
• 제38권5호
• /
• pp.583-594
• /
• 2000

Dislodgement of a crown or extension bridge and the loosening of a retainer of a bridge is a serious clinical problem in fixed restoration. Generally these problems are considered to be associated with deformation of the restoration. During biting, the restoration is subjected to complex forces and deforms considerably within the limit of its elasticity. Deformation of the restoration under the occlusal force induces excessive stress in the cement film, which then leads to the cement fracture. Such a fracture may eventually cause loss of the restoration. Because most of the past retention tests for full veneer crown were done without fatigue loading, they were not exactly simulating intraoral environment. And the purpose of this study was to evaluate the effect of cyclic cantilever loading on the retentive strength of full veneer crowns depending on different type of cements and taper of prepared abutment. Steel dies with $8^{\circ}\;or\;16^{\circ}$ convergence angle were fabricated through milling and crowns with the same method. These dies and crowns were divided into 8 groups. Group 1 : $16^{\circ}$ taper die, cementation with zinc phosphate cement, without loading Group 2 : $16^{\circ}$ taper die, cementation with zinc phosphate cement, with loading Group 3 : $8^{\circ}$ taper die, cementation with zinc phosphate cement, without loading Group 4 : $8^{\circ}$ taper die, cementation with zinc phosphate cement, with loading Group 5 : $16^{\circ}$ taper die, cementation with Panavia 21, without loading Group 6 : $16^{\circ}$ taper die, cementation with Panavia 21, with loading Group 7 : $8^{\circ}$ taper die, cementation with Panavia 21 without loading Group 8 : $8^{\circ}$ taper die, cementation with Panavia 21, with loading After checking the fit of die and crown, the luting surface of dies and inner surface of crowns were air-abraded for 10 seconds. The crowns were cemented to the dies, with cements mixed according to the manufacturer's recommendations. A static load of 5kg was then applied for 10 minutes with static loading device. Twenty-four hours later, group 1, 3, 5, 7 were only thermocycled, group 2, 4, 6, 8 were subjected to cyclic loading after thermocycling. Retentive tests were performed on the Instron machine. From the finding of this study, the following conclusions were obtained 1. Panavia 21 showed significantly higher retentive strength than zinc phosphate cement for all groups (p<0.05). 2. There was a significant difference in the retentive strength between $8^{\circ}\;and\;16^{\circ}$ taper for zinc phosphate cement(p<0.05), but no significant difference for Panavia 21 (p>0.05). 3. Cyclic loading significantly decreased the retentive strength for all groups(p<0.05). 4. For zinc phosphate cement, there was 35% reduction of the retentive strength after loading in the $16^{\circ}$ taper die, 25% in the $8^{\circ}$ taper die, and for Panavia 21, 21% in the $16^{\circ}$ taper die, 18% in the $8^{\circ}$ taper die.

• Journal of Dental Rehabilitation and Applied Science
• /
• 제29권1호
• /
• pp.45-58
• /
• 2013

The purpose of this study was to analyze the area of occlusal contact points using visual method. One subject was selected who had Angle Class I, normal dentition, without dental caries, periodontal disease and temporomandibular disorders. Forty times PVS impressions were taken and 10 pairs casts were fabricated using dental super hard stone. After mounting the casts with customized loading apparatus, 78.9kg/f force was loaded as a maximum biting force. In T-Scan method, occlusal contact points measurement was repeated twice. Then, using Photoshop program (Adobe photoshop CS3, Adobe. San Jose, USA), the pixels which indicated occlusal contact points by color was recognized, and the distribution of recognized pixels were calculated to area. In Add picture method, polyether bite material applied to the occlusal surface of the casts. Then, the image of the translucent areas was recorded and classified $0{\sim}10{\mu}m$, $0{\sim}30{\mu}m$, $0{\sim}60{\mu}m$ area by the amount of transmitted light. To acquire occlusal surface, the numbers of pixels from the photograph of the contact area indicated cast converted to $mm^2$. The mean occlusal contact area by two methods was statistically analyzed (paired t-test). Part of the red and pink area in T-Scan image were almost equivalent to the $0{\sim}10{\mu}m$, $0{\sim}30{\mu}m$, $0{\sim}60{\mu}m$ area in Add picture image. The distribution of occlusal contact points were similar, but the average area of occlusal contact points was wider in T-scan image (P<.05). Pink and red area in T-scan image was wider than $0{\sim}10{\mu}m$, $0{\sim}30{\mu}m$ area in Add picture image (P<.05), but similar to $0{\sim}60{\mu}m$area in Add picture image (P>.05). Occlusal contact points in T-scan image did not indicate real occlusal contact points. Occlusal contact areas in T-scan method were enlarged results comparing with those in Add picture method.

• Korean Journal of Cognitive Science
• /
• 제23권1호
• /
• pp.109-132
• /
• 2012

According to recent embodied cognition approach, understanding of actions is not based on abstract symbolic process but based on mental simulation of sensory-motor information related to those actions. As supporting evidence, motor resonance effect is a facilitation/interference effect of motor response in terms of similarity between observed action and concurrent own action. In the current research, we investigated this effect in the situation to perceive a complex social action perception and how it would be modulated by perspectives of construals of the social action scene. For this purpose, we created three kinds of fighting action scenes of two people in terms of body actions of the subject(ie., hitting, stepping, biting), and described them in two perspectives; active and passive. During the experiment, subjects had to verify the congruency of the picture and the description first, and if they are congruent, they had to do two different actions in terms of color of following cues. In the first experiment, subjects' response time for stepping on a pedal and pressing a button were analyzed for measuring motor resonance effect for the foot movement. In the second experiment, voice response time with a microphone and button pressing time were analyzed for the mouth movement motor resonance effect. Results showed the facilitation of the foot movement(in Exp1), and the mouth movement(in Exp2) only when the action scene was described in active perspective. Our results indicate that the motor resonance effect can be occurred during perception of social actions in the real life situation, but it can be also modulated by the perspective of the mental construal of the action event.

• Journal of Yeungnam Medical Science
• /
• 제10권1호
• /
• pp.103-113
• /
• 1993

This study was conducted to explore the feasibility of using the lead level in the hair of children as a screening test for lead intoxication of children and as an indicator for environmental pollution. Lead concentration of hair was measured for 268 seven to nine-year-old elementary school children in Taegu city (147 children) and Gampo town(121 children). The lead level in hair was measured by atomic absorption spectrophotometer equipped with a graphite furnace atomizer. The following information was obtained for all children: sex, age, father's occupation and smoking habits, kinds of hair cleaner, fingernail biting habits, and status of the child's hands and clothing. The mean lead level in hair was $8.7{\pm}2.9{\mu}g/g$ in the urban area and $7.7{\pm}2.2{\mu}g/g$ in the rural area. There were significant differences between two groups(p<0.01). The difference of lead levels in hair measured by cleanliness of the child's hands(clean: $7.4{\pm}2.7{\mu}g/g$, dirty: $8.2{\pm}2.6{\mu}g/g$) and child's clothing(clean: $8.0{\pm}2.5{\mu}g/g$, dirty: $9.3{\pm}2.6{\mu}g/g$) were statistically significant, but other factors were not significant. In multiple regression analysis, difference of residency and age were significant variables for lead level in the hair of children. These findings suggest that measurement of lead level in the hair is a useful method for the screening of the lead intoxication of children and monitoring environmental conditions.