• KSBB Journal
• /
• v.8 no.4
• /
• pp.397-404
• /
• 1993

Two strains were isolated from the vinegar of Korean traditional fermented rice wine and the vine gar of fermented persimmon, respectively. These strains, designated as KM and BPV, were identified as the genus Acetobacter with respect to morphological, physiological, and biochemical characteristics. The Isolates oxidized ethanol to acetate and over-oxidized acetate or lactate to CO2 and H2O. They were positive in catalase test, while being negative in oxidase, gelatin liquefaction, VP test, H2O production and indole formation tests. No ${\gamma}$-pyrones ware produced from glucose and fructose. KM was tolerant of 11% ethanol while BPV was relatively sensitive to ethanol at a higher concentration than 5%. The guanine-plus-cytosine contents of the DNA of KM and BPV strains were 53.8 and 56.6 mol%, respectively. The cellular fatty acid compositions contained in these isolates were saturated straightchain C14:0 and C16:0,, and unsaturated straight-chain C18:1. Major ubiquinone system of KM was Q-9, but that of BPV was Q-10. In morphophysiological and biochemical aspects, KM strain was similar to Acetobacter pasteurianus. However, BPV strain was different from other Acetobacter type strains.

• Elastomers and Composites
• /
• v.54 no.4
• /
• pp.321-329
• /
• 2019

A series of poly(hyroxyamide)s (PHAs) was prepared by direct polycondensation reaction of 4,4'-(2,3-pyridinedioxy)dibenzoic acid and/or isophthalic acid with 3,3'-dihydroxybenzidine. The yield percentages of the products were high, and the inherent viscosities of the polymer in DMAc solution at 35℃ were 0.31-0.59 dL/g. All PHA polymers were found to be soluble in polar aprotic solvents such as DMAc, DMSO, NMP, and DMF. On the other hand, LiCl was required to dissolve IPHA-1 in aprotic solvents. Poly(benzoxazole)s (PBOs) were partially soluble in conc-H₂SO₄; IPBO-4, -5, and -6 were partially soluble in NMP only when LiCl was added to the solution, and the solution was heated. The PBO polymers showed a maximum weight loss in the temperature range of 654-680℃, and the char yields at 900℃ under nitrogen atmosphere exceeded 63%.

• International Journal of Stem Cells
• /
• v.15 no.1
• /
• pp.60-69
• /
• 2022

Organoids show great potential in clinical translational research owing to their intriguing properties to represent a near physiological model for native tissues. However, the dependency of organoid generation on the use of poorly defined matrices has hampered their clinical application. Current organoid culture systems mostly reply on biochemical signals provided by medium compositions and cell-cell interactions to control growth. Recent studies have highlighted the importance of the extracellular matrix (ECM) composition, cell-ECM interactions, and mechanical signals for organoid expansion and differentiation. Thus, several hydrogel systems prepared using natural or synthetic-based materials have been designed to recreate the stem cell niche in vitro, providing biochemical, biophysical, and mechanical signals. In this review, we discuss how recapitulating multiple aspects of the tissue-specific environment through designing and applying matrices could contribute to accelerating the translation of organoid technology from the laboratory to therapeutic and pharmaceutical applications.

• Korean Journal of Veterinary Service
• /
• v.20 no.1
• /
• pp.103-125
• /
• 1997

An epidemiologic study on pleuropneumonia in the slaughter pigs(Chonan and Asan area, Chungnam province, Korea) during the period of January 1994 through December 1995 was conducted. Isolation of A pleuropneumoniae was attempted in 425 pigs with pneumonic lesions. Biochemical properties, antimicrobial susceptibility, serotypes and pathogenicity of isolated A pleuropneumoniae were investigated. In addition, outer membrane protein(OMP) of the Isolates were extracted to determine its properties and immunogenicity in both mice and piglets The results obtained through this study were summarized as followed ; 1. Of 3, 395 slaughter pigs, pleuropneumonia was observed in 425 pigs(10.6%). A pleuropneumoniae was isolated from 22 pigs(5.2%) out of 425 pigs with pneumonic lesions. The biochemical properties of all isolates were same as those of reference A pleuropneumoniae strain. Among 22 isolates, 9, 1 and 12 isolates were serovar 2, 3 and 5, respectively. 2. The results of antimicrobial susceptibility test revealed that the isolates showed high susceptibility to ciprofloxacin and cephalothin, moderate susceptibility to amikacin, gentamicin, kanamycin and streptomycin, and low susceptibility to erythromycin, tylosin and sulfadimethoxin. 3. The isolates were varied in pathogenicity to mice. Median lethal dose of LE9402(serovar 2) and LE9511(serovar 5) were $9.2{\times}10^7$ CFU and $2.8{\times}10^7$%CFU, respectively. Specific pneumonic lesions were observed from the infected mice with clinical signs. Bacteria recovery rate was high in the lung, but low In heart blood and tracheas. 4. Serovar 2 was found to be more pathogenic than serovar 5 in guinea pig. Mortality on guinea pigs inoculated with serovar 2($5.4{\times}10^8-5.4{\times}10^6$CFU) and serovar 5($2.8{\times}10^8-2.8{\times}10^6$ CFU) was 20~40% and 40~80%, respectively. A severe hemorrhagic lesions and focal pneumonic lesions were observed from dead guinea pigs. Bacteria recovery rate was relatively higher in the lung than that of other organs. 5. In the SDS-PAGE analysis, OMP-enriched fractions of both isolates and reference strains contain common peptide bands equivalent to molecular weight of 17, 27, 42, 52 and 95Kd. In addition to common peptide bands, the bands which are specific to each isolate were also observed. The profiles of Sephadex G25 fractions showed 3 major peaks. The common peptide bands which were observed by SDS-PAGE of the crude OMPs were found in the peaks 1 and 2. 6. The OMPs extracted from serovar 2(LE9402) and serovar 5(LE9511) provided high level of protection in mice(70~80%) and pigs(100%). All animals inoculated with OMPs were seroconverted, showing micro-agglutination titer of 640 to 1280.

• Korean Chemical Engineering Research
• /
• v.49 no.5
• /
• pp.548-553
• /
• 2011

NCO terminated polyurethane prepolymers were synthesized from isophorone diisocyanate(IPDI), polycarbonate diol(PCD) and dimethylol propionic acid(DMPA). Subsequently, acrylic terminated polyurethanes were prepared by capping the NCO groups of polyurethane prepolymers with different types of acrylate monomers, such as 2-hydroxyethyl methacrylate(HEMA), 2-hydroxyethyl acrylate(HEA) and pentaerythritol triacrylate(PETA). The average particle sizes of the acrylic terminated polyurethane solutions were increased by capping acrylate monomers. Also, the prepared coating films showed better abrasion resistance and pencil hardness than those of pure waterborne polyurethanes. The coating film with PETA exhibited the best abrasion resistance and pencil hardness of coating films prepared with three acrylate monomers.

• Mycobiology
• /
• v.33 no.1
• /
• pp.30-34
• /
• 2005

This study investigated the biochemical changes of abnormal fruiting bodies grown under artificial environmental conditions in P. ostreatus. Abnormal mushroom growth during cultivation damages the production of good quality mushroom. This study showed that different environmental conditions produced morphological changes in the fruiting bodies of P. ostreatus. The fruiting bodies with morphological changes were collected and examined for differences in biochemical properties, enzyme activities, and carbohydrates composition. The enzyme activities assay showed that glucanase and chitinase activities decreased when the temperature was below or above the optimum cultivation temperature for P. ostreatus. The biochemical compositions of the abnormal mushroom were significantly different from the normal fruiting bodies. It was suggested that the changes in the biochemical composition of abnormal mushroom were caused by the unfavorable environmental conditions during mushroom cultivation.

• Journal of Korean Neurosurgical Society
• /
• v.51 no.6
• /
• pp.323-327
• /
• 2012

Objective : The purpose of this study was to verify the appropriateness of ovariectomized rats as the osteoporosis animal model. Methods : Twelve female Sprague-Dawley rats underwent a sham operation (the sham group) or bilateral ovariectomy [the ovariectomy (OVX) group]. Eight weeks after operations, serum biochemical markers of bone turnover were analyzed; osteocalcin and alkaline phosphatase, which are sensitive biochemical markers of bone formation, and C-terminal telopeptide fragment of type I collagen C-terminus (CTX), which is a sensitive biochemical marker of bone resorption. Bone histomorphometric parameters and microarchitectural properties of 4th lumbar vertebrae were determined by micro-computed tomographic (CT) scan. Results : The OVX group showed on average 75.4% higher osteocalcin and 72.5% higher CTX levels than the sham group, indicating increased bone turnover. Micro-CT analysis showed significantly lower bone mineral density (BMD) (p=0.005) and cortical BMD (p=0.021) in the OVX group. Furthermore, the OVX group was found to have a significantly lower trabecular bone volume fraction (p=0.002). Conclusion : Our results showed that bone turnover was significantly increased and bone mass was significantly decreased 8 weeks after ovariectomy in rats. Thus, we propose that the ovariectomized rat model be considered a reproducible and reliable model of osteoporosis.

• Korean Chemical Engineering Research
• /
• v.50 no.2
• /
• pp.191-197
• /
• 2012

Acrylic terminated polyurethane prepolymers were synthesized by capping the NCO groups of polyurethane prepolymers, prepared from isophorone diisocyanate (IPDI), polycarbonate diol (PCD) and dimethylol propionic acid (DMPA), with pentaerythritol triacrylate (PETA). Subsequently, silylated acrylic terminated prepolymers were prepared by capping the NCO groups of acrylic terminated polyurethane prepolymers with different types of silane coupling agents, glycidoxypropyl trimethoxysilane (GPTMS) or aminopropyl triethoxysilane (APS). The average particle size of pure waterborne polyurethane solution, measured by the dynamic light scattering method, was increased from 14.3 nm to 208.6 nm by adding PETA and APS. Also, the coating film of silylated acrylic terminated waterborne polyurethane showed better abrasion resistance and pencil hardness than that of pure waterborne polyurethane.

• Food Science and Preservation
• /
• v.30 no.5
• /
• pp.785-796
• /
• 2023

The aim of this study was to elucidate chemical structures and rheological properties of arabinogalactans (AGs) isolated from three legumes including black gram (BG), great northern bean (GNB), and California small white bean (CSWB). The ratio of galactose to arabinose (G/A) in three legumes increased in the order of BG > GNB > CSWB. The rheological measurements of 1-5% (w/v) AG solutions revealed Newtonian and non-Newtonian flow behaviors. BG exhibited yield stress, indicating plastic behavior. Small-amplitude oscillatory tests indicated viscoelastic properties of BG, GNB, and CSWB ranging from solid-like, paste-like, and liquid-like behaviors, respectively. Small-strain oscillatory tests were conducted to assess the structure recovery of the AGs after pre-shearing. G" values of BG and GNB increased, but those of CSWB remained constant after shearing. These results suggest that the chemical structures of the AGs, particularly their G/A ratios, influence their rheological properties.

• KSBB Journal
• /
• v.21 no.2
• /
• pp.157-163
• /
• 2006

A supercritical fluid process, called aerosol solvent extraction system(ASES), is especially suitable to the pharmaceutical, cosmetic and food industries due to its environmentally-friendly, non-toxic and residual solvent-free properties. In particular, the application of the ASES process to the processing of thermo-labile bioactive compounds has received attention of many scientists and engineers because of its low-temperature operating conditions. Unstable substances such as Vitamin-C and Vitamin-A can be effectively protected from degradation during the preparation process, because the ASES process is free from oxygen and moisture. In this study, Vitamin-C was formulated with 2-hydroxypropyl-${\beta}$-cyclodextrin (HP-${\beta$-CD) for enhancement of Vitamin-C stability and bioavailability using the ASES process. To investigate the influence of the preparation process on the stability of Vitamin-C, Vitamin-C/HP-${\beta}$-CD inclusion complexes were prepared using both conventional solvent evaporation method and ASES process, and stored in a 50 mM phosphate buffer solution of pH 7.0 at $25^{\circ}C$ for 24 hours. From the experimental results, the stability of the Vitamin-C/HP-${\beta}$-CD inclusion complex prepared from the ASES process was found to be much higher than that of pure Vitamin-C and the Vitamin-C/HP-${\beta}$-CD inclusion complex prepared by the solvent evaporation method. The stability of Vitamin-C was observed to increase with the decrease of temperature at a constant pressure or with the increase of pressure at a constant temperature.