• Korean Journal of Veterinary Research
• /
• v.48 no.4
• /
• pp.385-391
• /
• 2008

This study was performed to examine the effect of 2,3',4,4',5-pentachlorobiphenyl (PCB#118) on testis of male rats. PCB#118 (20 mg/kg/week) in corn oil was intraperitoneally injected to adult male rats for 2, 5, 8 weeks. The body and testicular weights were measured at 3, 6, 9 weeks of PCB treatment. The morphological changes in the rat testes were then analyzed by light microscopy (LM) and transmission electron microscopy (TEM). The results showed that PCB#118 caused significant change in the body weights and testicular weights. Moreover, the morphological studies that were conducted on the PCB-treated rats revealed that the number of spermatocytes and spermatids in their seminiferous tubules decreased than control group (LM). The nuclear membrane was damaged when PCB was administered to them for 9 weeks (TEM). These results suggest that the reproductive function of the adult male rats is sensitive to PCB#118, and that may affect the testicular morphology of adult male rats.

• Textile Coloration and Finishing
• /
• v.8 no.2
• /
• pp.1-7
• /
• 1996

Thermotropic liquid-crystalline polyurethanes were synthesized by the polyaddition reaction of such para-substiuted diisocyanate monomer as 1,4-phenylene diisocyanate(1,4-PDI) and 2,5-tolylene diisocyanate(2,5-TDI), with 4,4'-bis($\omega$-hydroxyalkoxy)biphenyls(BPm: $HOC_{m}OC_{6}H_{4}C_{6}H_{4}OC_{m}H_{2m}OH$; m is the carbon number of the hydroxyalkoxy group). These polyurethanes have mesogenic biphenyl units in the main chain. Properties of polymers were studied by differential scanning calorimetry, wide-angle X-ray scattering, thermogravimetic analysis, polarizing microscopy, and infraed spectroscopy. DSC thermograms for these polymers exhibited two endothermic peaks corresponding to phase transitions of melting and isotropization. Mesomorphic behavior of the polyurethanes were also observed under the polarizing microscope. For example, polyurethane 2,5-YDI/BP5 with [$\theta$]=0.44 prepared from 2,5-TDI and BP5 exhibited a liquid crystalline phase from 194 to 205$^{\circ}C$. Infrared spectrum study indicated that the hydrogen bonding between urethane linkages affected the mesomorphism. The thermostabilities of polyurethanes 2,5-TDI/BP5 and 1,4-PDI/BP5 were measured at a heating rate of 1$0^{\circ}C$/min in air. The temperatures of 5% weight loss for 2,5-TDI/BP5 and 1,4-PDI/BP5 were 297 and 334$^{\circ}C$, respectively.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.11
• /
• pp.980-986
• /
• 2009

In a triple-layered structure of ITO/N,N'-diph enyl-N,N'bis(3-methylphenyl)-1,1' - biphenyl-4,4'-diamine(TPD)/tris(8-hydroxyquinoline)aluminum($Alq_3$)/(2,9-Dimethyl-4,7-diphenyl-1,10-phenanthroline(BCP)/Al device, we have studied the electrical and optical characteristics of organic light-emitting diodes(OLEDs) depending on the deposition condition of BCP layer. Several different sizes of holes on boat and several different deposition rates were employed in evaporating the organic materials. And then, electrical properties of the organic light-emitting diodes were measured and the performance of the devices was analyzed. It was found that the hole-size of crucible boat and the evaporation rate affect on the surface roughness of BCP layer as well as the performance of the device. When the hole-size of crucible boat and the deposition rate of BCP are 1.2 mm and $1.0\;{\AA}/s$, respectively, average surface roughness of BCP layer is lower and the efficiency of the device is higher than the ones made with other conditions. From the analysis of current density-luminance-voltage characteristics of a triple layered device, we divided the conductive mechanism by four region according to applied voltage. So we have obtained a coefficient of ${\beta}_{ST}$ in schottky region is $3.85{\times}10^{-24}$, a coefficient of ${\beta}_{PF}$ in Poole-Frenkel region is $7.35{\times}10^{-24}$, and a potential barrier of ${\phi}_{FN}$ in Fower-Nordheim region is 0.39 eV.

• Toxicological Research
• /
• v.22 no.3
• /
• pp.293-299
• /
• 2006

We demonstrate that magnolol, a hydroxylated biphenyl compound isolated from Magnolia officinalis, inhibits LPS-induced expression of iNOS gene in RAW 264.7 cells(murine macrophage cell line). Treatment of RAW 264.7 cells with magnolol inhibited LPS-stimulated nitric oxide production in a dose-related manner. RT-PCR analysis showed that the decrease of NO was due to the inhibition of iNOS gene expression. Western immunoblot analysis of phosphorylate p38 kinase showed magnolol significantly inhibited the phosphorylation of p38 kinase which is important in the regulation of iNOS gene expression. The specific p38 inhibiter SB203580 abrogated the LPS-induced NO generation and iNOS expression, whereas the selective MEK-1 inhibitor PD98059 did not affect the NO induction. Immunostaining of p65 and reporter gene assay showed that magnolol inhibited NF-${\kappa}/Rel$ nuclear translocation and transcriptional activation, respectively. Collectively, this series of experiments indicates that magnolol inhibits iNOS gene expression by blocking NF-k/Rel and p38 kinase signaling. Due to the critical role that NO release plays in mediating inflammatory responses, the inhibitory effects of magnolol or iNOS suggest that magnolol may represent a useful anti-inflammatory agent.

• Analytical Science and Technology
• /
• v.26 no.2
• /
• pp.113-119
• /
• 2013

The objective of this study was to understand the content characteristic of polybrominated biphenyl ethers in indoor household dust. Polybrominated diphenyl ethers (PBDEs) are widely used as additive brominated flame retardants (BFR) in electrical and electronic equipment, and insulation in the indoor environment, and may be released indoors via volatilization or as dusts. The indoor household dust samples were collected from January to December in 2011 and measured for the concentrations, congener profiles and possible sources of PBDEs. The concentrations of 22 congeners of PBDEs (the sum of PBDEs 47, 49, 66, 71, 77, 85, 99, 100, 119, 126, 138, 153, 154, 156, 183, 184, 191, 196, 197, 206, 207 and 209) were 35.22~575.88 ng/g for apartment dust samples and 524.44 ng/g for laboratory dust sample. The eight congeners of BDE-47, 153, 183, 196, 197, 206, 207, and 209 are detected in the more than 1 ng/g. The three congeners of BDE-206, 207 and 209 in all dust samples were detected.

• The Korean Journal of Physiology and Pharmacology
• /
• v.14 no.6
• /
• pp.353-358
• /
• 2010

This study demonstrates the ability of magnolol, a hydroxylated biphenyl compound isolated from Magnolia officinalis, to inhibit LPS-induced expression of iNOS gene and activation of NF-${\kappa}B$/Rel in RAW 264.7 cells. Immunohisto-chemical staining of iNOS and Western blot analysis showed magnolol to inhibit iNOS gene expression. Reporter gene assay and electrophoretic mobility shift assay showed that magnolol inhibited NF-${\kappa}B$/Rel transcriptional activation and DNA binding, respectively. Since p38 is important in the regulation of iNOS gene expression, we investigated the possibility that magnolol to target p38 for its anti-inflammatory effects. A molecular modeling study proposed a binding position for magnolol that targets the ATP binding site of p38 kinase (3GC7). Direct interaction of magnolol and p38 was further confirmed by pull down assay using magnolol conjugated to Sepharose 4B beads. The specific p38 inhibitor SB203580 abrogated the LPS-induced NF-${\kappa}B$/Rel activation, whereas the selective MEK-1 inhibitor PD98059 did not affect the NF-${\kappa}B$/Rel. Collectively, the results of the series of experiments indicate that magnolol inhibits iNOS gene expression by blocking NF-${\kappa}B$/Rel and p38 kinase signaling.

• Journal of Microbiology and Biotechnology
• /
• v.10 no.2
• /
• pp.258-263
• /
• 2000

2-Hydroxy-6-oxo-6phenylhexa-2,4-dienoate (HOPDA) hydrolase catalyzes the hydrolytic cleavage of HOPDA to bemzpate and 2-hydroxypenta-2, 4-dienoate (HPD) during microbial catabolism of biphenyl and polychlorinated biphenyls. A HOPDA hydrolase gene (pcbD) was isolated from the genomic library of Pseudomonas sp. P20 and designated as pCNUO1201; a 7.5-kb XbaI DNA fragment from Pseudomonas sp. P20 was inserted into the pBluescript SK(+) XbaI site. E. coli HB101 harboring pCNU1201 exhibited HOPDA hydrolase activity. The open reading frame (ORF) corresponding to the pcbD gene consisted of 855 base pairs with an ATG initiation codon and a TGA termination codon. The ORF was preceded by a rebosome-binding sequence of 5'-TGGAGC-3' and its G+C content was 55 mol%. The pcbD gene of Pseudomonas sp. P20 was located immedeately downstream of the pcbC gene encoding 2,3- dihydroxybiphenyl 1,2-dioxygenase, and approximately 4-kb upstream of the pcbE gene encoding HPD hydratase. The pcbK gene was able to encode a polypeptide with a molecular weight of 31,732 containing 284 amino acid residues. The deduced amino acid sequence of the HOPDA hydrolase of Pseudomonas sp. P20 exhibited high identity (62%) with those of the HOPDA hydrolases of P. putida KF715, P. pseudoalcaligenes KF707, and Burkholderia cepacia LB400, and also significant homology with those of other hydrolytic enzymes including esterase, transferase, and peptidase.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.11a
• /
• pp.125-128
• /
• 1998

Electroluminescent(EL) devices based on organic thin films have attracted lots of interests in large-area light-emitting display. One of the problems of such device is a lifetime, where a degradation of the cell is possibly due to an organic layer's thickness, morphology and interface with electrode. In this study, light-emitting organic electroluminescent devices were fabricated using Alq$_3$(8-hydroxyquinolinate aluminum) and TPD(N,N'-diphenyl-N,N'-bis(3-methylphenyl)-[1-1'-biphenyl]-4,4'-diamine).Where Alq$_3$ is an electron-transport and emissive layer, TPD is a hole-transport layer. The cell structure is ITO/TPD/Alq$_3$/Al and the cell is fabricated by vacuum evaporation method. In a measurement of current-voltage characteristics, we obtained a turn-on voltage at about 9 V. And we used other buffer layer of PPy(Polypyrrole) with ITO/PPy/TPD/Alq$_3$/Al structure. We observed a surface morphology by AFM(Atomic Force Microscopy), UV/visible absorption spectrum, and PL(Photoluminescence) spectrum. We obtained the UV/visible absorption peak at 358nm in TPD and at 359nm in Alq$_3$, and at 225nm and the PL peaks at 410nm in TPD and at 510nm in Alq$_3$ and at 350nm. We also studied EL spectrum in the cell structure of ITO/TPD/Alq$_3$/Al and ITO/PPy/TPD/Alq$_3$/Al and we observed the EL spectrum peak at 510nm from our cell

• Korean Journal of Materials Research
• /
• v.21 no.4
• /
• pp.212-215
• /
• 2011

New organic light-emitting diodes with structure of indium-tin-oxide[ITO]/N,N'-diphenyl-N, N'-bis-[4-(phenyl-m-tolvlamino)-phenyl]-biphenyl-4,4'-diamine[DNTPD]/1,1-bis-(di-4-poly-aminophenyl) cyclohexane[TAPC]/bis(10-hydroxy-benzo(h)quinolinato)beryllium[Bebq2]/Bebq2:iridium(III)bis(2-phenylquinoline-N,C2')acetylacetonate[(pq)2Ir(acac)]/ET-137[electron transport material from SFC Co]/LiF/Al using the selective doping of 5%-(pq)2Ir(acac) in a single Bebq2 host in the two wavelength (green, orange) emitter formation were proposed and characterized. In the experiments, with a 300${\AA}$-thick undoped emitter of Bebq2, two kinds of devices with the doped emitter thicknesses of 20${\AA}$ and 40${\AA}$ in the Bebq2:(pq)2Ir(acac) were fabricated. The device with a 20${\AA}$-thick doped emitter is referred to as "D-1" and the device with a 4${\AA}$-thick doped emitter is referred to as "D-2". Under an applied voltage of 9V, the luminance of D-1 and D-2 were 7780 $cd/m^2$ and 6620 $cd/m^2$, respectively. The electroluminescent spectrum of each fabricated device showed peak emissions at the same two wavelengths: 508 nm and 596 nm. However, the relative intensity of 596 nm to 508 nm at those wavelengths was higher in the D-2 than in the D-1. The D-1 and D-2 devices showed maximum current efficiencies of 5.2 cd/A and 6.0 cd/A, and color coordinates of (0.31, 0.50) and (0.37, 0.48) on the Commission Internationale de I'Eclairage[CIE] chart, respectively.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.11
• /
• pp.4641-4645
• /
• 2015

The present investigation was designed to assess the anticancer activity of six different leaf extracts (ethyl acetate, methanol, chloroform, petroleum ether, n-butanol, and water soluble) of Abelia triflora on A-549 human lung adenocarcinoma epithelial cells. A-549 cells were exposed to $10-1000{\mu}g/ml$ concentrations of the leaf extracts of A. triflorafor 24 h and then percentage cell viability was assessed by 3-(4,5-dimethylthiazol-2yl)-2,5-biphenyl tetrazolium bromide (MTT) assay. The results showed that leaf extracts of A. triflora significantly reduced the viability of A-549 cells in a concentration-dependent manner. Decrease was recorded as 31% with ethyl acetate, 36% with methanol, 46% with chloroform, 54% with petroleum ether, 62% with n-butanol, and 63% with water soluble extracts at $1000{\mu}g/ml$ each. Among the various plant extracts, ethyl acetate extract showed the highest decrease in the percentage cell viability, followed by methanol, chloroform, petroleum ether, n-butanol, and water soluble extracts. Our results demonstrated preliminary screening of anticancer activity of different soluble extracts of A. triflora extracts against A-549 cells, which can be further used for the development of a potential therapeutic anticancer agents.