Protoplasts were isolated from cotyledons of germinating Pinus densiflora S. et Z. seeds. The seeds were germinated for nine days, and excised embryonic cotyledons about 3-4mm long were incubated with Cellulase Onozuka R-10 and Macerozyme. After 8 hours of incubation, large number of viable protoplasts were isolated. Isolated protoplasts were cultured in a medium containing basal salts of $B_5$ medium, vitamines, amino acids, organic acid, sugars, and growth hormones. The first evidence of protoplast budding was observed after twelve hours in culture, and it suggested that high potential of the embryonic cotyledons for rapid cell division affected the early budding, rather than effect of culture medium was shown in twelve hours. The three- to four-cell stage was reached after three to four days of culture. Most cell divisions were achieved by additional buddings rather than equal binary cell division. No further cell division was observed beyond the four-cell stage. Protoplasts isolated from fully expanded cotyledons (germinated for 17 to 24 days) seldom initiated or failed to initiate cell division.
An, Ki-Seok;Cho, Won-Tae;Sung, Ki-Whan;Lee, Sun-Sook;Kim, Yun-Soo
Bulletin of the Korean Chemical Society
/
v.24
no.11
/
pp.1659-1663
/
2003
$Al_2O_3$ thin films were grown on H-terminated Si(001) substrates using dimethylaluminum isopropoxide [DMAl: $(CH_3)_2AlOCH(CH_3)_2$], as a new Al precursor, and water by atomic layer deposition (ALD). The selflimiting ALD process by alternate surface reactions of DMAI and $H_2O$ was confirmed from measured thicknesses of the aluminum oxide films as functions of the DMAI pulse time and the number of DMAI-$H_2O$ cycles. Under optimal reaction conditions, a growth rate of ~1.06 ${\AA}$ per ALD cycle was achieved at the substrate temperature of $150\;^{\circ}C$. From a mass spectrometric study of the DMAI-$D_2O$ ALD process, it was determined that the overall binary reaction for the deposition of $Al_2O_3\;[2\;(CH_3)_2AlOCH(CH_3)_2\;+\;3\;H_2O\;{\rightarrow}\;Al_2O_3\;+\;4\;CH_4\;+\;2\;HOCH(CH_3)_2]$can be separated into the following two half-reactions: where the asterisks designate the surface species. Growth of stoichiometric $Al_2O_3$ thin films with carbon incorporation less than 1.5 atomic % was confirmed by depth profiling Auger electron spectroscopy. Atomic force microscopy images show atomically flat and uniform surfaces. X-ray photoelectron spectroscopy and cross-sectional high resolution transmission electron microscopy of an $Al_2O_3$ film indicate that there is no distinguishable interfacial Si oxide layer except that a very thin layer of aluminum silicate may have been formed between the $Al_2O_3$ film and the Si substrate. C-V measurements of an $Al_2O_3$ film showed capacitance values comparable to previously reported values.
This study aims to examine absorption characteristics of toluene, isopropyl alcohol (IPA), ethyl acetate (EA), and ternary-compounds, all of which are widely used in industrial processes, by means of four types of commercial activated carbon substances. It turned out that among the three types of volatile organic compounds, the breakthrough point of activated carbon and that of IPA, whose affinity was the lowest, were the lowest, and then that of EA and that of toluene in the order. With the breakthrough point of IPA, which was the shortest, as the standard, changes in the breakthrough points of unary-compounds, binary-compounds, and ternary-compounds were examined. As a result, it turned out that the larger the number of elements, the lower the breakthrough point. This resulted from competitive adsorption, that is, substitution of substances with a low level of affinity with those with a high level of affinity. Hence, the adsorption of toluene-IPA-EA and ternary-compounds require a design of the activated carbon bed based on the breakthrough of IPA, and in the design of activated carbon beds in actual industries as well, a substance whose level of affinity is the lowest needs to be the standard.
Recently, the component technology has played a main role in software reuse. It has changed the code-based reuse into the binary code-based reuse, because components can be easily combined into the developing software only through component interfaces. Since components and component users have increased rapidly, it is necessary that the users of components search for the most proper components for HTML among the enormous number of components on the Internet. It is desirable to use web-document-typed specifications for component specifications on the Internet. This paper proposes to use XML component specifications instead of HTML specifications, because it is impossible to represent the semantics of contexts using HTML. We also propose the XML context-search method based on XML component specifications. Component users use the contexts for the component properties and the terms for the values of component properties in their queries for searching components. The index structure for the context-based search method is the inverted file indexing structure of term-context-component specification. Not only an XML context-based search method but also a variety of search methods based on context-based search, such as keyword, search, faceted search, and browsing search method, are provided for the convenience of users. We use the 3-layer architecture, with an interface layer, a query expansion layer, and an XML search engine layer, of the search engine for the efficient index scheme. In this paper, an XML DTD(Document Type Definition) for component specification is defined and the experimental results of comparing search performance of XML with HTML are discussed.
Light Naphtha is distillated from crude oil unit and separated into the methane, ethylene and propylene by boiling point difference in sequence. This separation is conducted using a series of binary-like columns. This separation method is known that the energy consumed in the reboiler is used to separate the heaviest components and most of this energy is discarded as vapor condensation in the overhead cooler. In this study, the first two columns of the separation process are replaced with the Petlyuk column. A structural design was exercised by the stage computation with ideal tray efficiency in equilibrium condition. Compared with the performance of a conventional system of 3-column model, The design outcome shows that the procedure is simple and efficient because the composition of the liquid component in the column tray was designed to be similar to the equilibrium distillation curve. The performance of the new process indicates that an energy saving of 12.1% is obtained and the cost savings of 44 million won per day based on gross domestic product is reduced under same total number of trays and the initial investment cost is saved.
Kim, Eunhye;Ji, HongGeun;Kim, Jina;Park, Eunil;Ohm, Jay Y.
KIPS Transactions on Software and Data Engineering
/
v.10
no.9
/
pp.359-366
/
2021
A number of construction companies in Korea invest considerable human and financial resources to construct a system for managing apartment defect data and for categorizing repair tasks. Thus, this study proposes machine learning models to automatically classify defect complaint text-data into one of the sub categories of 'finishing work' (i.e., one of the defect repair tasks). In the proposed models, we employed two word representation methods (Bag-of-words, Term Frequency-Inverse Document Frequency (TF-IDF)) and two machine learning classifiers (Support Vector Machine, Random Forest). In particular, we conducted both binary- and multi- classification tasks to classify 9 sub categories of finishing work: home appliance installation work, paperwork, painting work, plastering work, interior masonry work, plaster finishing work, indoor furniture installation work, kitchen facility installation work, and tiling work. The machine learning classifiers using the TF-IDF representation method and Random Forest classification achieved more than 90% accuracy, precision, recall, and F1 score. We shed light on the possibility of constructing automated defect classification systems based on the proposed machine learning models.
KSCE Journal of Civil and Environmental Engineering Research
/
v.38
no.6
/
pp.887-894
/
2018
An electric vehicle is emerging as an alternative to the response of global climate change and sustainability. However, an Electric vehicle has not been popular due to the constraints such as its price or technical limitations. In order to analyze the effect of purchasing electric vehicles, this study conducted a binary logistic regression model that demonstrates the relation between purchasing and influencing variables. Variables which have high correlation were excluded from the model through the correlation analysis to prevent multicollinearity. Socio-economic variables such as the number of owned vehicles, sex, ages are not significant. On the other hand, Variables related to prices, charging and policy are found to have a significant to effect on the purchase of electric vehicles. In accordance with the model estimated result, it seems to be necessary to improve the charging incentives, or to provide electric car information and to expand opportunities for experience electric vehicles. The result is also expected to be helpful for spreading electric vehicles and formulating policies.
Objectives: The purpose of this study was to assess the effect of Yigong-san on anorexia in children by conducting a systematic review and meta-analysis of randomized controlled trials (RCTs). Methods: Eleven electronic databases were searched on May 30, 2022 to collect relevant studies. All studies published up to the search date were considered. RCTs reporting the effect of Yigong-san on the treatment of anorexia in children were included. The primary outcome was an improvement in clinical anorexia symptoms after treatment. In this meta-analysis, continuous and binary outcomes were assessed, and the data were presented as the mean difference and risk ratio with their 95% confidence intervals. The risk of bias was assessed using the Cochrane Collaboration's risk of bias tool. Results: A total of nine studies were included in this systematic review. The treatment group (Yigong-san only or Yigong-san plus conventional treatment) showed a statistically significant effect compared to the control group (conventional treatment only) in total effective rate (Yigong-san only: RR 1.26, 95% CI 1.17, 1.36, I2=0%; Yigong-san plus conventional treatment: RR 1.32, 95% CI 1.18, 1.47, I2=0%), clinical symptoms, some of the anthropometric outcomes, and biological markers related to appetite and growth in children with anorexia. No serious adverse events related to Yigong-san were reported. Conclusions: Yigong-san showed statistically significant effects as a treatment for anorexia in children. However, the number of studies included in the meta-analysis was insufficient, and the herbs contained in the Yigong-san used in the included studies were not standardized. Future research should focus on the implementation of methodologically robust clinical research.
This study compared and analyzed the effect of the burden of household expenditure in the metropolitan and non-metropolitan areas on the intention to childbirth intention to married women using a panel logit model. To this end, this analysis targeted married women aged 25 to 39 who are highly likely to be fertile. The main results are as follows; First of all, it was confirmed that the economic power of spouse can be an important factor in the childbirth intention regardless of region. Second, it was found that the higher the satisfaction of marriage had a positive effect on the childbirth intention, and also higher the value that children must have, the higher the childbirth intention. Third, it was confirmed that the burden of household expenditure is the most important factor in the willingness to childbirth intention, excluding factors such as the number of existing children. In particular, the burden on education spending in both the capital region and non-capital region was found to be a key reason for the decrease in the childbirth intention. Lastly, the burden of household expenditure showed different effects on childbirth intention on depending on the region. Specifically, in the capital region, medical spending and loans had a greater impact, while, in the non-capital region, transportation and communication costs had a greater impact on childbirth intentions. Through the results, this study confirmed the implication that easing the burden on household expenditure is continuously necessary to enhance childbirth, and that discriminatory policy approaches are required depending on the area of residence.
Journal of Korea Entertainment Industry Association
/
v.13
no.4
/
pp.27-37
/
2019
This study empirically identified and sought implications for the degree of desire by film crews to participate in overseas production and the factors affecting them, based on the recognition that the active participation of skilled film crews in overseas production and joint ventures can be an alternative to the poor treatment of domestic film industry sites and the reduction of job losses due to problems with career barriers. In order for respondents to verify research questions, binomial logistic and marginal effects analysis using SPSS and STATA, the data obtained by surveying 402 film crews operating in various areas. The notable findings are as follow: First, about 65%(263 people) of the respondents expressed their desire to participate in overseas activity, indicating that a considerable number of film crews are looking forward to opportunities with overseas productions. Second, major factors that have a positive effect on film crews' need to participate in overseas activities have been found to be professionality, artistic identity, Korean Wave persistence, and career barriers. In other words, the higher the professionality, the more clearly the identity of the artist, the more positive expectations of the possibility of the Korean Wave continuing, and the more serious the problem of career disability, the clearer was the desire to participate in overseas production and joint-work activities.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.