• Applied Chemistry for Engineering
• /
• v.21 no.3
• /
• pp.272-277
• /
• 2010

To replace current expensive photobioreactor, this study was conducted to develop low-cost photobioreactor made of polyethylene bag. In previous study, optimal culture conditions of Spirulina platensis NIES 39 have been established, and based on these, the study of biological carbon dioxide fixation has been conducted. The maximum growth was the biomass 2.677 g/L at conditions of 10% $CO_2$, 0.1 vvm. It was shown that $F_{CO_2}$ was 4.056 g $CO_2$/L and $R_{CO_2}$ was 0.312 g $CO_2$/L/day. But, compared with the data at conditions of 5% $CO_2$, 0.1 vvm, $FE_{CO_2}$ was shown 52.372% which is half of it. Regarding the effect of $CO_2$ following illumination, the growth revealed that the input conditions, for 10 min per 3 h, were excellent in the light. $CO_2$ in absent light. $CO_2$ concentration and flow rate were 5% $CO_2$, 0.1 vvm, respectively. Finally, the addition of $CO_2$ was ineffective in the absence of light.

• Korean Journal of Organic Agriculture
• /
• v.32 no.1
• /
• pp.75-90
• /
• 2024

Biochar is a solid substance with a high carbon content, as it is made out of biomass pyrolyzed under the condition of limited oxygen. This product has attracted attention as an environment-friendly soil amendment because it contributes to carbon neutrally and has improvement effects on the soil environment. This study conducted an experiment to evaluate soil physiochemical properties and microbial community changes in a melon greenhouse according to the applied amount of biochar to investigate the growth characteristics and yields of melons accordingly. In soil physical properties, an increase in the applied amount of biochar resulted in a decrease in bulk density and an increase in porosity of the soil, improving air permeability. In soil chemical properties, an increase in the applied amount of biochar led to a increasing of pH, organic matter and available phosphate content. In the growth characteristics of melons, there was a growing tendency of plant height, leaf length and leaf width according to the increasing application of biochar until 10,000 kg/ha. Moreover, melon yields also increased as the amount of biochar, 13~16% higher in 10,000 kg/ha biochar application than no treatment. Compared differences among microbial communities in the soil according to the application of biochar and found that plant beneficial bacteria dominated in biochar treatments. This study demonstrated the potential of biochar as an effective soil amendment in melon greenhouse by showing improvements in soil physicochemical properties and microbial communities.

• Applied Chemistry for Engineering
• /
• v.19 no.6
• /
• pp.617-623
• /
• 2008

GTL (gas-to-liquid) fuel produced by the Fischer-Tropsch reaction of carbon monoxide (CO) and hydrogen ($H_2$) is expected to be one of the environmental friendly biomass based alternatives and blended to petrodiesel. In this study, the characteristic of the fuel was analyzed by its concentration differences after blending petrodiesel in domestic market with different amounts of GTL fuel which produced from Shell. Gas chromatography shows that GTL fuel consists of longer paraffin chain than common diesel. GTL fuel showed a high flash point, distillation, kinematic viscosity, and derived cetane number. In addition, GTL fuel showed lower lubricity due to low sulfur content.

• Clean Technology
• /
• v.29 no.3
• /
• pp.163-171
• /
• 2023

Hydrogen has been gaining a lot of attention as a possible clean energy source that can aid in reaching carbon neutrality. Currently, hydrogen production has relied on the steam reforming of fossil fuels. However, due to the carbon dioxide emissions caused by this process, hydrogen production based on the steam reforming of bio-oil derived from biomass has been proposed as an alternative approach. In order to use this alternative approach efficiently, one of the key issues that must be overcome is that the complexity of bio-oil, which has a large molecular weight and diverse functional groups of hydrocarbons, promotes the catalytic deactivation of nickel-based catalysts. In this review, research efforts to improve nickel-based catalysts for the steam reforming of bio-oil have been discussed in terms of the active phase, support, and promoters. The active phases are involved in activating C-C and C-H bonds of high-molecular-weight hydrocarbons, and noble and transition metals can be utilized. In terms of the support and promoters, the catalytic deactivation of Ni-based catalysts can be inhibited by utilizing reactive lattice oxygen for support or by suppressing the acidity. The development of active and stable Ni-based reforming catalysts plays a critical role in clean hydrogen production based on bio-oils.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.4
• /
• pp.664-670
• /
• 2012

Experiments were conducted to find out the landscape effects and green manure production at the same time in farmland. Cornflower was grown in different soil texture with sand, sandy loam, loam, clay loam, and was sowing with autumn and spring respectively. The overwintering rate of cornflower was at 58.7% in average, and the treatment at sand soil showed 62.1% that was highest among other soils, which cornflower is possible to winter landscape crop. After flowering of cornflower, the contents of total nitrogen (T-N) and total carbon (T-C) in plant were 15.0 and $409.2g\;kg^{-1}$, respectively, and the carbon-nitrogen ratio (C/N) was 28.6. The yield of cornflower biomass, which will be returned to soil as green manure, recorded $1,210{\sim}3,920kg\;ha^{-1}$ at the spring seeding higher than the autumn seeding as $1,540{\sim}3,170kg\;ha^{-1}$, and the biomass treated by soil texture were showed that the treatments at the clay loam had been the largest yields both spring and autumn seeding among at other treatment of soil. The heights of cornflower regardless of soil treatments were 52.8 to 73.6 cm at the autumn seeding and 35.5 to 79.2 cm at the spring seeding although it was more significant variation at the soil textures than the seeding periods. The flowering periods of cornflower ranged from $17^{th}$ to $20^{th}$ in May at the autumn seeding and from $19^{th}$ to $20^{th}$ in June at the spring seeding, which was faster 30 days approximately at the autumn seeding than the spring seeding. In a view of the cornflower application as green manure after flowering, the autumn seeding, when considered to combine with following crops, was more suitable and various than the spring seeding, even though the yield at spring seeding was higher than one at autumn seeding.

• Microbiology and Biotechnology Letters
• /
• v.9 no.2
• /
• pp.83-89
• /
• 1981

Several kinds of organic acids, alcohols, aromatic compounds and sugars as carbon sources were tested in order to produce the cell mass of Rhizopus oryzae which is used in part of food processing or organic acid fermentation. Sodium acetate among them was good enough for carbon source as well as glucose under the concentration of one percent. All nitrogenous substances tested such as ammonium, nitrate or organic nitrogen compounds were well used by this strain of Rhizopus oryzae as nitrogen source. Ammonium sulfate among inorganic nitrogen compounds was most utilized as a nitrogen source in glucose or acetate medium. This strain did not require any growth factors such as yeast extract. The following composition of medium was therefore determined in order to produce the cell mass of Rhizopus oryzae: Na-acetate 1 %, (NH$_4$)$_2$SO$_4$ 0.2%, $K_2$HPO$_4$ 0.05%, MgSO$_4$.7$H_2O$ 0.01%, NaCl 0.01% (PH 5.5). The cell wall of mycelium grown in above medium was lysed optimally at pH 6.5 and 5$0^{\circ}C$ by the action of Strepzyme 115-5. On producing protoplast from mycelium by enzymatic action, almost all of the mycelium was damaged after 4hrs of treatment.

• Korean Journal of Agricultural Science
• /
• v.45 no.2
• /
• pp.197-203
• /
• 2018

Biochar is the carbon solid produced through the pyrolysis of a biomass from organic sources such as agricultural waste, animal manure, and sludge under limited or anaerobic conditions. Biochar has the effect of reducing greenhouse gases through the carbon sequestration method; additionally, biochar is known to function as a soil amendment. This experiment was conducted to evaluate the application of biochar on the growth characteristics of Chinese cabbage at Chungnam National University in Daejeon, Korea. The Chinese cabbage was grown for 50 days in a glasshouse in pots. A pruning branch was used to produce the bead and pellet forms of biochar through pyrolysis. The biochar was added to the soil at 0, 2, and 5% by weight. The Chinese cabbage with the 2% treatment of the bead form of biochar had the highest fresh weight ($149.43{\pm}15.92g\;plant^{-1}$) which was increased by 10% compared to the control ($136.91{\pm}31.46g\;plant^{-1}$). Moreover, for the 5% treatment of the bead form of biochar ($60.91{\pm}9.82g\;plant^{-1}$), the growth decreased by 57% compared to the control. As the content of the bead form of biochar increased, the shoot dry weight, leaf number, leaf length and lead width that appeared decreased. An increase in the total organic matter, Avail. $P_2O_5$, Ex. cation and EC was observed when the biochar content was increased. Our results support the application of 2% biochar in the bead form for increased growth of Chinese cabbage.

• Journal of Wetlands Research
• /
• v.20 no.4
• /
• pp.363-369
• /
• 2018

One of the recent environmental problems is climate change due to the increase of atmospheric $CO_2$, which causes ecological changes and various environmental problems. Therefore, various studies are being carried out to reduce $CO_2$ in the world in order to solve various environmental problems caused by increase of $CO_2$. The $CO_2$ reduction using microalgae is an environmentally friendly method by using photosynthesis reaction of microalgae. However, most studies using single species. There is no study on the $CO_2$ fixing efficiency of microalgae in natural rivers. Therefore, this study was to identify the microalgae in the Sum river and to analyze the growth characteristics of microalgae in the river to obtain optimal culture conditions. And the changes of biomass and chlorophyll-a of microalgae were analyzed according to $CO_2$ concentration and injection rate. The purpose of this study was to investigate the fixing efficiency of carbon dioxide in microalgae in natural rivers. Six kinds of dominant species were observed as a result of the identification of microalgae in Sum river(Ankistrodesmus falcatus, Scenedesmus intermedius, Selenodictyum sp., Xanthidium apiculatum var. laeve, Cosmarium pseudoquinarium, Dictyosphaerium pulchellum). All of these species were green algae. Biomass and chlorophyll-a increased with the increase of $CO_2$ concentration and biomass and chlorophyll-a increased faster flow rate at the same $CO_2$ concentration. Also, the quantity of $CO_2$ fixation on the microalgae tended to be higher when the flow rate of injected gas was faster. This study can be referred as being significant in the micro-algae in river. In addition, the optimal conditions for $CO_2$ fixation of microalgae in rivers and the quantification of the quantity of $CO_2$ fixation from microalgae in rivers can be used as basic data for future policy of $CO_2$ reduction.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.30 no.2
• /
• pp.175-187
• /
• 1997

Benthic community structure was studied in Chinhae Bay during 3 years from June 1987 to May 1990, based on the samples from 12 stations on the seasonal, bimonthly or monthly basis (lim and Hong, 1994a, b). A total of 287 species was sampled with mean density of $1045.5\;ind./m^2$ and biomass of $98.48g/m^2$ during studyperiods. Of these species, there were 91 species of crustaceans $(31.7\%)$, 88 of polychaetes $(30.7\%)$, 56 of molluscs $(19.5\%)$, 22 of echinoderms and 30 of the micellaneous species. Polychaetes were density-dominant faunal group with a density of $824.7\;ind./m^2$, comprising of $18.6\%$ of the total density of the benthic animals. It was followed by molluscs with $14.62\;ind./m^2$ $($14.4\%\;of\;the\;total\;density)$ crustaceans with $50.5\;ind/m^2\;(4.6\%)$ and echinoderms with $13.4\;ind/m^2\;(4.6\%)$. Molluscs were the biomass-dominant faunal group with a mean biomass of $54.62\;g/m^2$. It was followed by polychaetes with $21.74\;g/m^2$ and echinoderms with $6.66\;g/m^2$. Based on community analysis, species richness, diversity and evenness showed decreasing trends toward the inner bay from outer stations, whereas dominance showed increasing. The three most dominant species Lumbrineris longifolia, Paraprionospio pinnata and Theora fragilis had densities over $40\%$ of the total density of benthic organisms in Chinhae Bay. Seasonal changes of benthic communities in the inner bay were high compared to those of the outer bay. It was mainly due to the occurrence of hypoxic condition in the inner area of the bay. Cluster analysis showed that the benthic community could be divided into four stational groups, that is, Group 1, the innermost area, which received the most heavy anthropogenic effects including seawage and waste water, Group II, the central area of the bay, Group III, the transitional area, Group IV, the mouth pan of the bay exposed to the open sea. The areal groups based on the environmental factors coincided with the zonal groups from the species composition. This fact suggests that the overall spatial distribution of macrobenthos in Chinhae Bay was controlled by the sediment organic carbon content of the bay.

• Korean Chemical Engineering Research
• /
• v.59 no.1
• /
• pp.127-137
• /
• 2021

Air emission charge for nitrogen oxide as a precursor of fine dust has been introduced and implemented within the country from 2020. Therefore, the development of economical combustion technology for NOx reduction has got more needed urgently. This study investigated the air-staging effect as a way to reduce the NOx during combustion of domestic unused forest biomass, recently possible to secure REC (Renewable Energy Certification) as a substitute for overseas wood pellets in a 0.1 MWth circulating fluidized bed combustion test-rig. Operating conditions were comparison with and without air-staging, the supply position of tertiary air (6.4 m, 8.1 m, 9.4 m in the combustor) and variation of air-staging ratio (Primary air:Secondary air:Tertiary air=91%:9%:0%, 82%:9%:9%, 73%:9%:18%). NO and CO concentrations in flue gas, profiles of temperature and pressure at the height of the combustion, unburned carbon in sampled fly ash and combustion efficiency on operating conditions were evaluated. As notable results, NO concentration with air-staging application under tertiary air supply at 9.4 m in the combustor reduced 100.7 ppm compared to 148.8 ppm without air-staging while, CO concentration increased from 52.2 ppm without air-staging to 99.8 ppm with air-staging. However, among air-staging runs, when tertiary air supply amount at 6.4 m in the combustor increased by air-staging ratio (Primary air:Secondary air:Tertiary air=73%:9%:18%), NO and CO concentrations decreased the lowest 90.8 ppm and 66.1 ppm, respectively. Furthermore, combustion efficiency at this condition was improved to 99.3%, higher than that (98.3%) of run without air-staging.